Question about 2006 Hyundai Santa Fe

Open Question

Gearshift console light for gears is out. How take apart console to replace light ALSO: icon light out for drivers side heated seat. but on button make little light go on?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Toyota Camry XLE and the heated seat on the driver side stopped working. I had the fuse labeled for the heated seat (which I believe was 20a) and it was blown. The buttons for the heated...


Replace the fuse with one the same rating. If the seat now works.... smile. If the new fuse blows or the heat does not work you may have a short (or a broken wire) inside the seat that's causing the problem. It's an 11 year old seat.... tearing it apart to find the source may not be worth it.

Jan 08, 2015 | 2004 Toyota Camry

1 Answer

Change gear knob


This is an "it depends" answer. It depends on the type of gearshift knob and its installation. If your vehicle is equipped with a manual shift and the shift lever is little more than a steel rod sticking up from the console, then it is easy to replace.

To replace it, simply do this:

1. Set the parking brake
2. Take the car out of gear
3. Center the gearshift
4. Place a piece of cloth around the gearshift knob to prevent damage
5. Place a ViceGrip (R) or pair of pliers around the cloth on the gearshift knob and gently begin turning the knob to the left
6. Spin the knob off the shaft

Remember, though, this works only if the gearshift knob does not have another function combined. For example, you might find a reverse gear actuator on the top of the gearshift knob or you might find a reverse actuator button on the front face of the gearshift knob. This type of combined function gearshift knob is usually found on automatic transmissions.

If you want to remove the gearshift knob from this type of shift, see the service manual and obtain the tools you will need as this type of gearshift knob is much more complex to remove and involves many different systems that have to be addressed before the knob will come off.

It is better to leave this type of fix to trained technicians.

If you need further information or if you would like to see information on automotive safety please visit this site: Safecar infoCar safety Insurance Magazine

Nov 12, 2014 | Cars & Trucks

2 Answers

2013 Toyota Avalon


I suspect that the insulator that seals the selector lever to the floor and the lever inside the car is allowing engine heat ,road heat to enter the cab past the gear lever. IT is common problem if the insulator rots or is not replaced after gear box removal say for clutch replacement.

May 12, 2014 | 2013 Toyota Avalon

1 Answer

2005 Impala gear shift button popped out. I have to put it back in each time I need to shift to D, R, etc. How can I remedy this problem without replacing the whole gearshift?


Re-attaching the knob to the gearshift is the key...Look for a hole on the lower section of the knob...if you cannot see it...remove the bottom chrome piece from the knob, (pry apart carefully not to scratch the chrome housing...you should see the small hole normally includes a small allen insert screw or Phillips screw...must be screwed in to the gear shift shaft to hold in place...if you cannot compare...visit a local salvage yard to experiment..."Pic A Part" is a national self help salvage yard. Hope this helps. If the button does not stay in the gear shift knob...you can replace the knob (with button) only...remove the knob as described above. Hope this helps.

Oct 14, 2013 | 2006 Chevrolet Cobalt

1 Answer

Seat Heaters Navigator


Use a cheap meter to see if you are getting power to the connector under the seat if you are replace seat heaters you can get them cheap on the net

Dec 03, 2011 | 1999 Lincoln Navigator

1 Answer

I have a 1994 Pontiac Grand Prix. I am having trouble getting the car out of park and into gear. There is a center console gear shift lever. Sometimes I can get it in gear. Sometimes I can't. There is...


renew the brake light switch and try that ,because that switch stops you from moving the gearshift its your safety device ,if that doesnt then change the solonoid under the gearshift lever

Dec 24, 2009 | 1994 Pontiac Grand Prix

1 Answer

How to put the top down on a 2005 6series BMW?


2 buttons right in the middle of the center console just forward of the gear shifter between the L&R heated seat buttons. one button will put the top down, one will raise it.

Jan 27, 2009 | 2001 BMW 325

1 Answer

Drivers heated seat won' work


Probably a fuse!
Under the dash on the drivers side or under the hood.
New cars have them labeled right at the fuses not in the manual!
Hope this is helpful.

Good Luck!

Jan 05, 2009 | 2004 Buick LeSabre

1 Answer

The heated seats don't heat, both driver and passenger side.


your heater element in the seat went bad,the dealer will have to do this because the seat has come apart the cover wether it is leather or cloth.

Dec 19, 2008 | 2004 Chrysler Sebring

2 Answers

Heated driver seat doesn't heat on 2003 ford explorer


this is a common problem if you use the seat heater alot.one or both of the seat heater elements will have burned up or broken.where i live it is very cold most of the time and i have replaced hundreds of the seat heater elements.it is rare for it not to be one or both of the elements.

Nov 14, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
2006 Hyundai Santa Fe Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...