Question about 2007 Kia Sedona LX Minivan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hope not too late to help. I have changed all plugs 2 times now myself. Mine is a 6 cylinder. The rear 3 plugs are impossible to remove without unbolting the intake manifold and other contraptions like the throttle/cruise control cable
and 4 inch air intake tube. If you have engine work experience, great!
If not, color code every disconnect then match up on the reinstall
including plug cables.
Here is where you might not know what to do. First, the gasket (Planum) is a reusable metal gasket. Their is no replacement at Kia (crazy but I asked everywhere in NC) so be sure to tighten each bolt on the intake alternating and to speck amount, a 12 foot socket 1/4 inch wrench is plenty of torque so don't overdo it. I believe 15 lbs of torque is correct but verify. If you like taking risks just tighten using your wrist only (not biceps mustle) as tight as you can using wrist only now! [Rent a torque wrench or buy for $10 - $20 if you don't own one].
Since your doing all this work, change all plug wires and only use Platinum or better plugs that last at least 60k miles of use. You wont be able to change back 3 wires later by the way so buy 3 OEM Kia wires (not the kit) to save money if you want. I mixed plugg types and mine ran just fine!!
Plan on 4 meticulous hours your first time. My 2nd time took 1.5 hrs with a short break.
Posted on Apr 02, 2009
REMOVAL OF THE PLUGS:
Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.
Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.
1. Install spark plug into cylinder head.
Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)
2. Reconnect high-tension leads.
3. Reconnect negative battery cable.
Hope this helps and simple to understand. Good luck
Posted on Apr 21, 2009
First you have to take off the black plastic cover then you will see the 3 on the front of the engine the other 3 are under the manifold, you have to remove the manifold in order to reach them, I suggest you take the car to a mechanic for this work.
Posted on Sep 13, 2008
Tips for a great answer:
May 19, 2016 | 2007 Kia Sedona LX Minivan
Jun 11, 2010 | 2004 Kia Sedona
May 21, 2010 | 2007 Kia Sedona LX Minivan
Apr 06, 2010 | 2002 Kia Sedona
Feb 28, 2010 | 2005 Kia Sedona
Jan 08, 2010 | 2007 Kia Sedona LX Minivan
Jun 13, 2009 | 2007 Kia Sedona LX Minivan
Apr 20, 2009 | 2004 Kia Sedona
Sep 09, 2008 | 2004 Kia Sedona
Apr 27, 2016 | 2007 Kia Sedona LX Minivan
1,821 people viewed this question
Usually answered in minutes!