Question about 1998 Mercury Mystique

Open Question

Drivers seat removal/ re-installation of 1998 mercury mystique gs model

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: How do I remove and replace front wheel bearing on

you need to take the tie rod off , the lower ball joint off , take the strut bolt out and remove the nut and washer off the cv axel then pull the whole hub Assembly off then the new bearing need to be pressed in , then reinstall everything not as hard as it sounds

Posted on Mar 09, 2009

  • 491 Answers

SOURCE: I need a diagram as to how the serpentine belt

autozone.com

Posted on Jun 09, 2009

ZJLimited
  • 17970 Answers

SOURCE: What is the procedure for removal of the radiator

Ford Contour/Mystique/Cougar 1995-1999 Repair Guide

Radiator -REMOVAL & INSTALLATION
(see Figures 1 through 7)

7249321.jpg
Fig. 1: Remove the upper radiator hose from the radiator


d2d2436.jpg
Fig. 2: Use a back-up wrench to remove the transaxle cooler line connections-automatic transaxle only


3213ac8.jpg
Fig. 3: the lower transaxle cooler line connection


ec9272d.jpg
Fig. 4: Remove the passenger side radiator mount and ...


956cd3d.jpg
Fig. 5: ... and the driver's side radiator mount


f06fec0.jpg
Fig. 6: The condenser can be support using mechanic's wire as shown here, or another suitable device


242d821.jpg
Fig. 7: Carefully lower the radiator out the bottom of the vehicle

  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Remove the upper radiator hose from the radiator.
  4. On 2.5L equipped vehicles, remove the radiator overflow hose from the radiator.
  5. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler inlet fitting and plug the line and the fitting.
  6. Remove the engine fan.
  7. Raise and support the vehicle.
  8. Remove the lower radiator hose from the radiator.
  9. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler outlet fitting and plug the line and the fitting.
Remove the cooler lines while holding the radiator connector with a back-up wrench.
  1. Support the radiator, and A/C condenser with a jackstand or other suitable device.
  2. Remove the lower radiator supports from the front of the subframe.
  3. Remove the two retaining bolts for the A/C condenser from the brackets at the bottom of the radiator.
  4. Position the jackstand aside and remove the radiator out the bottom of the vehicle.
To install:
  1. Carefully raise the radiator into place and support the radiator with a jackstand or other suitable device. Install the two retaining bolts for the A/C condenser into the brackets at the bottom of the radiator.
  2. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm).
  3. Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower radiator hose to the radiator.
  4. Lower the vehicle.
  5. Install and tighten the fan shroud nuts.
  6. Install the transmission cooler inlet line (if equipped) and the upper radiator hose to the radiator.
  7. On 2.5L equipped vehicles, install the radiator overflow hose from the radiator.
  8. Connect the negative battery cable.
  9. Fill the cooling system with the proper 50 / 50 mixture and start the vehicle.
  10. Bleed the cooling system and check for leaks.

Hope helps with this (remember rated this help) Good luck.

Posted on Jan 20, 2010

  • 2 Answers

SOURCE: i need a fuse box diagram for a 1998 mercury

I need a fuse panel diagram for a 98 mercury sable and i dnt have a manual for the car

Posted on Mar 29, 2010

  • 1 Answer

SOURCE: 1995 mercury mystique starter replacement process?

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a 1998 mercury mystique, it needs front wheel bearing replaced, is there a video out there that can help ?


You'll need special tools to re seat the new races in the hub. The old races can be pushed out with a brass drift and a hammer. Same for the seal.

Sep 12, 2016 | 1998 Mercury Mystique

1 Answer

Where is the selector lever lock for gearshift on 1998 mercury mystique?


I have a 99. On my car, there is a small notch in the center console cover on the bottom right, just by the front of the passenger seat. Stick a screwdriver in there and move the point backwards to trip the release.

Jan 20, 2013 | 1998 Mercury Mystique

1 Answer

What tools are needed on removing radiator on 1998 mercury mystique


either channel lock pliers or a phillips and flathead screw driver for hose clamps(depends on what type you have) and a socket and ratchet set along with an endwrench set

Mar 14, 2012 | 1996 Mercury Mystique

1 Answer

Inner tie rod bent on a 1998 Mystique GS; how to remove? A diagram would be great.


If the steering rack is good & your keeping it,
you go to a front end shop,not a chain store place

There are special tools to remove the inner tie
rod & then it has to be aligned

If you bent a tie rod, I suspect the rack is ruined
& who knows what else!

Jun 27, 2011 | 1998 Mercury Mystique

1 Answer

What are the timing marks for a 1998 mercury mystisque 4cy....I need to know how to position them


1998 Mercury Mystique 2.0L MFI DOHC 4cyl

e842492.jpg

align the camshafts and the...

20f3fce.gif

Fig. 5: Alignment marks for timing chain installation-left hand side

3da874c.gif

Fig. 6: Alignment marks for timing chain installation-right hand side

Hope thats help.

Feb 02, 2010 | 1998 Mercury Mystique

1 Answer

1998 Mercury Grand Marquis GS runs Rough when cold


I have the same problem and can
Not figure it out did u have any luck?

Feb 02, 2010 | 1998 Mercury Mystique

Not finding what you are looking for?
1998 Mercury Mystique Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...