Question about 2002 Jaguar X-Type
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i own a 2002 jaguar
I believe the size is the measurement from any of the flat sides of the lug nut across to a flat side directly across from it. So to make it easy to measure, just remove one, and I assume it would be measured as metric. An easier way would be what size metric socket fits the lug nuts? That would be the nut size.
Posted on Dec 16, 2008
I have an 04 xj8. the lug nuts are a good bad example of half baked engineering. the lug nuts are fabricated from ugly steel with an 11/16 hex end. to beautify this, Jaguar overlays the nut end with a stainless steel 3/4 inch cap, crimped to the nut. On top of this, the nut is to be torqued to 90+ ft-lb! The only way to remove the lug nut without damage is with a SIX POINT socket and a breaker bar or an impact wrench. Using a 12 point socket will deform the cap, causing the wrench to spin on the cap and or the cap to spin on the nut itself. If that has happened, it is possible to recover using a 15 oz or thereabouts ball peen hammer and a deep 3/4 inch impact socket (the black ones). Line up the socket to the cap, doing a best guess to where the flats are and give the socket a light blow. Keep trying that until the socket seems to stick on, then hit it harder. Eventually you will find the right point and the socket will go on and reform the cap. Then a breaker bar can remove the cap/nut. New assemblies can be had for about $6 from "partsbin" or "autohausaz".
Posted on Apr 21, 2009
looks like you will have to get another rim, and have someone blow off the nuts with a tourch. all studs will have to be replaced
Posted on May 27, 2009
find one size down socket and extension bar then use hammer carefully but firmly to bray onto lug nut once on use ratchet with a piece of pipe placed over topof ratchet handle for extra leverage and should crack off if not u can buy extraction kit from motorspares shop or you could hit top of nut with chisel to score then take normal wheelnut thread on backwards ie flat edge first ov er-tighten then slacken this should cause it to get a bite of lugnut and loosen both hope this helps
Posted on Dec 11, 2010
Tips for a great answer:
Sep 04, 2011 | 2002 Jaguar X-Type
Dec 07, 2010 | 2002 Jeep Grand Cherokee
Nov 19, 2010 | 2003 Jaguar X-Type
May 29, 2010 | 2002 Volkswagen GTI
Nov 11, 2009 | 2000 Jaguar S-Type
Sep 07, 2009 | 2003 Jaguar X-Type
May 27, 2009 | 2002 Jaguar S-Type
Apr 11, 2009 | 2003 Jaguar X-Type
Dec 16, 2008 | 2005 Jaguar S-Type
198 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: