Question about 2004 Kia Optima

Open Question

Replacing rack and pinion - 2004 Kia Optima

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mnabi01
  • 94 Answers

SOURCE: removing and replacing , rack and pinion instalation bolts

no these bolts are notorious for sticking in . heat up the bolt and the subframeand you should be able to tap it out with a punch. good luck

Posted on Jan 28, 2009

  • 3600 Answers

SOURCE: rack and pinion leak

It needs replaced a rebuilt unit cost $350.00 and you need the tools to remove the tie rod ends and you have to unhook the steering wheel, if you have a hoist it's not to bad but a do it yourselfer it's a pretty big job, the fluid is that color because it's sucking air into the fluid because of the leak and the shaking is caused by one side not holding hydrolic pressure because of the leak and wore out inner tierod ends. If you do do it you need a whole lot more information and much more instructions to do it, afterwords it will have to be alingned, having done it before and having the proper air tools I can do one in three hours. You might take a week but it would be a learning experince.

Posted on May 30, 2009

  • 109 Answers

SOURCE: rack & pinion replacement

there many web sites that offer tech suppurt, even Chrysler, just start looking, also Napa Auto Parts. Auto Zone. This is to hard to explain on a site like this. GOOD LUCK RDJRP

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: rack and pinion removal and installation

it is sort of a strange deal but you have to remove the cowl and the wiper assembly and access it through there. You can get the step by step instructions from autozone

Posted on Oct 11, 2009

  • 81 Answers

SOURCE: replacing power steering hose and rack and pinion steering

when it comes to the power steering hose I would say just do it yourself. As for the rack and pinion it will probably cost you quite a few hours of labor. anywhere from 5-9. Its up to you!

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering hose keeps breaking, even when replaced by high pressure hoses. Replacing rack and pinion does not help either.


A bad seal in the rack and pinion would have caused low pressure from fluid by-passing the seal. This also would have caused noticeably increased effort to steer the vehicle. Excessively high pressure would indicate an issue between the power steering pump and the rack, and since the hoses have been replaced I would focus on the pump. PS, find a real mechanic, not a parts changer.

Apr 06, 2014 | 2001 Chrysler Town & Country

1 Answer

Rack & pinion steering replacement


DISCONNECT TIE RODS ENDS FROM WHEEL HUB, DISCONNECT POWER STEERING HOSE FROM RACK AND PINION, DISCONNECT RACK AND PINION FRON LOWER ENGINE COMPARTMENT

Feb 19, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

How to remove rack and pinion from 99 chrysler lhs


There are few help links showing exact accurate procedure to replace Rack and Pinion. Click the link below and follow the procedure:-----
Pinion Seal Replace on Dodge Dakota? http://howtobyme.blogspot.in/2012/04/pinion-seal-replace-on-dodge-dakota.html

-----------

How to Replace a Rear Pinion Seal.
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-rear-pinion-seal.html
------------

How to replace Power steering rack and pinion gear on Chevy Silverado 2500 HD? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-rack-and.html

----------
How to replace Power Rack and Pinion Steering Gear on Acura Car Models? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-rack-and-pinion.html

-----------
How to replace power rack and pinion steering gear on Toyota cruiser? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-power-rack-and-pinion.html

----------


How to replace Power Rack and Pinion Steering Gear on Acura Car Models? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-rack-and-pinion.html


------------
Front Drive Pinion Seal Removal on Ford Explorer? http://repairhelpcenter.blogspot.in/2012/03/front-drive-pinion-seal-removal-on-ford.html

-------------
How to Replace Driveshaft, Pinion Flange & Seal?

http://repairhelpcenter.blogspot.in/2012/03/how-to-replace-driveshaft-pinion-flange.html

------------


How to Replace Power Rack & Pinion Steering Gear On 2007 Ford Taurus? http://repairhelpcenter.blogspot.in/2012/03/how-to-replace-power-rack-pinion.html


----------
How to Remove Power Rack & Pinion Steering Gear on Ford Windstar? http://repairhelpcenter.blogspot.in/2012/03/how-to-remove-power-rack-pinion.html

-----------

Power Rack & Pinion Steering Gear replacing details for Buick Park Avenue and Pontiac Bonneville

http://repairhelpcenter.blogspot.in/2012/03/power-rack-pinion-steering-gear.html

-------------


How to Replace Power Rack & Pinion Steering Gear on Mercedes Benz Truck? http://howtobyme.blogspot.in/2012/03/how-to-replace-power-rack-pinion.html


---------
How to replace Power Rack & Pinion Steering Gear on Toyota 4Runner? http://howtobyme.blogspot.in/2012/03/how-to-replace-power-rack-pinion_27.html

-----------

Power Rack & Pinion Steering Gear Replacing on Toyota Land Cruiser & Sequoia? http://schematicsdiagram.blogspot.in/2012/03/power-rack-pinion-steering-gear.html

----------
Power Rack & Pinion Steering Gear Removal on Toyota RAV4? http://repairhelpcenter.blogspot.in/2012/03/power-rack-pinion-steering-gear-removal.html

----------
How to Replace Power Rack & Pinion Steering Gear on Toyota Sienna? http://technoanswers.blogspot.in/2012/03/how-to-replace-power-rack-pinion.html

------------
These details will help.
Thanks.



Nov 23, 2012 | Cars & Trucks

1 Answer

Rack and pinion? have play in wheel no sign of leaks new power steering pump installed


Hi Gunny, If your vehicle is fitted with rack and pinion steering also check the rack ends for play. The rack ends are the rods which the tie rod ends screw onto. The other end fits onto the rack of the rack and pinion. To work on those you will need to remove the rubber boots and loosen the locking washer, they can then be loosened with a wrench. If they are worn the play will be evident in the steering. When replacing them also replace the rubber boots. If the boots are worn and road grime and dust enters, you will see leakage from the rack and pinion in the near future. I always thought the Dakota was fitted with a steering box? Regards John

Jun 24, 2012 | 1990 Dodge Dakota

1 Answer

My 2003 ford focus lost it's power steering, mechanic replaced the rack and pinion thing - lost steering again and now the mechanic says it is the power steering pump. The rack and pinion was replaced...


if the rack and pinion was not leaking or causing problems. then he may of made a wrong move! if the rack was fine before, and you just lost power steering. then it is most likely the power steering pump or the lines that go from rack to the pump. good-day ! if a rack goes bad, you will get a bad steering problem or just bad steering.

Aug 23, 2011 | 2001 Ford Focus

1 Answer

Looking for rack & pinion cost of replacement on


A good shop can replace the Rack & Pinion for $400 to $500 and should include the required front-end alignment. Are you sure it's not one of the hoses.

Aug 22, 2011 | Ford Taurus X Cars & Trucks

3 Answers

I went to drive my car to work this morning and lost the power steering feels like it locked up the leak of power steering fluidf is leaking from the rack and pinion not pump


Hi and welcome to FixYa!

If that's the case then the oil seals of the rack and pinion should be replaced. If the seals are worn out it tends to leak and can definitely feel a loss of power. If it still leaks even after the replacement then the rack and pinion should be replaced.

There are instances that after oil seal replacement it still leaks it's because that the rack and pinion has severe damage.

Hope this helps and thank you for using FixYa! Have a good one!

Jan 24, 2011 | 1997 Dodge Intrepid

1 Answer

95 Olds Achieva steering just ceased up tonight with no warning. Could it be that it is low in fluid?


If it is hard to turn it could be the fluid is low. If you can't turn the steering wheel go underneath the lower rack and pinion right were the steering shaft bolts to the rack and pinion there should be a round silver cap looks like a plug if that cap is missing the pinion bearings are broken and the rack and pinion are locked up replace your rack and pinion

Jun 18, 2009 | Jaguar S-Type Cars & Trucks

Not finding what you are looking for?
2004 Kia Optima Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...