Question about 1988 Jaguar XJ6

Open Question

What does Circuit 1 & 2 failure, low brake pad, and anti-lock brake failure mean these are the warnings that shows up when the car is turned on?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 449 Answers

SOURCE: anti-lock dash warning illuminated

check brakes fluid level and also check to see if the sensor was connect back after the pads was change. If all is ok then take it to Auto Zone and they will scan it and clear the code for free also you can clear the code by disconnecting the negative battery lead for 10 seconds but this might make your radio ask for a code in order to play it. good luck

Posted on Jan 20, 2009

  • 1 Answer

SOURCE: i have a 1988 3.6 auto daimler vanden plas. on my

I to have a 1988 Daimler 3.6 vanden plas. I would greatley appreciate if some one could let me know about any information on this model, ie; what made the vdp different from the standard daimler 3.6, production numbers and origional cost. In regards to your question, my daimler also said it had fuel failure. I put some injector cleaner in with the petrol and the warning hasnt come up since. As for the circuit 2 failure, it could be numerous things, but start with checking the fuses in the left side fuse box. It could also mean that a light bulb or other elecrical item has a broken circuit somewhere.

Posted on Mar 19, 2009

  • 8 Answers

SOURCE: brake pad warning light on golf gti 1.8t 1999 t reg

your brake pad sensor probably worn low on your brake pads itself, renew your brake pads and your sensors aswell.,

Posted on Jul 23, 2009

  • 87 Answers

SOURCE: the ABS anti lock warning light is on

Could be as simple as low fluid level in the master cylinder. Check that first and then if it is not low or filling it and making a few starts and stops does not kill the light then stop by your local parts store and they will read your codes for free and tell you what the problem is. Free is good, bad brakes is bad, but hopefully it is just the fluid level.

Posted on Nov 13, 2009

  • 12 Answers

SOURCE: rear Anti Lock & Brake indicator lights come on

There is a sensor on top of rearend housing. Remove it and clean off the debris (will be fine metallic particles)-replace sensor-reset the computer (disconnect battery power for a few moments-reconnect battery-you're done. If this does not work-you'll have to replace the sensor.

Posted on Apr 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Meaning of warning lights


Manufacturers spend billions of dollars a year refining their cars' on-board diagnostics systems. However, all of the sophisticated diagnostics in the world will do little good if you don't know what the warning lights mean.
Purpose
Modern automobiles have dozens of sensors to monitor engine, braking and chassis performance. Any deviation from the car's established limits will trigger a dashboard warning light.


Check Engine Light
Check engine lights can indicate failure of the emissions system, fuel injection system, faulty sensor feedback, overheating or lack of voltage, transmission failure, and engine knock ignition system failure.


Brake Lights
Almost all cars have two separate lights for the braking system: a red "ABS" (anti-lock braking system) light and "Brake Warning" light. The former indicates failure of the electronic anti-lock system, the latter a loss of fluid pressure in the brake system itself.


Dynamic Warnings
Many modern cars have traction or stability control systems that prevent and notify the driver of tire slippage. These lights can come in the form of amber "SLIP," "TC," or "TRACTION" lights (for spinning tires), or "ESC" (electronic stability control) lights for a sliding vehicle.


Safety Lights
Most cars have a diagrammatic warning that indicates a door that isn't all the way closed, a seat-belt warning light, and an "airbag disabled/enabled" light. Any or all of these will be red or amber.


Read more: Car OBD2 diagnostic tool

Jul 25, 2012 | Cars & Trucks

Tip

Komatsu Fault Codes


E02 PC-the EPC system;
E03, Swing parking brake system;
E10, the engine controller power failure, the engine control drive system circuit malfunction (this engine stall;
E11, the engine control system failure (decrease of output power, in order to protect the engine);
E14, the feedback system abnormalities;
E15, engine sensors (temperature, fuel pressure, oil pressure) fault;
EOE, a network failure.
The fault code: the 989L00 the engine controller lock warning (mode 1).
989M00, the engine controller to lock warning (mode 2).
989N00, the engine controller to lock warning (mode 3).
AA10NX air filter clogging.
AB00KE charging voltage is too low.
B @ BAZG, low oil pressure.
B @ BAZK, the oil level is too low.
B @ BCNS, engine coolant overheating.
The @ B BCZK the coolant level is too low.
B @ the HANS, the hydraulic oil from overheating.
CA111, the engine controller internal fault.
CA115, the engine speed sensor and backup speed sensor failure.
CA122, the intake air pressure sensor feedback voltage is too high failure.
CA123, the intake air pressure sensor feedback voltage is too low failure.
CA131, the throttle plate sensor feedback voltage failure.
CA132 throttle plate sensor feedback voltage and low failure.
CA144, high coolant temperature sensor feedback voltage fault 145, the coolant temperature sensor feedback voltage is too low failure;
CA153, intake air temperature sensor feedback voltage is too high failure;
CA154, intake air temperature sensor feedback voltage is too low failure;
CA155, the intake air temperature is too high (over limit);
CA187, sensor power supply voltage is too high failure;

More Fault Codes HERE http://truckmanual.weebly.com/komatsu-fault-codes.html

on Dec 20, 2016 | Cars & Trucks

1 Answer

When driving or starting the car i notice when using the brakes it makes a squeaking noise - not all the time think its possibly damp causing it as it was raining yesterday and it happened but no rain...


To address your first problem squeaking brakes aka "brake squeal", is most often casued by one or 2 things: "Pad vibration" or a "low brake warning sensor".

Pad vibation is usually caused by ineffective pad anti-rattling clips & hardware that allow the pads to vibrate at a super fast speed whenever the brakes are applied, thus causing a high pitch brake squeal. To correct this, replace all the pad hardware and anti-rattling clips and make sure you use a quality pad set that has anti-rattling plates attached to the backs of them. Weather conditions do affect brake squeal, that is why it seems to be worse at times.

Low brake warning sensor squeal occurs when your brake pads reach the point of replacement, the sensor attached to the pads scrapes on the rotor which produces a high pitch squealing sound to warn you it's time for new pads.

As far as your second problem goes (a knocking sound), I'll need more information about the problem before I can offer a possible cause (eg. happens on left or right turns, while going over bumps, at high or low speeds, accellerating...).

Sep 22, 2011 | 2001 Ford Focus

1 Answer

The indicator lights on my dash for the anti-lock, the brakes,and low tire won't shut off eventhough i just fixed all three.


IF YOU SEE ANTI LOCK AND BRAKE WARNING LIGHTS YOU HAVE BRAKE FAILURE.NOT SAFE TO DRIVE CAR.BEST TO LET DEALERSHIP FIX ABS BRAKES MODULATOR MASTERCYLINDER UNIT AND THEY CAN RESET LOW TIRE LIGHT.VECHICLE NOT SAFE TO DRIVE.

Jul 28, 2011 | 1999 Oldsmobile Alero

1 Answer

(!) with a squiggly line in-between 2008 dodge caravan


Sounds like a brake light. Check your brake fluid and fill to the correct level if low then see if it goes out.

The Brake light says "BRAKE" is the Brake System Warning Light: "This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system (if equipped)."

Another is the Anti-Lock Brake System Light: "This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on."

It could also be the Tire Pressure Monitoring light. Check the brake fluid first and see if that fixes it.

Mar 23, 2011 | 2007 Dodge Caravan SXT Minivan New Cars

1 Answer

What tools needed to replace front brake pads & rotors


Brake Pads
Removal & Installation
Front





3.4L front disc brake assembly
toy_4run_34_frontbrakeassembly.gif








4.0L and 4.7L front disc brake assembly
toy_4run_frontbrakeassembly.gif



To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Front wheel
    • Clip, 2 caliper pins, the anti-rattle spring then remove the 2 brake pads
      and the 4 anti-squeal shims

To Install:

CAUTION
Only replace brake pads on 1 side of the
vehicle at a time. Failure to use this procedure could cause the caliper pistons
on the opposite side of the vehicle to pop out requiring the reconditioning or
replacement of the brake caliper.


  1. Remove a small amount of brake fluid from the master cylinder.
  2. Install a used brake pad into the caliper and compress the caliper pistons.
  3. Apply disc brake grease to both sides of the inner anti-squeal shims.
  4. Install or connect the following:

    • Anti-squeal shims to the new brake pads
      NOTE: When replacing worn pads, the anti-squeal shims must be replaced
      together with the pads.

    • 2 brake pads
    • Anti-rattle spring and the 2 caliper pins
    • Clip
    • Front wheel

  5. Depress the brake pedal several times to seat the brake pads.
  6. Check the brake fluid level and top off as needed.

Rear
To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Rear wheel






      toy_4run_rearcalbolts.gif



    • 2 cylinder slide pins from rear caliper assembly
    • Caliper assembly from rear caliper mounting
    • 2 brake pads with anti-squeal shims from rear caliper mounting
    • 2 anti-squeal shims from each disc brake pads
    • Pad wear indicator plate from the inner side disc brake pad
    • 4 pad support plates from the rear caliper mounting

To Install:


  1. Install or connect the following:

    • 4 pad support plates on the rear caliper mounting
    • Pad wear indicator plate on the inside brake pad
      Note: Install the pad wear indicator facing downward.

    • Anti-squeal shims on each brake pad
    • 2 disc brake pads with anti-squeal shims to the caliper assembly

  2. Apply lithium soap base glycol grease to the sliding part of 2 caliper slide
    pins.
  3. Install or connect the following:

    • Disc brake caliper assembly with 2 caliper slide pins
    • Torque to 65 ft-lbs (88 Nm)
    • Rear wheel

  4. Depress the brake pedal several times to seat the brake pads.
  5. Check the brake fluid level and top off as needed.
--- Removal & Installation
Front
To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Front wheel
    • Front brake caliper assembly

  3. Make matchmarks on the disc and the axle hub.
  4. Remove the front disc.

To Install:


  1. Align matchmarks and disc onto axle hub.
  2. Install or connect the following:

    • Front brake caliper assembly with the 2 bolts

      1. Torque to 90 ft-lbs (123 Nm)

    • Front wheel

Sep 23, 2010 | 2003 Toyota 4Runner

1 Answer

On a 2001 ford taurus what is the exclamatin point on the dash? The light comes on and goes off at times.


Hope this helps.
df697aa.gif


Item Part Number Description 1 — Instrument cluster 2 — Odometer reset shaft 3 — Air bag warning indicator 4 — RH turn signal indicator 5 — Charging system warning indicator 6 — Tachometer 7 — Low oil pressure warning indicator 8 — Brake system warning indicator 9 — Cruise control indicator 10 — Check fuel cap indicator 11 — Anti-lock brake system (ABS) warning indicator 12 — Check transmission indicator 13 — Odometer 14 — Transmission range selector indicator 15 — Trip odometer 16 — Theft indicator 17 — Low coolant indicator (if equipped) 18 — Safety belt warning indicator 19 — Low fuel warning indicator 20 — Fuel gauge 21 — Malfunction indicator lamp (MIL) 22 — Door ajar warning indicator 23 — Traction control indicator (if equipped) 24 — Engine coolant temperature gauge 25 — High beam indicator 26 — LH turn signal indicator 27 — Speedometer

Jun 05, 2010 | 2001 Ford Taurus

1 Answer

Does the 1992 dodge dakota automatic trans have a fuse to overdrive button


The fuse number is

#16 - 5 Amp (Tan)

Gauges & Indicator Lights: Low Oil Light, Low Washer Light, Service Reminder Light, Transmission Oil Light, Brake Warning Light, Anti-Lock Brake Warning Light, Fuel Pacer Light, 4WD Indicator Light, Malfunction Indicator Light, Warning Buzzer, Overdrive Switch (1992-93); Transmission Oil Temperature Lamp, 4WD Lamp, Overdrive Module Seat Belt Warning Buzzer
(1994-95).

Jan 25, 2010 | 1992 Dodge Dakota

3 Answers

Brake lights not working even though the brake peddle is pushed down The switch still goes in and out. Fuse box has some fuses missing. The fuse box does not have a desription on every plug of what it is...


Here are the numbers on your fuseblock and fuses coresponding to the number that is on your fuse block.
1-20 amp (yellow)
Hazard flasher
2-10 amp (red)
back up lights, A/C clutch cycling Switch
3-30 amp (green)
Power windows
4-30 amp (yellow)
A/C or heater blower motor
5-20 amp (yellow)
Panel Lights, Side marker lights, Park, Taillights, Clock & radio display Intensity, License & panel lights.
#6-10 amp (red)
Stoplight, buzzers, Anti-lock brake module
#7-15 amp (lt. Blue)
Tachometer, horn & Relay
#8-8 amp (yellow)
Power Door locks
#9-10 amp (red)
Radio
#10-10 amp (red)
Rear Wheel Anti-lock module, Turn Signals
#11-20 amp (Yellow)
Windshield wiper & washers
#12-15 amp ( LT. Blue)
Cigarette Lighter
#13-5 amp (tan)
Speed Control, warning buzzers, gauges, indicator lights
#14-5 amp (tan)
Time/delay relay & under-hood light, dome light, power mirrors, readio & clock Memory, Interior lights, reading lights
#15-blank
Not used
#16-4 amp (pink)
Radio Lights & overdrive switch light 1989-91, Cluster lights, Cigarette Lighter light & as tray light, Cluster lights, A/C & heater controls.
#17-relay
Hazard Flasher warning
#18-relay
Relay
#19-Circuit breaker
#20-relay
Turn signal Flasher
#21-buzzer
Warning
#22-Relay
Horn

Aug 04, 2009 | 1991 Dodge Dakota

1 Answer

Anti-lock dash warning illuminated


check brakes fluid level and also check to see if the sensor was connect back after the pads was change. If all is ok then take it to Auto Zone and they will scan it and clear the code for free also you can clear the code by disconnecting the negative battery lead for 10 seconds but this might make your radio ask for a code in order to play it. good luck

Jan 20, 2009 | 1999 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...