Question about 2002 Hyundai Santa Fe
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 hyundai santa fe 6
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.
OK... I hope this solve your question .
THank you for use fixya.
Posted on Jul 25, 2008
I would take it in to a shop and have a free brake inspection done. They will give you a list of things wrong , and you can go from there.
Posted on Nov 19, 2008
OK IS THERE IS ACTUALLY A mis-FIRE THIS VEHICLE SHOULD BE SHAKING DURING IDLE AND ACCELERATION IF IT IS, here is what you do get a noid light this used to check injector pulse. This vehicle will set a misfire code if injector is not functioning efficiently or bad. A noid light is like a test light bulb can be bought at almost any auto store.SART UP VEHICLE AND DISCONNECT THE INJECTOR WIRE TO THE CYLINDER THAT'S mis-FIRING AND CONNECT noid LIKE TO ELECTRICAL PLUG. DO THIS ONE CYLINDER AT A TIME. The nod light should have a steady flickering light/consistent pattern of flickering. If there is Gap/irratic flickering or no flickering BINGO you have found your problem. NO FLICKERING= bad/broken injector wire if not broken BAD COMPUTER/ECU. IF THE FLICKERING IS CONSISTENT /GOOD = BAD INJECTOR..replace injector and solve the misfire problem. However is all the components tested are ALL GOOD. Then the only other SOURCE for a mis-fire is the camshaft sensor that provides reference for injector pulse and the crankshaft sensor provide reference for Spark pulse. JUST ON A LAST NOTE: make sure all oils are getting electrical power to them. Good Luck I know this is alot of info at once. Contact me if you need more help. Thanks fr using FIX YA
Posted on Jan 08, 2009
try these websites to see if they have your car listed www.autozone.com and the other one is www.alldatadiy.com and if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.
Posted on Jun 03, 2009
On the 2.7 V6, you have to remove the surge tank from the intake manifold to gain access to the ignition wires and the spark plugs. 2hr job.
Posted on Jun 26, 2009
Tips for a great answer:
Aug 17, 2014 | 2002 Hyundai Santa Fe
Mar 07, 2013 | 2001 Hyundai Santa Fe
Jan 15, 2012 | 2002 Hyundai Santa Fe
Jan 11, 2011 | 2002 Hyundai Santa Fe
Dec 02, 2010 | 2002 Hyundai Santa Fe
Apr 24, 2010 | 2002 Hyundai Santa Fe
Apr 21, 2010 | 2002 Hyundai Santa Fe
Mar 23, 2010 | 2002 Hyundai Santa Fe
Jun 03, 2009 | 2002 Hyundai Santa Fe
Apr 02, 2017 | 2002 Hyundai Santa Fe
714 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: