Question about Chevrolet Silverado 3500HD

1 Answer

Engine cranks but wont start, replaced the fuel filter,fuel pump works, fuel relay works, theres spark to engine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What year? if it a 350. take 12 volts directly to the distributor. if its cranking then dump some fuel down the carb. that should make it run for a little. if you are getting spark you are not getting fuel if it won't start

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 ford explorer


Do you know how to do basic automotive electrical testing ? When it won't start test to see what is missing , Spark , pull a plug wire an hold near ground while someone cranks the engine over . Is there spark ? Check fuel pump electrical circuit , fuel pump relay . Videos on youtube - crank - no - start .

Feb 19, 2017 | Ford Cars & Trucks

1 Answer

Why wont my 1996 ford explorer start it turns over but wont start


You need to determine whether or not it is getting fuel and spark. It needs both to start. Remove one plug wire and hold it close to the engine while someone cranks it over. There should be spark from the plug wire. If there is spark, you will have a fuel supply issue. Possible fuel pump/relay/wiring/fuel filter/injectors not working to name a few. If no spark, possible crank sensor/ignition module/wiring.

Oct 25, 2015 | 1996 Ford Explorer

1 Answer

My 1991 ford festiva wont crank replaced fuel pump and screen and fuel filter and fuel pump relay still wont crank and we have pushed the reset button what now help pls


Won't crank? Problem is with starter-have it tested.
If it cranks and won't start, check for spark at one of the spark plug wires. If no spark when the engine is cranking, the ignition circuit is the problem.

Mar 01, 2014 | 1991 Ford Festiva

1 Answer

Wont start


I understand you replaced the relay but not the pump, right ?
Has the fuel filter been replaced recently ? Are you sure there is gas in the tank ?
You should be able to jumper the pump relay and check fuel pressure.

Aug 17, 2012 | 1998 Volvo S70

1 Answer

HAVE SPARK DUMP FUEL WONT START SAT OVER NIGHT TRK FIRED RAN A LITTLE AND WONT START AGAIN


REPLACE FUEL FILTER FIRST CRANK ENGINE.WHEN IT DIES AGAIN GET A FUEL PRESSURE READING WITH ENGINE OFF.IF FUEL PRESSURE REAL LOW OR ZERO FUEL RELAY FAULTY OR FUEL PUMP RELAY.FAULTY.

Aug 30, 2010 | 1991 Ford F150

1 Answer

1995 CRYSLER LHS,WONT START AT ALL,TRIED CHANGING SENSORS,FEUL PUMP,COIL PACKS AND COMPUTER BOXES,JUST WONT START?ANY IDEA?


If it is cranking with out turning over I would check the fuel pump and ignition relay, crank and cam sensors.
Basically you need to figure out if you have a spark issue or a fuel issue. (as long as you didn't have a serious overheating problem). One way to help you figure this out is by spraying in some starting fluid while cranking the engine. If it starts you have a fuel problem, if nothing then you have a spark problem (assuming you didn't blow the head gasket from overheating and was running normally before this happened).
Based on what you've already done here are my recommendations:
No spark: check ignition relay
No fuel: check fuel pump relay (aka shutoff relay, aka fuel pump shutoff relay), crank and cam position sensors, fuel filter.
There is also one other possibility, that the timing belt snapped. You would need to remove the timing cover to check this.

Feb 05, 2010 | 1995 Chrysler LHS

1 Answer

Car cranks but wont start


if no codes or check engine light try spraying with starter fluid if starts or ignites u have spark /no fuel check fuses and relay for fuel pump -check fuel filter fuel pump fix or replace parts -no spark but have fuel check distributor wires and plugs coil

Oct 14, 2009 | 1998 Chevrolet Camaro

2 Answers

1989 Cutlass wont start


the filter on fuel pump might be clogged as well or fuel pump needs replaced

Oct 01, 2009 | 1989 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...