Question about 1999 Honda Accord

1 Answer

Exterior, rear, passenger door handle will not open door. Handle feels loose, as though it is detached from any linkage?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

You will need to remove the panel, usually for screws located on arm rest,door handle and sometimes around the middle of the panel behind a round plastic cover. Once all the screws are out the panel pops off, you will need to disconnect the power switches from the inside. Then look at the inside of the door, there is a retaining clip that holds the lever inside the door handle it may have fallen off or the handle cracked. Hope this helped tim

Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Jetta Passenger Door is stuck closed


sounds like the linkage came apart on the inside of the door. Remove the inner door panel & u will see the linkage probably disconnected. find out where its disconnected & reconnect it. there may be a clip which holds it together which u may find in the bottom of the door.

Aug 10, 2017 | 1997 Volkswagen Jetta

1 Answer

Thank you for your response , been going crazy here...got panel off enough to put hand in but don't know where to pull to unlock door.



Jaguar 2000-06 - Locks & Lock Systems
Power Door Locks - Removal & Installation

Door Lock Switch
Door Lock Diagnosis & Testing

  1. Visually inspect the following:
    Misaligned door(s), hood or luggage compartment lid Door latches Actuating rod Exterior door handle Interior door handle Door lock cylinder Cable Luggage compartment lid exterior release switch Fuse(s) Wiring harness Electrical connector Door lock actuator Remote transmitter batteries Vehicle battery Remote transmitter Door lock switch Front electronic module
  2. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

Door Lock Motor
Coupe And Convertible
  1. Turn ignition key to position II.
  2. Motor door glass to fully raised position.
  3. Turn ignition key to position O.
  4. Disconnect the negative battery cable.
  5. Remove door casing for access.
  6. Remove door water shedder.
  7. Position PVC secondary water shedder for access.
  8. Slacken and remove the door glass rear runner lower securing screws.
  9. Reposition door glass rear runner. Mark the position of the glass rear runner upper securing screw.
  10. Slacken and remove the upper securing screw and move the runner away from the glass.
  11. Disconnect door handle and lock barrel (driver door only) operating rods from latch links.
  12. Slacken and remove the three latch assembly securing screws and position latch for access.
  13. Remove latch motor harness multiplug from mounting bracket and disconnect multiplug.
  14. Release operating cable from door handle. Move inner door handle to the locked position. Remove operating cable outer abutment from support bracket. Disconnect cable inner from door inner handle.
  15. Remove lock motor assembly from door.
  16. To install, reverse removal procedure.

    zjlimited_378.jpg

    Fig. Removing door lock actuator


Sedan
  1. Remove the door window glass
  2. Detach the interior door handle.
  3. Detach the actuator remote cable from the interior door handle.
  4. Remove the interior door handle.
  5. Detach the door window glass run.
  6. Remove the exterior door handle retaining screws.
  7. Remove the front door actuator retaining screws.
  8. Reposition the front door actuator and exterior handle.
  9. Remove the front door actuator and exterior handle.
  10. Disconnect the front door actuator remote cable.
  11. Detach the door lock cylinder connecting rod (1).
  12. Detach the exterior door handle connecting rod (2).
  13. Remove the front door actuator (3).
  14. To install, reverse removal procedure.

    zjlimited_379.jpg

    Fig. Removing door lock motor-Sedan



Hope this helps.

Dec 31, 2010 | 2002 Jaguar X-Type

1 Answer

I can only open the Front Passenger door from the outside. It will not open from the inside. I am talking about the front passenger door not the sliding door. It seems as though its not grabbing...


The linkage system, from the door handle to the door latch, is disconnected somewhere, or broken. The door panel has to be removed, the linkage system have to be inspected, any the faulty part has to be replaced, and riconnect the linkage to the door handle and the door latch.

Nov 14, 2010 | 2007 Honda Odyssey

1 Answer

1999 bmw 523i rear door will not open from outside


Your linkage inside the door is loose or broken free from the exterior handle. You will have to take the interior door panel off to solve the problem

Jan 25, 2010 | BMW 530 Cars & Trucks

1 Answer

The left rear passenger door exterior door handle will not open the door. The interior door handle does work. how do I repair it?


You will need to remove the interior door panel and inspect the linkages. The offending rod should be obvious and loose.

Jan 17, 2010 | 1993 Ford Explorer Limited

1 Answer

Need to remove inner rear passenger side door


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle

Nov 05, 2009 | 2006 Honda Pilot

1 Answer

Back door will not open from the inside


The linkage has most likely come loose from the back side of the inside handle or the handle where the linkage attaches has broken. You must pull out the interior door handle to know for sure. Might be as simple as putting the metal rod (linkage) back into the handle and securing it.

Oct 12, 2009 | 1997 Toyota Avalon

2 Answers

Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle


Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.

May 30, 2009 | 1997 Toyota Camry

1 Answer

Passenger door problem on 2001 chevy tracker


lock rods inside the door need to be attached and with exterior door handle broken, it will need to be replaced first. so the assembly will be complete

hope2help shack

Apr 18, 2009 | 2001 Chevrolet Tracker

1 Answer

Problem with passenger door handle (94-97 Accord)


the assy. that keep therod for openeing the door up is whats wrong worn out needs replacing , yu will have to take panel off to repair though good luck

Aug 03, 2008 | 2000 Honda Accord

Not finding what you are looking for?
1999 Honda Accord Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...