Question about 1994 Honda Accord

1 Answer

Dashboard are quiet noisy - 1994 Honda Accord

Posted by on

  • johnny mcneely Sep 07, 2010

    squeaky? or grinding? only squeaks when going over bumps? look for loose screws at dashboard area.if it is cracking and popping, you have loose screws on dash board. screws wont tighten? try putting small pieces of card board in cracks of dashboard where the squeking and poppingcomes from. hope this helps!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Assuming you bought this used then we can assume someone had the dash out to replace the heater core and didn't tighten stuff down

otherwise, suspect a defective bleed door motor and use your ears to pinpoint the noise

tough to do on-line

Posted on Sep 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08 Civic EX, valves became noisy at60K, valves quiet after warmup. They will probably still be noisy after I adjust them. Would the cause be excessive wear on the valves stem ends and rockers?


If there were no wear, the valves wouldn't need adjusting. The reason for periodically adjusting the valves is to compensate for the wear that the valve train undergoes over the life of the engine. Be optimistic! Have confidence that adjusting the valves will reduce the noisy valves.

Apr 10, 2017 | Cars & Trucks

1 Answer

My 09 Subaru forester starts out very noisy but quiets down after the engine has warmed up


if it's not mechanical noise check your exhaust sheilds for loosness.

Jan 05, 2016 | Subaru Cars & Trucks

1 Answer

Do they wor for noisey tappets


Noisy lifters (tappets) are caused by wear in the valve train, this is a fact of life for engines and normal. Two choices, go to the next higher viscosity oil(which will only quiet it a little), or have the valve train rebuilt. I personally have seen noisy engines run 10-15 years with no major failures!

Mar 18, 2015 | Cars & Trucks

2 Answers

Noisy valves 5.2 engine


How noisy are they, are they noisy when you start the engine and then quiet down, do they get louded as you go faster? Noisy valves could be normal as Chrysler engines do have a clicking sound on these big engines. It is a hemi by the way.

Mar 02, 2011 | 1995 Jeep Grand Cherokee

1 Answer

I have a 2004 Toyota Tacoma. During the last 2 months when I start the truck in the morning I hear a "tac, tac, tac, tac ...." noise for 30s to 1 min than it stops when I drive away. This...


This is most likely a noisy lifter (or valve tappet). In cold weather, the clearances in the valve train open up because metal contracts due to the cold. Once the oil pressure comes up after start the noise goes away because the larger clearance fills with oil and the lifter becomes "cushioned" with the oil. The proper fix is to have the valves adjusted. I believe in your model, that is done by putting shims on the lifters. This will quiet the noisy lifters. In the short term, you can try using a lighter weight oil for cold weather. This will get the oil to the lifters faster after start up and quiet the tapping more quickly. Once the weather warms again, shift back to the normal weight.

Jan 09, 2011 | 2004 Toyota Tacoma

1 Answer

Why are the lifters of my pajero io noisy


those engines are known for lifters draining in order to restore them you must run the engine rpm about 2000 rpm for 5 minutes .they shoudld quiet down mitsubishi says to run them at 4000 rpm for 10 min,but i rebuild *** engines for 20+ years i dont recomend this with out causing damage to eng just hold the rpm to 2000 until the get quiet make sure you have fresh oil and the engine as good oil press

Aug 28, 2010 | 2000 Mitsubishi Eclipse

2 Answers

Moan noise in steering column


all the 3.6 liter engine,outlook, aura, vue anything with a 3.6 liter engine has noisy steering,there is no fix,,,just noisy

Jun 03, 2009 | 2007 Saturn Outlook

Not finding what you are looking for?
1994 Honda Accord Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...