Question about 1994 Chevrolet Camaro

1 Answer

How to change the starter from my 1994 chevy camaro

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

REMOVAL & INSTALLATION 3.4L and 1993-95 5.7L Engines

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. If necessary for access to the starter, disconnect the exhaust crossover pipe from the manifolds.
  4. Unfasten the two starter mounting bolts/screws and carefully lower the starter motor.


To install:

Before attaching the electrical connectors, tighten the inner nuts on the solenoid terminals. If the nuts are not tight, the solenoid cap could be damaged during installation of the leads. Tighten the inner nut of the "BAT" terminal to 80 inch lbs. (9 Nm).
  1. Fasten the electrical leads to the starter motor assembly. Tighten the solenoid switch "BAT" terminal outer nut to 80 inch lbs. (9 Nm) and the "S" terminal nut to 22 inch lbs. (2.5 Nm).
  2. Position the starter motor to the engine and install the retaining bolts/screws. Tighten to 35 ft. lbs. (47 Nm).
  3. Measure the starter pinion-to-flywheel clearance and add shims, if necessary.
  4. If removed, connect the exhaust crossover pipe to the manifolds.
  5. Carefully lower the vehicle, then connect the negative battery cable. Tighten the cable to 11 ft. lbs. (15 Nm).

Hope helps.

Posted on Sep 06, 2010

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: Power Steering Pulley for 1994 Chevy Camaro V6 manual

Yep, Their Right. A Salvage Yard is your Only Choice. although you can try Chevy-Classic-Parts.com They are here in OKC and carry a LOT of Classic Parts.

Posted on Jan 15, 2009

rick_amick
  • 69 Answers

SOURCE: 1994 chevy camaro driver door will not open. all

With the window down, reach inside and find a place to the rear on the door that you can lift from. Then try lifting while you pull on the handle. I have seen the door hinge bushings get bad and let door sag, and then the latch won't release from the striker.
Its the only thing I can think of as being the problem if everything is moving inside the door as it should. If you do get it open you can check the bushings by having the door almost to the closed position and lift up on it if they are bad you will feel the play in the bushings. If this is the problem you can replace just the bushings and not the whole hinge. Thats when you are probably going to have to talk to a body shop.

Posted on Apr 19, 2009

  • 617 Answers

SOURCE: How do i fix a fuel pump on a 1994 chevy camaro

remove fuel tank, pump inside fuel tank

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Chevy Camaro, 6 Cylinder, stalling problem


Try cleaning the throttle body and the idle speed control valve, they get full of sludge and this causes stalling. Use a product called CRC Throttle valve cleaner on both parts, DO NOT USE CARB CLEANER IT WILL RUIN THE PARTS.

Aug 18, 2016 | 1994 Chevrolet Camaro

1 Answer

Will a tahoe or blazer or suburban starter interchange witb 1994 chevy camaro 350


try it and see would be the easiest way as there are a few too many varients to say yes or no

Apr 22, 2014 | Cars & Trucks

1 Answer

Firing order diagram for a 5.7L Z-28 Chevy Camaro


1994 Chevrolet Camaro 5.7 liter DOHC V-8 VIN "J"

64e9008.gif

Hope helps (remember rated this).

Aug 07, 2010 | 1994 Chevrolet Camaro

2 Answers

How do i fix a fuel pump on a 1994 chevy camaro


remove fuel tank, pump inside fuel tank

Feb 05, 2010 | 1994 Chevrolet Camaro

1 Answer

I need to change a transmission mount in a 1994 camaro


Get a Haynes manual, or better yet, a Chevy manual. Renting a transmission jack can be very helpful. My opinion is, if you have to ask here, you might be in over your head. This is not a trivial, and possibly dangerous job.

Oct 03, 2009 | 1994 Chevrolet Camaro

1 Answer

Power Steering Pulley for 1994 Chevy Camaro V6 manual


Yep, Their Right. A Salvage Yard is your Only Choice. although you can try Chevy-Classic-Parts.com They are here in OKC and carry a LOT of Classic Parts.

Jan 15, 2009 | 1994 Chevrolet Camaro

3 Answers

1994 chevy camaro


it could be your timing belt is slipping or missing some cogs .
f88d7a7.jpg4f12372.jpg7425a42.jpgroughly 4.5 hrs on garage time / took me 4-5 hrs just to get the belt off / pile of work involved .change the timing belt every 60,000k or lol welcome to the car world where you will be nickeled and dimed to death ... happy new years

Sep 19, 2008 | 1994 Chevrolet Camaro

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...