Question about 1999 Chevrolet Corvette

1 Answer

1999 corvette a/c problem. When I press the a/c button to turn the a/c on the button flashes several times and then shuts off. Nothing happens. Tried holding the button in for 15 seconds watching it blink but as soon as I release the light goes out. Any takers???

Posted by on

  • lenluzhak Sep 06, 2010

    Will try it and thanks for the info!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 182 Answers

It sounds like it needs the control head replaced

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

When I turn the key in my 1986 corvette, nothing happens. no sound at all


The vats system is not working you need to by a by pass. If you remove key shut and wait about 3minutes system should reset and car will start.

May 16, 2012 | 1986 Chevrolet Corvette

1 Answer

HOW DO I RESTET CHANGE OIL LIGHT ON 1990 CORVETTE


Corvette 1990-1996

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using FixYa.

Jose.

Oct 19, 2011 | 1990 Chevrolet Corvette

1 Answer

I SHUT OFF MOTOR SOMETIMES IT WILL TURN OVER BUT WILL NOT START TILL I WIAT ABOUT 3 MIN. HAPPENS ONLY WHEN MOTOR IS WARM. HAS HAPPENED ONCE WHILE DRIVING JUST SHUTS OFF. DOES NOT MISS OUT ,OR SPIT AND...


I used to work at a GM dealer and we had this problem several times witht these cars 80% of the time it was the coolant temperature sensor 10% of the time it was Cam sensor and 10% of the time it was the crank sensor. I wish I could be more specific but with out actually performing test its hard to say. It is a common problem with these vehicles.

Feb 24, 2011 | 1994 Chevrolet Corvette

2 Answers

All at once, the turn signals started to flash fast, Now I know that normally means a bulb is out. But when the turn signal, either one is turned on, the driving lights flash oppiste of both signals and I...


Pull the steering wheel and clean the turn signal switch and look for broken parts. If that doesn't fix it, then replace the turn signal wand on the steering column.

Nov 18, 2010 | 1999 Chevrolet Corvette

1 Answer

JUST BOUGHT 1999 CORVETTE. RIGHT WIDOW DOES NOT


The window is likely due to a worn window motor. The reason the turn signals are flashing fast is due to a burned bulb on the right side. Replace the bulb and that will go away. Let me know if you need anything else.

May 23, 2010 | 1999 Chevrolet Corvette

1 Answer

DASH LIGHTS AND TAILLIGHTS WONT TURN ON WHEN I TURN ON MY HEAD LT


Mine does something similar, but it never does it when I have the twilight option on in the options menu.

Aug 15, 2009 | 1999 Chevrolet Corvette

1 Answer

How to turn off change oil light on 2001 Corvette


Unless there is something wrong with you buttons the procedure is as follows:
1. Turn ignition key to ON (not start)
2. Press ENG MET button on trip monitor & release, then press it again within 5 seconds.
3. Within 5 seconds again press and hold GAUGES button until Change Oil lamp flashes.
4. Continue Holding Gauges button until lamp stops flashing & goes out.
5. You should be done, start & shut off car. If it didn't work turn off car and start from top.

Some buttons are very sensitive so try and be deliberate & steady when holding.

If that helps please rate my answers!
Brett

Mar 19, 2009 | 1994 Chevrolet Corvette

2 Answers

How do I turn off the change oil light on a 1994 corvette


1. Turn the key to “Run,” but don’t start
2. Press “ENG MET” on the Trip
the engine.
Monitor. Then, within five seconds,
press it again.
3. Within five seconds, press and hold
“GAUGES” on the Trip Monitor. The
“CHANGE OIL” light should flash.
4. Hold the “GAUGES” button until the
“CHANGE OIL” light stops flashing
and goes out. This should take about
ten seconds.
When the light goes out, the monitoirs
reset. If the monitor doesn’tr eset, turn the
ignition off, then try again.

Nov 18, 2008 | 1994 Chevrolet Corvette

Not finding what you are looking for?
1999 Chevrolet Corvette Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...