Question about 2001 Dodge Stratus

Open Question

Need to remove crankshaft pulley on 2001 dodge stratus 3.0

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 393 Answers

SOURCE: Crankshaft pulley (vibration damper) moved forward.

the pulley is also a dampener often times they seperate from each other. replace pulley/dampener.

Posted on Nov 18, 2008

Ad
  • 95 Answers

SOURCE: What is the trick to removing the harmonic balancer on a stratus

Theres no trick. It has to be cocked or something from all the pulling. Try tapping it back on, use spraylube on the crank and try again. Good luck.

Posted on Mar 23, 2009

polarcycle
  • 1392 Answers

SOURCE: 2004 DODGE STRATUS 2.7L, Location of Crankshaft Position Sensor?

it is located on the right side of the motor, in the trans area. Actually in the bell housing.

Posted on Jun 23, 2009

  • 523 Answers

SOURCE: Crankshaft Woodruff Key Removal

You are correct, this key does drive both. While I have never tried to remove the keway with out both pulley and lower sprocket you may be able to (my gut says no but anything is worth trying once) I'd position the keyway at the 12 o'clock postion and with a good pair of needle nose pliers see if the key will roll out as you pull up and away with it. If it will not you'll of course have to remove the front of the engine and pull the timing belt, if over 60K miles on belt go ahead and replace with new.

I hope this may have assited and good luck!

Tom

Posted on Apr 09, 2010

ftw1952
  • 10319 Answers

SOURCE: I can't get the crankshaft damper pulley off.

Download this link and find your Service manual for your vehicle. It will serve you well and to keep for future reference

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge stratus r/t 3.o liter outside pulley on harmonic balancer fell off. do i need whole new balancer or is there something that came off that holds it on?


ON most engines there is only on pulley as part of the harmonic balancer. It is the on that has the rubber between the pulley and the center bit on the crank. Any other pulleys are normally bolted to this pulley on the center hub piece . I'm thinking that the mount bolts have fallen out.

Apr 20, 2013 | 2001 Dodge Stratus

1 Answer

How to put a water pump on a dodge stratus 2004


The water pump is timing belt driven .so wil need to remove the engine mount,the timing belt cover and the crankshaft pulley (harmonic balancer). Then you will loosen the tensioner . Now u can remove the belt . Might need to remove the alternator and it's bracket so that the water pump will come out.

Nov 26, 2011 | 2004 Dodge Stratus

1 Answer

How do i get the crankshaft pulley off


The crankshaft pulley is "press-fitted" onto the crankshaft. A special cranshaft pulley remover tool is required to remove it. (See picture below)

Many parts retailers like AutoZone and Advance Auto have this tool available as a "loaner" or "rental".
The loaner programs usually require you to pay the purchace price of the tool up front, then will give you a FULL refund when you return the tool to the store.


10_11_2011_12_20_31_pm.jpg

Oct 11, 2011 | 2001 Dodge Stratus

1 Answer

Remove & replace rod bearing on 2001 dodge stratus how do I remove & repplace rod bearing without having to take motor out


if you think it needs rod bearings, it needs a lot more than that, the engine has to come out and apart. what engine size? its going to be expensive, crankshaft, oil pump, ect. if it has a 2.7 engine they are bad news.

Sep 14, 2011 | 2001 Dodge Stratus

1 Answer

How do you remove the crankshaft from 2004 dodge


What size engine. You want to know how to remove the crankshaft pulley right?

Jul 04, 2010 | 2004 Dodge Stratus

1 Answer

I can't get the crankshaft damper pulley off of a 2000 Dodge Stratus, 2.4L, DOHC. My end goal is to remove the timing belt. I have already removed the accessory drive belts, but cannot remove the...


Download this link and find your Service manual for your vehicle. It will serve you well and to keep for future reference

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 02, 2010 | 2000 Dodge Stratus

1 Answer

How do you remove the crankshaft pulley on a 1998 dodge stratus to get at the water pump?


Dear Stratus,
In order to remove the crankshaft pulley you need to buy the applications specific crankshaft pulley puller kit from a snap on or matco or mac tool truck.These kits are not found at autozone or checker schucks kragen.After that the removal is a cinch, any more questions get back to me, HOPE I COULD HELP!!!

Nov 23, 2009 | 1998 Dodge Stratus

1 Answer

2001 dodge stratus R/T- serpatine belt fell off- why-


correct sounds like the balance pully fell apart, common problem.the outter ring with grooves to hold belt is held together by rubber,wears out and falls apart,must replace that crank pulley,remove center bolt use a puller to remove pully, then install new one and belt.( must be a puller for newer dodges 1999 and up to work.hope this is helpful.

Oct 04, 2009 | 2001 Dodge Stratus

1 Answer

Need the tool to take the crankshaft off of a 2002 Dodge Stratus


I think you mean the harmonic balancer, which is the pulley mounted at the front of the crankshaft. (You need to remove the engine and all of the pistons to remove the crankshaft itself.) Check your local parts store for a harmonic balancer puller -- I got one from NAPA for about $75 that allowed me to pull the balancer without removing the radiator/condenser.

Jun 12, 2009 | 2002 Dodge Stratus

Not finding what you are looking for?
2001 Dodge Stratus Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...