Question about 2006 Lexus Gs 300

1 Answer

I need to replace the drivers side headlight but figure I should do both. How do I do it?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 192 Answers

On newer cars, the bulb is seperate from the housing of the light. On the back of the housing there's wires running into it. The bulb should be a twist lock style. You should be able to turn the bulb and it will pop out. Plug the new bulb into the wiring and twist it back in. It may have clips holding it in instead. Hope this helps

Posted on Sep 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replaced headlight bulb now truck won't start.

It had all the symptoms of a low battery. Glad you got it figured out!

Feb 25, 2012 | 2001 Lincoln Navigator

1 Answer

Replace low beam drivers side headlight on 1993 olds cutlass supreme convertible

Remove turn signal assembly (uses a torx 15 driver). This will expose the two 10mm bolts on the one side of the headlight assembly. Remove the plastic front grill (uses a torx 15 driver - there are about 6 screws). This will expose the other two 10mm bolts on the headlight assembly. Remove the four 10mm bolts to remove the headlight assembly and this will allow you access to the headlight you need to replace.

Feb 18, 2011 | 1993 Oldsmobile Cutlass Supreme

1 Answer

The headlight beam on my left side shines too low. My mechanic replaced it and can't figure out how to adjust it up to the same level it was before he replaced it. If I shine the lights on a wall, the...

First check bulb is inserted and clipped in correctly most are awkward.did the inner part get disturbed etc.i dont know if ur model has auto adjust headlights but even if it does and the motors failed they can still be done manually.most have two nut shaped adjusters or take hex type key .i think u should check the stuff i started with.they dont just go out of adjustment without a cause

Apr 17, 2017 | 2007 Subaru Impreza WRX Sport Wagon

1 Answer

Remove driver side headlight assembly

It's easy no tools required.
There are 2 inserts behind the head light, just pull them straight up and the headlight will come out. I recomend you use masking tape on the top bumper to prevent scratches when removing.

Mar 25, 2010 | 2001 Ford Mustang

1 Answer

Driver side headlight is out. How do i fix?

change the bulb jus look at the light housing it shouldnt be hard to figure out how to remove it to get to the bulb should jus be a couple of screws

Oct 13, 2009 | 1998 Chrysler Cirrus

1 Answer

Remove driver side headlight assy to replace side marker light

There are two screws holding the headlight in. The screws are just above the headlight. After removing the screws you'll need to carefully pull straight out on the headlight assembly. There's a ball/socket type joint just behind the headlight. This joint needs separated for the assembly to come all the way ouit. Reaching and replacing the side light bulb requires a bit of arm twisting.
Reverse the order to re-install the headlight.

Sep 26, 2009 | 2002 Buick LeSabre

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement? I have the same problem, low beam, driver's side headlight is out but I can't figure out how to get the bulb out to...

The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

May 06, 2009 | 2004 Lexus ES 330

1 Answer

99 olds culass headlight bulb replacement

Look at the top of the headlight assembly. There is a plastic panel on top of the assembly that is held in place by two plastic pins. Remove those pins by lifting the center of the pin and then pull out the pin. Remove the panel. Then you will find two small plastic levers that will lift about 1/2 inch. They do not come out but they will release two studs that secure the assembly. After the assembly is released, slide it forward to access the bulbs you need to replace. Installation is the reverse of these procedures.

Feb 25, 2009 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts


Level 3 Expert

76846 Answers


Level 3 Expert

907 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides