Question about 1995 Toyota Camry

1 Answer

When i come to a stop when car is cold it seems to miss fire an dies also will quit in park cold

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,568 Answers

Cold engines require more fuel to run evenly and yours isn't being enriched enough. There are two items which can affect cold operation; cold-start valve and the idle air control. If both are present, one of them probably isn't working as it should.
You might try having your computer scanned at one of the chain auto parts stores if you are in North America. Call to make sure they still do it free of charge.

Posted on Sep 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 Oldsmobile Bravada dies at stoplights, just changed fuel pump/filter and egr valve.Appriciate any help. thanks


check for vacuum leaks. You can do this with a can of carb spray but please be careful as it is flammable! if the ignition wires are leaking and you hit them with carb spray you will start the engine on fire!

The safer alternative is to have the engine "smoked" for vacuum leaks. This is done with a smoker. Any place that is leaking you will see smoke.

A trained ear will also be able to hear a leak.

If no leaks are found try unplugging the MAF sensor. Is is in the air tube next to the air filter box. If performance improves try cleaning it with some MAF sensor cleaner. If that doesn't work than you may need to replace it.

Feb 08, 2012 | Cars & Trucks

1 Answer

There is a check engine light on for miss fires but the car dies not seem to miss fire. The electronic controls for the heat and air appear to work but it can be turned up to 90 and blows ice cold or can...


better look at the blender door. this is a vacuum controled door that allows hot or cold air to flow into the HVAC system and blends the temps together to make the desired temp for you, but if this is electronicly controled you might have a temp sending unit bad or even a control unit bad, as for the miss fire most people wouldn't know a miss fire from a bump in the road anymore. engines anymore if there is a missfire code, there is a missfire, find out what cylinder if missfiring and replace the sparkplug, wire, or coil, you can have the wire loaded to see if its the spark plug or not, and then get the coil tested as well, this will say you money inthe long run since replacing random parts if a waste of money on your part. test it and find the failing part and replace...

Apr 08, 2011 | 1998 Honda Accord

2 Answers

My car will die without keeping constant gas the


it could b the o2senser, or egr valve. i had same problem.dealerwanted 380.00, parts store was 49.50. no wonder dodge is dead .

Feb 12, 2010 | 1996 Dodge Avenger

1 Answer

1990 Mercedes 190e ignition system miss firing after much work


OVP relay, coil and wires usually are the culprit. If not then it gets spendy. EZL is alot and may be an issue. EHA / EGR tube gets clogged also which comes off the exhaust.

Jun 11, 2009 | 1990 Mercedes-Benz 190

1 Answer

Random power loss


CHANGE SPARK PLUGS & WIRES AND AIR FILTER AND SEE WHAT HAPPENS.

Jun 09, 2009 | 1990 Toyota Corolla

2 Answers

I have a 1995 Chevrolet S10 that seems to be missing on take off but once you get going it quits and runs fine until you come to a stop again and then on take off it starts missing again and then levels...


Change the fuel pump. Check first fuel presure.
fuel regulator. PVC valve stuck????
Check the vacum hoses and EGR.
Clean MAF mass air flow sensor.
check the IAC idle air control resistor.
Vitally

Jun 02, 2009 | 1995 Chevrolet S-10 CA Edition

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...