At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the timing to make sure its properly lined up, the belt may have slipped and jumped a tooht, or loose tensioner on the timing belt. Confirming the timing will give you a good clue as to where to look next.
Under hood left ,., a gray box beside the relay box ,., tow sections ,., lower is 2 rows ,., second row jump between 3 & 5 ,., Leave the jumper there start If started ,., You have ,., code P1455 (fuel tank sensor) need to be replaced to clear the code As long you changed the fuel pump ,., it's Okay to drive Ahmed
on all four wheels their will be a sensor and 'sensing' plate. First step is to clean these all up with a parts cleaner, and try again. If one of the sensors cant pick up a signal from the plate, then this will cause a fault. If no luck, inspect the wiring to and from the sensors, for obvious damage/short circuits. Hopefully this would have sorted it, otherwise their could be a faulty abs sensor
its in the fuel tank. remove the seat in the rear and lift the floor covering theres an access cover to get to the fuel pump there. if there is a hanger assembly available for it i suggest you buy that it comes complete and ready to install. hope this helps
×