Question about Chevrolet Blazer
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
More then likely its the Canister Purge Solenoid. you can find it online at www.autozone.com the part number is PV140. And to replace it on blazer you have to remove the spare tire. Alot of people don't know where this part is so I hope this helps you and good luck.
Posted on Oct 14, 2008
SOURCE: my 96 chevy blazer has a code
my 96 blazer would have random missfires.... sometimes more than one cylinder at a time... there are a few things to try.... 96 vortecs still used distributor caps... but they had such a high intensity spark that they were well noted for frying distributor caps and ignition coils... i would start there... also a few times i had to replace the crankshaft timing sensor.... it could be something as small as a spark plug wire... i would start with the ignition before spending money to check the fuel system
Posted on Nov 03, 2009
SOURCE: fault code p0440 CHevy venture
I had that exact code a couple weeks ago. Mine needed new oxygen sensors. They(there are 2, only one was throwing a code, but I had both replaced) cost a little over $100 to have replaced.
Posted on Apr 23, 2010
P0440 - Evaporative Emission (EVAP) System .The most common cause for this code is a loose or bad gas cap.The running issue is unlikely caused by this.Is that the only code present?
Posted on Aug 30, 2010
Hi, P0440 indicates your computer is not getting a drop in fuel tank pressure when opening the evaporation system purge valve. This is not a safety issue, as the gas cap will release any excessive pressure, so you can still drive the car. The problem may be a leak in the evap system or a failed purge valve. Please let me know if you would like some troubleshooting steps or if you have other questions, and thanks for using FixYa.
Posted on Apr 22, 2011
Tips for a great answer:
Nov 04, 2014 | Chevrolet Chevy Cars & Trucks
Apr 18, 2012 | 1996 Pontiac Sunfire
Dec 20, 2011 | 1998 Chevrolet Blazer
Apr 22, 2011 | 1996 Chevrolet Blazer
Jan 20, 2011 | 1996 Chevrolet Blazer
Aug 30, 2010 | 2000 Chevrolet Blazer
Apr 07, 2010 | 2001 Chevrolet Blazer
Jun 30, 2009 | 1996 Chevrolet Blazer
Dec 17, 2008 | 2000 Chevrolet Blazer
Oct 06, 2008 | 1996 Chevrolet Blazer
282 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: