Question about 1999 Ford Crown Victoria

Open Question

Remove a dashboard off a 1999 ford crown victoria

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

CLEONTI
  • 33 Answers

SOURCE: need wiring diagram for 2008 ford crown victoria

Hello,

You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.

Hope this helps,

Chris

Posted on Mar 23, 2009

  • 27 Answers

SOURCE: 1999 ford crown victoria intake manifold crack

ford made these w plastic water passage no recall need to buy new intake w all aluminum kragens is pretty cheap

Posted on May 23, 2009

mindreader
  • 578 Answers

SOURCE: I need the fuse diagram for a 2001 crown victoria

go to
http://www.motorcraftservice.com/pubs/content/~WO1CRO/~MUS~LEN/41/01croog4e.pdf
and check out pages 156 - 161. They provide all you have asked for!

Posted on Oct 11, 2009

  • 11 Answers

SOURCE: Headrest removal on a 1999 Ford Crown Victoria LX

If you unscrew the black pieces around the posts, lift them up and pull back gently on the seat material. There are 2 wire clamps around each post. Simply use a flathead screw driver and stretch the clamp to release the headrest.

Posted on Apr 24, 2010

lbrown1806
  • 488 Answers

SOURCE: How to replace 1999 Ford Crown Victoria Headlights

remove plastic ring at rear of light. Pull light out of housing. Lift L-shaped tabs and remove housing if replacing whole lens.

Posted on Aug 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with 99 crown vic when it won't switch from heat to air condition?


Sounds like possible bad blend door actuator cor temperature control. They're very common concerns with these cars.part is fairly cheap, down side is the dashboard has to come out, it can be done without removing dash,but you need to find someone that is familiar with these...

May 05, 2014 | 1999 Ford Crown Victoria

1 Answer

Headrest removal on a 1999 Ford Crown Victoria LX


You should be able to push and hold the button that lets you adjust it up and down and then just pull it up.

Oct 10, 2010 | 1999 Ford Crown Victoria

1 Answer

Where is the inertia fuel shut off for a 1999 crown victoria?


Front passenger front kick panel (behind plastic trim - dont break trying to remove)

Sep 23, 2010 | 1999 Ford Crown Victoria

1 Answer

My headlights and dashboard stopped working on my 99 crown victoria, how do i fix it


Possible failure of the park/headlamp fuse which is in the main fuse box located under the dashboard.
Look underr the inscription of park lamp/H lamp for the blown fuse and change with the spare.

Sep 18, 2010 | 1999 Ford Crown Victoria

1 Answer

1999 Crown Victoria: What is the schedule for replacing the timing belt...


this car does not have a timing belt! its a chain ! 2 timing chains ! normally at 100.00 0 miles you will hear them making noise

May 17, 2010 | 1999 Ford Crown Victoria

1 Answer

How do I remove the head rests on my 1999 Ford Crown Victoria. They are bucket seats. ex cop car


Pull up on the headrest to the top ,there should be two screw's holding the collare of the head rest in place.

Mar 07, 2010 | 1999 Ford Crown Victoria

1 Answer

Dash lights


have to remove the instrument cluster, careful with the little shift wire, don't break it. best of luck

Aug 07, 2009 | 1999 Ford Crown Victoria

1 Answer

Stereo removal


if you have unit i think you have look for 2 holes 1/8 inch in dia on both sides take a coat hanger and cut 2 12 inch lengths and bend into semi circles and insert into holes firmly and it will slide out if not have a friend pull on the radio while you push on your new ford radio tools

May 27, 2009 | 1997 Ford Crown Victoria

1 Answer

1999 crown victoria


You don't.
The dash has to come out in order to remove the HVAC box to get to it.

Apr 29, 2009 | 1999 Ford Crown Victoria

2 Answers

How to replace 1999 Ford Crown Victoria Headlights?


Lift the two brackets that support the head light and the light will come out to the front. You may need a big screwdriver to pull out the bracket.

Mar 22, 2009 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...