Question about 2006 Chevrolet Trailblazer

Open Question

2006 trailblazer 4.2 water pump torque specs?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: need torque specs for rod bearing caps on 1995 toyota terel 4 cyl

1.6 engine 36 ft lbs 1.8 engine 36 ft lbs 2.0 engine 49 ft lbs

Posted on Apr 11, 2009

mkv0525
  • 358 Answers

SOURCE: what are specs for water pump bolts for 2001

Home | Account | Contact ALLDATA | Log Out | Help ALL TUNE & LUBE DDG AUTOMOTIVE Select Vehicle | New TSBs | Technician's Reference Component Search: Conversion Calculator 2001 Ford Taurus V6-3.0L VIN 2 Flex Fuel Vehicle Level Specifications Mechanical Specifications Water Pump Water Pump Water Pump Notes Engine Front Cover and Water Pump Assembly 25 Nm (18 lb-ft) © 2009 ALLDATA LLC. All rights reserved. Terms of Use

Posted on Jun 10, 2009

  • 14036 Answers

SOURCE: head bolt torque spec

STARTING OUT YOU HAVE TO REPLACE THE OLD BOLTS DUE TO STRETCHING.BESURE TO USE NEW BOLTS LUBRICATE NEW BOLTS IN OIL.BESURE TO USE TORQUE SEQUENCE GUIDE OR PHOTO.YOU GOING TO MAKE THREE PASSES * FIRST* PASS YOU TORQUE ALL HEAD BOLTS TO 12 TO 18 FT LBS * SECOND *PASS YOU TORQUE ALL BOLTS TO 26 TO 33 FT LBS.*THIRD PASS YOU TORQUE IT TO 44 FT LBS.THATS THE FINAL TORQUE.

Posted on Aug 16, 2009

ZJLimited
  • 17970 Answers

SOURCE: i'm looking for torque specs on the water pump

Fig. Exploded view of the water pump assembly mounting-4.3L engine

fdf58a9.jpg

To install:

  1. Clean the gasket mounting surfaces.
    NOTE The water pumps on some of the engines covered may have been installed using sealer only, no gasket, at the factory. If a gasket is supplied with the replacement part, it should be used. Otherwise, a 1 / 8 in. (3mm) bead of RTV sealer should be used around the sealing surface of the pump.
  2. Apply sealant to the water pump retainer threads.
  3. Install or connect the following:

    Water pump using a new gasket. Tighten the water pump retainers to 89 inch lbs. (10 Nm) for 4.2L engines, or to 30 ft. lbs. (41 Nm) for 4.3L engines. For 5.3L engines, tighten the bolts to 11 ft. lbs. (15 Nm), then to 22 ft. lbs. (30 Nm). Coolant hose(s) Water pump pulley. Tighten the pulley bolts to 18 ft. lbs. (25 Nm). Fan or fan and clutch assembly Serpentine drive belt (if equipped) by positioning the belt over the pulleys and carefully allow the tensioner back into contact with the belt. V-belts (if equipped) and adjust the tension Upper fan shroud Negative battery cable
  4. Refill the engine cooling system.
  5. Run the engine and check for leaks.

Hope this help to solve it; rebember rated this post. Good luck.

Posted on May 01, 2010

Testimonial: "thank you for your time it was helpful"

  • 1 Answer

SOURCE: 2006 Chevy Trailblazer Water Pump

how do you replace a water pump on an 06 chevy trailblazer?

Posted on Oct 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4610 ford diesel tractor water pump bolt torque settings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the water pump is cast iron use the full torque specification.
If the water pump is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26186159-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 05, 2016 | Ford Cars & Trucks

1 Answer

What are the torquing specs for a water pump on a 1992 Toyota pickup with a 22RE engine


the water pump bolts torque specs is T=1.85 kg-m (13 ft-lb). you must set your torque wrench nicely and carefully not to break the bolts then there you go.

Apr 03, 2016 | Toyota Cars & Trucks

2 Answers

How many quarts of transmission fluid in a 4.2


11.2 quarts from dry, including torque converter. When just changing the filter, between 5-7 quarts. Dexron 6 is the best, and newest technology from GM.

Oct 02, 2015 | 2004 Chevrolet TrailBlazer

1 Answer

What are the torque specs for the water pump housing for a 1998 cadillac deville


That's a tough one Tom. I don't think that spec is in the standard shop manual. If the dealer won't tell you, you might check the size and grade # of the bolts and then check the generic torque vs size chart often found in the front of most shop manuals. Use sealant on threads. Sorry to not be more help.

Dec 18, 2014 | Cadillac Cars & Trucks

2 Answers

What are the torque specifications for the transmission pan


Tighten the oil pan to transmission case bolts alternately and evenly to 11 N·m (97 lb in) notice not foot lbs. hope this helps

Aug 02, 2014 | 2006 Chevrolet Trailblazer

1 Answer

Need torque specs. for water pump to 2004 chrysler pacific


I am certain I have the information you need. The problem is I am having trouble locating it in the FACTORY service manuals, terminology differs from what your searching for.

Torque for the Vibration Damper bolt is 115 Nm (85 ft.lbs.)

I am still trying to locate the pump torque.

Mar 28, 2013 | 2004 Chrysler Pacifica

1 Answer

What are the torque specs for a 2003 Chevrolet trailblazer thermostat housing?


The 2003 Chevrolet Vortec 5300 generated 285 horsepower at 5,200 rpm and 325 ft.-lbs. of torque at 4,000 rpm. --------------------------------------------------------------
VVDI VAG Vehicle Diagnostic

Mar 26, 2013 | Cars & Trucks

1 Answer

What are the torqe specs for 2006 H3 fan/clutch and water pump


special tools you need EN 48543 FAN CLUTCH HOLDING TOOL. J41240 FAN CLUTCH REMOVER AND INSTALLER. TORQUE FOR FAN CLUTCH NUT 41 LB FT. FOUR BOLTS TO FAN BLADE TORQUE 20 LB FT.WATER PUMP BOLTS TORQUE TO 11 LB FT. DONT NEED SPECIAL TOOLS REMOVE WATER PUMP.

Nov 29, 2012 | 2006 Hummer H3

1 Answer

I need to know the correct torque specs for the 4 bolts that hold the a/c compressor on my 2003 Suzuki Aerio. In order to replace the water pump it was necessary to remove the compressor. The book supplied...


The ac compressor bracket bolts are to be torqued to 40 ft lbs, as far as the compressor itself you can just hand tighten bolts, there is no specs for compressor bolts just bracket, the bolts are just snug.

Aug 28, 2012 | Suzuki Aerio SX Cars & Trucks

1 Answer

2004 chevy trailblazer 4 wheel drive front axle lock nut torque setting


The torque spec is 103ft lbs. Most axle nuts on 4wd are around 100lbs, I have worked on cars for a while, so I usually tighten it down "wrist" tight, and give it a 1/4 turn. Always ends up being between 90-105lbs. Thanks.

Mar 16, 2011 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

Related Topics:

539 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...