Question about 2008 Mazda MAZDA6

1 Answer

How to change oil in 2008 mazda 6 - 2008 Mazda MAZDA6

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Get enough space from undeneath the car. Get a wrench ( most japs need a 17.. or 19mm) a plastic bowl of at least 5-6 lt capacity, get underneath the car, unscrew the bolt that is at the very bottom end of the engine, carefully at the last twisting mm's not to remove it quickly cause you'll make a mess, let the old oil drain to the bowl, get up, unscrew the top oil cap of the engine, let air get in and provide equal pressure to drain the oil completely, and when it happens, screw to bottom bolt back, tighten it and make sure the copper sealing ring is in good condition, ( otherwise change with new one to avoid leaks), fill with new oil fro above, taking filling indications every while, to make sure you filled the correct amount of oil, start the engine and wait untill the oil pressure warning red light turns off, turn off the engine, fill to the desired point, close the cap, and ...........you're done!!!

Posted on Sep 07, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Mazda 6 oil change

If DPF means Diesel Particulate Filter, no you don't need to change this cartridge. Somewhere near 120000Km you have to refill the additive tank with Eolys additive.

Posted on Jan 26, 2009

81vasquez
  • 34 Answers

SOURCE: How many quarts of oil does a 2004 mazda 6 need

4 and a half i would put five though

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mazda 2008 CX 7, had oil changed. I have a oil leak, wife started to work three day after oil change no oil in car. What could be wrong.


fix the oil leak as there is more oil coming out than you realized
could it be a loose or incorrectly fitted oil filter

Oct 19, 2015 | Mazda Cars & Trucks

1 Answer

2008 Mazda 9 Fuse Box DIagram


On this website, you find fuse box diagram and description

Mazda 6 (2006 - 2008)
Mazda 6 2006 2008 fuse box diagram Auto Genius

Mazda CX-9 (2007 - 2010)
Mazda CX 9 2007 2010 fuse box diagram Auto Genius

Dec 31, 2012 | 2010 Mazda CX-9

1 Answer

Is it easy to change the oil filter ?


Yes its not very hard to replace the oil filter on mazda 6.You don't need a special tool. Use a 6mm allen to remove the filter drain plug. It will probably start to spin the filter housing. You can remove the housing by hand or with a regular oil filter wrench. ---------------- There is a step by step guide provided to replace oil filter on mazda 3.I am aware that yours is mazda 6,but still check the step by step guide to replace the oil filter on mazda 3.This will give you more help on replacing the oil filter. Click on the link and go through the guide with diagrams and instructions:---- http://robert.aitchison.org/tiki-page.php?pageName=Mazda3+DIY+Oil+Change --------------------- I hope this will help you.Thanks.Helpmech.

Nov 19, 2010 | 2004 Mazda 6

1 Answer

On a 2008 Mazda CX-7 Where is the Oil filter located and what does it look like?


Unless the CX-7 is different from all other cars I've driven, the filter is a cylindrical painted metal can, about 3 or 4 inches in diameter and 3 to 6 inches long. It can any color, depends on the brand. Go to an auto parts store and ask them for one for your vehicle, and look at it. Different vehicles take different sizes.
It is almost always located on the side of the engine block, between the oil pan on the bottom and the cylinder heads on the top. (You generally have to put the car up on ramps to reach it from the bottom, but I assume you are changing the oil, so you have to get under it to remove the oil drain plug as well.)
When you remove it, be careful for oil that may leak out of it as you are unscrewing it.

Sep 05, 2010 | 2008 Mazda Cx 7

2 Answers

Will 10w30 oil damage your engine in a 2008 Ford Fusion. Dealer says it did. I had two oil changes by a friend and I think he used this oil. In between I also had oil changes done by an oil change company...


it depends on the oil your friend used, fords DONT like castrol or duchams.. you are better using the 5w/15 fords own brand as the hydrolic tappets need almost water like oil... its a ford and mazda thing..

Jan 30, 2010 | 2008 Ford Fusion

2 Answers

How do I change the oil filter on a MAZDA 6 4 CYL..


You don't need a special tool. Use a 6mm allen to remove the filter drain plug. It will probably start to spin the filter housing. You can remove the housing by hand or with a regular oil filter wrench.

Aug 12, 2009 | 2004 Mazda 6

1 Answer

Where is the oil filter on a 2008 ford fusion?


ON 4 CYL IT MAY BE A CARTRIDGE. LOOK FOR
PLASTIC HOUSING WITH END CAP. AUTO ZONE
HAS PARTS. SAME PROCEDURE FOR MAZDA 3.
GOOGLE MAZDA 3 OIL FILTER CHANGE.

Apr 05, 2009 | 2008 Ford Fusion

1 Answer

Wiring digram for 08 mazda 6 radio install


not sure how much the radio or harness changed from 2006 until now, but here is a link to some Mazda radio schematics:
http://www.the12volt.com/installbay/vehiclewiring/1/yeard/Mazda.html

Mar 31, 2009 | 2008 Mazda MAZDA6

4 Answers

Mazda 6 oil change


If DPF means Diesel Particulate Filter, no you don't need to change this cartridge. Somewhere near 120000Km you have to refill the additive tank with Eolys additive.

Sep 05, 2008 | 2005 Mazda 6

Not finding what you are looking for?
2008 Mazda MAZDA6 Logo

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...