Question about GMC C1500

Open Question

1993 GMC Sierra C-1500 Automatic shifts hard 1 to 2 gear only .

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 137 Answers

SOURCE: Emergency brake actuator for 2001 GMC Sierra 1500

they used those on the full sized trucks and suv's so you might want to try a salvage yard..

Posted on Jan 22, 2009

Ad
emissionwiz
  • 76846 Answers

SOURCE: 1993 GMC 1500 4x4 poor shifting

this may be due to a poor connection at the vehicle speed sensor on the transmission, pull the connector off the sensor and clean it with contact cleaner, if the problem persists replace the speed sensor. there are 2 diff ones here is a picture of the most common one for an auto trans.3deea43.jpg

Posted on Mar 26, 2009

  • 135 Answers

SOURCE: hard shift manual transmission

check the fluid in the slave cyclinder,it looks like a brake fluid tank, you need to use brake fluid in it also, look to see if you have one for brakes and one for the clutch, fill it up to full line ,hope to help

Posted on Jul 19, 2009

  • 16 Answers

SOURCE: 1998 gmc sierra 1500... it is an automatic and I

You have a faulty speed sensor. It is located it at the rear left of the transmission. If it is a four wheel drive, it is located at the tailshaft of the transfercase.

Posted on Jul 27, 2009

fixitriteman
  • 431 Answers

SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED

have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds

Posted on Mar 11, 2010

Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix automatic transmition in 2002 GMC ENVOY 4x4 shifts hard into third will not shift into overdrive already replaced the two solenoids in front before it would not shift to third


How To Rebuild A 4L60E Automatic Transmission - YouTube

? 13:19
https://www.youtube.com/watch?v=JpmJtuVrdWk
Mar 16, 2011 - Uploaded by Nick Stageberg
How To Rebuild A 4L60E Automatic Transmission ... Also here is a link to some common break/fixes that may require a rebuild:... GMC canyon, envoy, safari savana, sierra Sonoma, Yukon, ....Great video, my 96 sierra 4x4 when shifting into high gear motor races as if nothing is there........................always ...

30 Common 4L60E Transmission Problems & Repair ...

www.twincharlotte.com/transmission-repair.../30-Common-4L60E-Trans...
Mar 18, 2011 - The 4L60-E is an automatic shift, four-speed overdrive, longitudinally...... 4l60e 2002 gmc 4x4 was not driven for 1 year,will not shift into 3rd or ... I have a 2005 GMC envoy 4x4 6 Cylinder I assume it is a 460LE Transmission.

Nov 24, 2015 | GMC Cars & Trucks

1 Answer

1993 gmc 1500 4x4 only shift into 4wheel when stopped


automatic hubs?? if so chances are they put grease into automatic hubs, which will cause sticking. hard apply, hard release..

Jan 27, 2013 | 1993 GMC Sierra K1500

1 Answer

I have a 1993 GMC Sonoma that shifts hard from 1st to 2nd gear but good in all others and when u put it in gear i goes in gear kinda hard it is an automatic with 120000 mi


my friend you are having valve body problems, the 1-2 shift acumulator valve is probably stuck, you have to service the valve body or replace it

Dec 17, 2009 | 1993 GMC Sonoma Club

1 Answer

GMC 1500 Auto, will not shift back into park?


Climb under your pickup and look where the cable connects to the side of the transmission and make sure there is not any mud around the cable or around the shift linkage hookup. If so clean it off and see if it will shift. We have found many of these with mud caked around the shift linkage or a lot of ice buildup and wont allow it to shift into park.

Dec 10, 2009 | 2000 GMC New Sierra 1500

1 Answer

Shifting problems on an 85 gmc auto trans


transmission is shot clutches are worn out

Oct 14, 2009 | 2000 GMC New Sierra 1500

1 Answer

2003 Started reving high in 2nd when trying to shift to 3rd gear. Its an automatic transmission. No problems before this. No Slipping, No Hard Shifting.


Check the fluid while the engine is on in park..
If fluid is not low - it could be a vacume or modulator issue.. (the modular tells the trani when to shift via vacume presure)
Some shops give free estimates.

Jul 08, 2009 | 2003 GMC Sierra 1500

1 Answer

1993 GMC 1500 4x4 poor shifting


this may be due to a poor connection at the vehicle speed sensor on the transmission, pull the connector off the sensor and clean it with contact cleaner, if the problem persists replace the speed sensor. there are 2 diff ones here is a picture of the most common one for an auto trans.3deea43.jpg

Mar 26, 2009 | 1993 GMC Sierra K1500

1 Answer

Automatic transmission


When you say punch I am assuming its a hard shift.Is your idle higher than usual ? Lower the idle down if you can if that will make it change gears easier. The transmission should be looked at for wear in the bands. Please rate this !!!

Sep 12, 2008 | 2002 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...