Question about 1994 Toyota Camry

2 Answers

My daughter rear ended a vehicle in her 94 Camry, it pushed the hood, grill, and lights back, the hood is tented in the center, it's running fine, the front bumper and fenders are ok too, is it possible to just remove these parts and replace them with used?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 192 Answers

Sure. Don't hesitate to look for other damage when you pull those parts off. The hardest part will be lining everything up when installing the new parts. Since the hood was dented, I would check to make sure the hood latch is still good when you do the work. You don't want that part failing while doing 60 down the interstate

Posted on Sep 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 114 Answers

Yes it is, check with an auto salvage yard, have someone look to see if the rad support or headlight mounts got damaged

Posted on Sep 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Humming after engine shuts off


I'm no Honda expert so I'm not sure if an 02 has a "key off" evap system. If it does that may be what you're hearing. A lot of newer cars will run evap tests while the vehicle is off. It basically pulls vacuum on the fuel tank with an electric motor to test the integrity of the evaporative emissions system and opens / closes vacuum switching valves.

Sep 18, 2013 | Honda Cars & Trucks

1 Answer

I have an 94 Toyota Camry and I can't get rear drum back onto the vehicle. What is the problem?


I am assuming you changed the brake shoes? The adjustment must be backed off right as far as it will go, and then turned the other way when the drum is on. See here p37 on...

http://www.turboninjas.com/camry/br.pdf


If the shoes were not changed then they have been pushed askew a little bit, that's all. Try backing off the adjustment as if they were new ones.

Sep 18, 2012 | 1997 Toyota Camry

1 Answer

How do you take the grille off of a 1996 isuzu trooper 2




Trooper
See Figures 3, 4 and 5


a06490f.jpg
Fig. 3: Front grille assembly-1984-94 Trooper


e8688ea.jpg
Fig. 4: Front grille assembly-1995-96 Trooper


57fd329.jpg
Fig. 5: Retainer clip used to secure the front grille
  1. Raise the hood and support it with the prop rod.
  2. On 1981-94 models, remove the retainer screws from around each headlight.
  3. Remove the retainer screws from the corners and center of the grille.
  4. Using a small prytool to press the tab on each of the grille retainer clips at the top of the grille upward while pulling the grille away from the radiator support.
  5. When all the tabs have been released, lift the grille up slightly and out to remove.
To install:
  1. Engage the lower portion of the grille into the radiator support.
  2. Carefully push the grille toward the radiator support, making sure the retainer clips align with their respective mounting hole. Once all the holes align, press the grille and retainer in until it clicks into position.
  3. Install the retainer screws from the corners and center of the grille.
  4. On 1981-94 models, install the retainer screws around the headlight.

Hope helps (remember rated this).

Jul 09, 2010 | 1996 Isuzu Trooper

1 Answer

Need to know how to unlatch hood from under car as the hood cable busted


Get strong flashlight & extended reach (long) screwdriver. Looking through grill in center of hood but towards driver side,locate hood release cable. You will see the exposed wire end coming out of the casing. Follow to hood release. With screwdriver pry it towards driver side should release first latch so you can open hood.

Jun 14, 2010 | 1998 Toyota Camry

1 Answer

Replace rear speaker grills on 2004 Toyota Camry


To remove that whole lid you need to remove the rear seat. the bottom half just pulls up and out and the back side pieces have two bolts down low, one on each side, then you can remove the rear seat back and that lid should be held in place with either bolts or push pins. The lid should come out and give you access to replace the speaker grills.

Mar 17, 2010 | 2004 Toyota Camry

1 Answer

Can't open 94 Suburban hood. Latch is no longer working. How can I open the hood without using the latch.


you can open it with a long thin screwdriver. Look thru the center top of the grill. You should be able to see the cable running to the latch. Follow the cable to the end and you should be able to get in there with the screw driver and fish around to get it to unlatch. After you get it open you can tie a piece of wire to the latch sticking out of the grill to pull on and release it till you can get it repaired. Most likely the cable or pull handle is broken

Dec 10, 2009 | 1994 Chevrolet K1500

2 Answers

Just bought my 94 jeep cherokee & the screen in the middle consol continues me beep and flash ''rear lamp failure''


the driver information center(DIC) is telling you one or more of your rear light bulbs has failed. it could be a tail light,stop light,center high mount stop light,turn signal or license plate light. have someone in the vehicle turn the lights on and hit the brakes and turn signals so you can see which one is burned out.

Nov 06, 2009 | 1994 Jeep Grand Cherokee

1 Answer

94 Camry was running fine, suddenly became sluggish


How did you try to obtain the codes? Did you short pins E1 and Te1 in the grey connector under the hood?

When the light comes back on, short the above pins, and get back to us.

Without seeing the codes, I would venbture a guess that you first consider a good tune-up, and use Toyota plugs only. Any other manufacturer will not work very well. I see this every day, new plugs, and the engine runs poor. Toyota plugs fixes it right up. The heat ranges are diffferent in Toyota plugs.

Nov 03, 2009 | 1994 Toyota Camry

1 Answer

Wat tools use to change head light bulb in a chevy equinox


You will need basic hand tools.

Headlamp Bulb: Service and Repair
HEADLAMP BULB REPLACEMENT (EQUINOX)
REMOVAL PROCEDURE
1. Open the hood.
90a07c3.jpg 2. Remove the fascia to tie bar push-in retainers (1).
888ce48.jpg 3. Gently pull the top of the fascia assembly several inches away from the vehicle to release the radiator grille strap from the headlamp.
4. Place a piece of tape over the radiator grille strap to headlamp retaining clip to prevent scratching of the headlamp lens.
25ee555.jpg 5. Remove the headlamp bolts (1, 2).
054ce4f.jpg 6. Pull gently on the bottom outboard corner of the headlamp to disengage the lower rear headlamp retainer.
7. Remove the headlamp from the vehicle.
INSTALLATION PROCEDURE
985fba5.jpg
1. Position the headlamp into the headlamp opening.
e3187c6.jpg 2. Push the headlamp back into position until the lower rear retainer is fully engaged.
e5916af.jpg 3. NOTE: Refer to Fastener Notice.
Install the headlamp bolts (1, 2)
Tighten the headlamp bolts to 2.5 N.m (22 lb in).
4. Remove the tape from the radiator grille strap retainer.
efd9aad.jpg 5. Position the fascia assembly and engage the radiator grille strap retainer into the headlamp.
5a4fd4a.jpg 6. Install the fascia to tie bar push-in retainers (1).
7. Close the hood.
8. Check and adjust the front headlamp aim after the headlamp has been reinstalled. Refer to Headlamp Aiming.

Oct 04, 2009 | 2007 Chevrolet Equinox LS New Cars

2 Answers

Head light cover


Step1Your first stop should be to your local auto parts shop to get the bulbs you need. You'll need to pick up #9006 bulb, this one has a gray bas and is used for replacing the outside high beam. If you are looking to replace your inner low beams you'll need to pick up #9005 which has a black base. The bulbs should run you about $16.00 USD. Step2Alright once you have your bulb and are ready to replace it make sure you have popped the hood the release lever is on the inside of your vehicle. Step3While facing your car with the hood open, your going to remove the grill by pushing down on the two retainer clips which are on the top of the grill. You'll need a flathead screwdriver to help you with the rest of the retainer clips. There are two on the bottom ends of your grill one in the center and 2 on each side. Now you'll just pull up on the grill and it should come out easily. Step4On each side of the headlamp you should see a One inch long tab, when you pull up on the tabs it will release the headlamp so that you may pull the headlamp toward you. Pull the head lamp out. Step5There will be two round rubber caps at the rear of the headlamp. Remove the caps and then pull out the wire harness from the bulb.
Replace the bulb or bulbs and remember that #9006 has the gray base and is for the high beam and #9005 is for the low beam and has the black base. Reconnect the wire harness and replace everything to its original position and now you have a fixed headlamp! Congratulations!

Aug 01, 2008 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
1994 Toyota Camry Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...