At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My 2001 toyota sienna bogs out, ses light keeps...
SES light blinking is BAD... get a shop to scan it for you and fix it ASAP. Your engine is misfiring and damaging the catalytic converter. You may already have damaged it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the ABS sensor is not hooked up. The sensor is behind the brake rotor attached to the spindle where the axle shaft sticks thru. You might want to have the computer scanned for codes to make sure the light is on for the same wheel the axle was removed from.
The light is a warning that a fault exists in the Anti Lock Brake System, and is off line - not working. As there are many componets involved, it will need to be scanned to find the cause.
Brake loose connection between cat and exhaust manifold , it will allow exhaust gas to go out before cat , and see if it's restore the power on the engine.
If it does then your cat is clogged.
If not it's also might be Throttle Position Sensor , or Mass Air Flow Sensor.
You can't remove cat , you have to replace it if it's bad. Cat is a part of Emission control system.
I have a 2001 Sienna and have had to replace most of my tail light bulbs.
The bulbs that are mounted in the fender (wrap arounds) have acess panels in the van's interior that easily pop out and expose the back of the light assembly.
However, the bulbs that are found in the lift gate are a different matter. You have to remove the whole interior panel to the lift gate to expose the light assemblies. Go to your auto parts store and get a tool to help pop out the plastic retainers from the lift gates metal frame. Don't force the retainers out. Go slowly and gently so that you don't damage the interior panel. If you are really gentle you might even get to reuse the retainers.
×