Question about 1993 Buick LeSabre

Open Question

How to replace water pump on a 93 lesabre - 1993 Buick LeSabre

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
plkruger
  • 32 Answers

SOURCE: Hose from water pump to intake manifold above and behind water pu

this is a water pump bypass hose connector to the manifold, take the broken piece to a parts store and show it to them, it should have the threads still broken off in the manifold so explain that. To remove the broken piece ask for a EZ OUT to fit the piece you took to the store.
It is common for these to become brittle and break off but it is a simple fix.

Posted on Feb 21, 2009

Ad
  • 106 Answers

SOURCE: 2000 buick lesabre - water pump replacement

first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Posted on Mar 19, 2009

tonycdrive
  • 2 Answers

SOURCE: 1997 Buick Lesabre Water Pump problem

THE POWER STEERING PUMP PULLEY --- ARRGGH...Not a problem. The power steering pump is held by two bolts. Use a socket and remove the top bolt and loosen the bottom bolt. Be careful not to completely remove the bottom bolt. The PS pump will loosen up enough so that you can push it towards the firewall and you will JUST have enough room to remove the waterpump bolts. Its tight but it will squeeze out.

Posted on Dec 16, 2009

joshnaz
  • 186 Answers

SOURCE: i need help with my 93 lesabre, im trying to

Do you have the new water pump in front of you to reference the bolt holes. I'm not sure why you think you need to remove the engine mount.

5a12ddd.gif

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing water pump from my 1996 buick 3800


Hello fellow Buick LeSabre owner. A few year's ago I replaced the water pump on my 1994 LeSabre and I too encountered a few obsticals. After I figured out how to address these problems I was thjen able to install my new water pump. To assit other LeSabre owners, I posted the actual process on the web. See the attached link for my solution ("Deano/Illinois") and several other comments from other Buick LeSabre owners. The entire process will take you about three hours. Good Luck!

http://wiki.answers.com/Q/How_do_you_replace_the_water_pump_without_removing_the_engine_mount_located_on_a_1995_Buick_LeSabre&updated=1&waNoAnsSet=2

Please rememeber to rate my solution. Thanks!

Jan 29, 2011 | 1996 Buick LeSabre

2 Answers

How do I change the water pump on a 1998 buick LeSabre?


it's easy and if you youtube it it will show you step by step , good luck

Jan 23, 2011 | 1998 Buick LeSabre

3 Answers

Do you have to take the motor out of a 1990 buick lesabre 3800 V6 to replace the water pump?


Hello fellow LeSabre owner. A few year's ago I replaced the water pump on my 1994 LeSabre and I too encountered a few obsticals. After I figured out how to address these problems I was then able to install my new water pump. To assit other LeSabre owners, I posted the actual process that I used on the web. See the attached link for my solution ("Deano/Illinois") and several other comments from other Buick LeSabre owners. The entire process will take you about three hours. Good Luck!

http://wiki.answers.com/Q/How_do_you_replace_the_water_pump_without_removing_the_engine_mount_located_on_a_1995_Buick_LeSabre&updated=1&waNoAnsSet=2

Please rememeber to rate my solution. Thanks!

Jan 22, 2011 | 1990 Buick LeSabre

1 Answer

1998 Buick LeSabre Limited water pump replacement ?


. Remove accessory electrical junction block,
and position aside. Loosen water pump pulley bolts.
Remove drive belt. Remove water pump pulley
bolts and pulley.
. Remove water pump bolts, water
pump and gasket. To install, reverse removal proced
ure using NEW gasket. Fill and bleed cooling
system.

Mar 28, 2010 | 1998 Buick LeSabre

2 Answers

I need help with my 93 lesabre, im trying to replace the water pump and 1 bolt is impossible to get so im trying to take off the engine mount to reach it... is there an easier way?


Do you have the new water pump in front of you to reference the bolt holes. I'm not sure why you think you need to remove the engine mount.

5a12ddd.gif

Mar 04, 2010 | 1993 Buick LeSabre

1 Answer

2000 buick lesabre - water pump replacement


first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Mar 17, 2009 | 2000 Buick LeSabre

1 Answer

Hose from water pump to intake manifold above and behind water pu


this is a water pump bypass hose connector to the manifold, take the broken piece to a parts store and show it to them, it should have the threads still broken off in the manifold so explain that. To remove the broken piece ask for a EZ OUT to fit the piece you took to the store.
It is common for these to become brittle and break off but it is a simple fix.

Feb 17, 2009 | 1993 Buick LeSabre

1 Answer

1993 buick lesabre


I'm trying to fix another problem on my lesabre and I saw your question here. I don't know when or if you even will need or read my answer, but I've changed the water pump before on my '93. It's not as impossible as you might think. I'm NOT that mechanically inclined. I'd be happy to describe it in detail if you are interested. Feel free to write me at tnslipp@comcast.net, and I'll see if I can help.

May 18, 2008 | 1993 Buick LeSabre

Not finding what you are looking for?
1993 Buick LeSabre Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...