At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
that part is called the bumper guard its made of pvc plastic its rated at a crash rating of 5 mph front end collision its not the actual bumper the bumper is what its bolted to and thats made of a piece of 1/4'' plate steel.
start removing the grill and bolts holding the bumper in the side of the grille or holding the grille then loosen the fender liner were it meets the bumper and at the top edge of the bumper were it meets the fender they have a 10mm. bolt holding the bumper and voila bumper is off really easy....
It is not necessary to remove the entire grill, just the chrome trim piece that extends across both head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim piece. Be VERY careful in doing this as the chrome piece is very brittle & easily broken or damaged. Once you have the trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. After removing the 3 bolts, pull the headlight forward to dislodge the lower retaining tab which is on the opposite side of the headlight housing from the lower bolt toward the rear of the housing. Once you have the assembly out, accessing the bulb is simple!
This is not the easiest job to do, so it is a good idea to take painter's tape & protect the paint on the bumper & fender as well as the clear, Lexan part of the headlight assembly. Take your time, be careful, & you will get it right the first time!
There are only 3 bolts and a few tabs. Here's how to remove it.t is not necessary to remove the entire grill, just the chrome trim
piece that extends across both head lights. Use a small flat
screwdriver and delicately pry the trim piece towards you. It is held
in place by several small plastic tabs that are located across the
entire back side of the trim piece. Be VERY careful in doing this as
the chrome piece is very brittle & easily broken or damaged. Once
you have the trim removed, you will need to remove 3 bolts that retain
the headlight assembly and one press-in tab. The bolts have 10mm heads.
Two are located on the top of the assembly, one on the lower corner.
After removing the 3 bolts, pull the headlight forward to dislodge the
lower retaining tab which is on the opposite side of the headlight
housing from the lower bolt toward the rear of the housing. Once you
have the assembly out, accessing the bulb is simple! This is not
the easiest job to do, so it is a good idea to take painter's tape
& protect the paint on the bumper & fender as well as the
clear, Lexan part of the headlight assembly. Take your time, be careful, & you will get it right the first time!
This website www.reliable-store.com has the largest collection of repair, service, parts manuals
of any vehicle on earth. Best website I came across for manuals.. Very helpful website
×