Question about 2004 Ford E150

1 Answer

2005 f150. Suddenly hard to crank. Pumping accelerator while turning over helps.2nd day engine light finnally came on.code read injector 5 open.while truck is running removing gas cap makes it shut off?canged air filter,fuel filter, no change.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi , You should'nt have to pump accelerator.Change your fuel filter 1st, and yes your gas cap has to be on to keep fuel pressure where it should be. Sounds like your fuel pressure regulator is Faulty.

Also need to check your #5 injector Pulse with a node light to make sure its working right. You can buy the test light at parts stores.Also check and make sure your getting Spark to your plugs.

If it tested that #5 injector was bad then you'll need to get a new injector if the Pulse Test Fails.

Its possible that it could be dirty or Plugged.I would go ahead and check ALL your Injectors just to make sure they Pass the Pulse Test.

Please let me know how my solutions has helped you,by voting.

Thanks for using FixYa From d_hubbs


Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine turns over, car won't start


Engine Cranks But Wont Start - Professional Mechanics ...

www.2carpros.com/articles/car-cranks-but-wont-startJul 15, 2015 - Step 1 - A fuel pump operation failure will cause the engine to not startdue to ... The power distribution center of a vehicle houses fuses which .... Works atCVS ... I have a 1991 ford f150 the motor turn over fine but it won't start.

Car won't start - check VSC light - Club Lexus Forums

www.clublexus.com/.../is.../519132-car-won-t-start-check-vsc-light.html
Aug 13, 2010 - Car won't start - check VSC light IS - 2nd Gen (2006-2013) ... Carmakes an exaggerated version of the engine startup noise. Hard to describe the noise, but the one that sounds like .... It stopped accelerating, the VSC check & check enginelights came on. I immediately pulled over. Waited a few minutes.

Nov 22, 2015 | Cars & Trucks

1 Answer

2005 Wrangler Unlimited. Why does it die suddenly?


Please Help! 2005 Jeep Wrangler Engine Suddenly Stops While ...

www.wranglerforum.com/.../please-help-2005-jeep-wrangler-engine-sud...
Oct 11, 2009 - 30 posts - ‎17 authors ... suddenly stopped on my 2005 Jeep Wrangler TJ while I was driving. ... 20 seconds later, engine suddenly died exactly as it did last week. electrical problem? shuts off while driving
18 posts
Sep 29, 2012
Sudden loss of power
11 posts
Mar 9, 2012
Speedo not working and dies randomly
10 posts
Dec 4, 2011
won't start, won't crank
30 posts
Nov 20, 2011
More results from www.wranglerforum.com

Aug 11, 2015 | Jeep Wrangler Cars & Trucks

1 Answer

2000 ford 4.0 explorer cranks but fails to start. It acts like it starts after sitting all night but then only cranks, what is wrong?


Check for spark to the sparkplug. Try a shot of starting fluid as having gas pumping and having the fuel injectors opening are 2 different things. If you have spark, then the fuel injectors may not be working. Quick diagnosis is to use starting fluid and see if engine tries to run. This indicates problem is not lack of spark but lack of fuel getting into cylinders.

Sep 18, 2014 | 2000 Ford Explorer

2 Answers

How do I fix this starting problem?


first buy a new sparkplugs replace the old and start the engine.
second check ignition coil if it produces spark , you can buy a cheap ignition coil tester at ebay.
third check your fuel injectors maybe they are dirty. fast solution buy a fuel injector cleaner that is added to the fuel tank.
hope this can solve your problem

Apr 30, 2014 | 2005 Chevrolet Impala

1 Answer

Driving my bmwz4 2005 auto suddenly no power. After stop then it starts again in about 5 minutes. Am desperate please help!!!!


Does the Check Engine or Service Engine Soon light come on? If so, there is an error code stored in your car's onboard computer. This code can be read and interpreted to provide a starting point for troubleshooting the problem. If no light, I would suspect bad gasoline (water or contaminants in fuel), loose wiring to the fuel pump, clogged fuel injectors or fuel filter, or an ignition electrical problem. Without additional information, it is very difficult to diagnose. If the Check Engine or Service Engine Soon light illuminated, take your car to a larger auto parts store and ask the counterperson to read the error code with their diagnostic scanner. They can interpret any code and advise what corrective action(s) may be required. Good luck.

Oct 08, 2013 | Cars & Trucks

1 Answer

Check engine soon light P0275


Code P0275 is triggered when the Power Train Control Module (PCM) detects that the acceleration rate of the crankshaft for Cylinder #5 was less than a calibrated amount. During normal conditions the PCM turns the Fuel Injectors ON and OFF in the Fuel Injection System.
check the following:
plug wires fuel injector fuel injector connector
Try cleaning the injectors before replacing them.

Feb 03, 2011 | 2005 Nissan Altima

2 Answers

Check engine light on 1998 Z3 BMW


BMW engine light

Comes on if DME engine management system self diagnostic fault detected. Will stay on until codes are called up and memory erased.

With OBD read the code as follows. Turn on ignition key, press accelerator pedal to the floor five times within 5 seconds. The check engine light will remain on for 5 sec , blik off, come on for 2,5 sec, go off for 2,5 sec and fault code will begin to flash. If more than one fault exist 2nd fault code will be separated by 2,5 sec pause. after fault codes there will be a 0.5 sec flash and light will remain off. to read codes again do procedure again.

Canceling of codes. make sure fault code is present (short blink and light goes out for long period), depress throttle pedal for at least 10 sec. read fault codes again and check for code 1444 (no faults stored.)

Check also the following, fuel pump, oxygen sensor, fuel injectors, engine coolant temp sensor, idle speed control valve, mass airflow sensor and too many other things.

Jun 16, 2009 | 1998 BMW Z3 Roadster

3 Answers

The engine light recently came on and now the engine spurts at acceleration.BMW328


when the engine light comes on the defect on the engine can be a blocked exhaust system or an air leak to the manifold. the oxygen senser monitors the runnig condition of the car and will inform you that the engine is not run correctly. diagnostic can tel you the defect

Jun 13, 2009 | 1997 BMW 328

4 Answers

Missing and stumbling during acceleration


4.2 ltr missing. 2000 truck, f150. Changed plugs, wires. Ran great for 2 weeks. Started again. Changed coils. Got worse. Changed fuel filter, did nothing. Added injector cleaner and fuel cleaner, nothing. Checked EGR, o.k. It is getting worse. Had new gas about the time it all started.

Feb 07, 2009 | 2000 Ford F150 Flareside SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...