Question about 2004 Honda Odyssey

Open Question

My 2004 honda odyssey sliding door will not lock

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Honda Odyssey doors

I read about this issue while I was looking for a fix to mine. Try the following:

Remove fuse #13 for 30 seconds or more from the passenger side fusebox. This will reset the door and the clock.

OR

1.) Disable the power door switch on the left dashboard.
2.) Remove the power door fuses located under the front passenger leg area.
3.) Manually open and close both sliding doors.
4.) Restore the power door fuses located under the front passenger leg area.
5.) Enable the power door switch on the left dashboard.
6.) Try opening the sliding doors.


http://www.topix.com/forum/autos/honda-odyssey/TD1QRDMAQ28J8EDA0

Posted on Sep 03, 2008

  • 496 Answers

SOURCE: Sliding power doors will not open

Make sure the power door master switch is on.
Check fuses no. 9 (10A) driver's under dash fuse box and
no.'s 1 (20A), 5 (20A), 13 (7.5A) in pax side kick fuse box
no. 81 (both 30A) in under hood fuse box.

-T





Posted on Jan 20, 2009

  • 496 Answers

SOURCE: 2002 Honda Odyssey

The tracks may be clean but the rollers can get damaged. I found one door with a roller entirely missing. There are several rollers on each of three brackets; top, middle, and lower. For example, the middle bracket has two rollers which rotate axially in the horizontal direction to track the side of the rail---and a vertical roller to carry the weight of the door on the bottom of the track. If any of these rollers becomes chipped, cracked or simply are missing, you will get grinding noises and bucking problems. Use a strong flashlight and check ALL of the rollers for damage.

Posted on Jan 21, 2009

  • 1 Answer

SOURCE: Door will not slide automatically; emits loud beeping noise

Something similar to that was happening with our Odyssey...the beeping when you are driving whether it's ongoing or intermittent is the "safety alarm" letting you know the door is not closed. The power lock is not engaging. What I do when I get the beeping while driving is hit the Door Close button. It causes the door to attempt to engage again. To fix it...we first cleaned out the space below the side running board (kids were hiding crayons and things in there), then looked for any obstructions along the top and bottom tracks. I sprayed a lubricant along the tracks (I'd suggest the dry lube kind...I used WD40 the 1st time and had streaks of it dripping down after driving), use a lube that has a long straw to spray in small places...and spray up into the track that runs the length of the middle of the car. Manually open and shut it a few times to get the tracks lubed, then try it out.
If you press the open OR close button by remote or in the car and get nothing...no movement/no noises/no beeping...then it could be the electrical circuit itself, the signal itself may be impeded...or the motor shot. Have you tried any of these suggestions before?

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: 2002 honda odyssey power sliding door roller

Not very difficult if like my '99. Be sure to purchase the correct hinge for "power" door. Here are the steps:

  • Remove rear tail light (2 screws and pull from socket)
  • Remove two screws from rear of hinge cover panel
  • Remove bolt from front of hinge cover panel
  • Open door around one foot and rest the back end on something about the same height
  • Remove the three bolts from the hinge connecting it to the door
  • Loosen slack on cable by unbolting pulley under inside rear panel (tire tool storage on driver side)
  • Slide broken hinge out back of rail
  • Replace new hinge and put all back together
I don't know if there is a simpler way to loosen the slack on the cable, but this is how I did mine.
Hope this helps.

Posted on Aug 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Honda Odyssey driver's side manual sliding door won't open/unlock - I hear the lock mechanism moving when I activate the power lock/unlock, but the door cannot be opened no matter what i...


More than likely the connecting rod that goes from the door lock actuator to the locking mechanism itself came unattached. These rods are usually held in place by a small piece of plastic that the rods "pop" in and out. The only other thing i can imagine possible is that the door lock itself is actually seized up. In order to attempt to fix this, you would have to remove the door side panel to see the inner workings of the door, and this is quite difficult on most side sliding doors (i have a 2000 pontiac montana w/dual sliding doors). Hope this can help you solve your problem.

Oct 24, 2011 | 2005 Honda Odyssey

1 Answer

The driver's door lock on my 2004 Honda Odyssey does not respond to the key fob or door lock switch anymore. All other lock actuators and switches work properly. I thought it was the actuator in just...


Has Honda had a look at it? Beside the engine control module
I believe there is a body control module with relays, etc for
functions like door locks, windows, wipers, so it can get
complicated. Best bet is let Honda deal with it.

Jan 30, 2011 | 2004 Honda Odyssey

4 Answers

2005 Honda Odyssey EX power sliding door latching issue


My van Started doing this exact same thing today same year, model, have you found a solution yet?

Jan 11, 2010 | 2005 Honda Odyssey

1 Answer

2003 Honda Odyssey - Passanger side sliding door won't lock.


Try to disconnect the battery for about 30 minutes this should reset the computer for you.

Jul 19, 2009 | 2002 Honda Odyssey

1 Answer

Seems like doors bang against open stops


is this when it's opened and slidding back ?
if so there is form tape you can buy and cut off a pice and place at the back of the rollers were they stop.

May 30, 2009 | 2004 Honda Odyssey

1 Answer

2003 Honda Odyssey Passenger Sliding Door Lock


I had problem with the door not opening from the inside because my kids put the child latch on.

Sep 05, 2008 | 2003 Honda Odyssey

2 Answers

Honda Odyssey doors


I read about this issue while I was looking for a fix to mine. Try the following:

Remove fuse #13 for 30 seconds or more from the passenger side fusebox. This will reset the door and the clock.

OR

1.) Disable the power door switch on the left dashboard.
2.) Remove the power door fuses located under the front passenger leg area.
3.) Manually open and close both sliding doors.
4.) Restore the power door fuses located under the front passenger leg area.
5.) Enable the power door switch on the left dashboard.
6.) Try opening the sliding doors.


http://www.topix.com/forum/autos/honda-odyssey/TD1QRDMAQ28J8EDA0

Sep 03, 2008 | 2002 Honda Odyssey

Not finding what you are looking for?
2004 Honda Odyssey Logo

Related Topics:

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...