Question about 2006 Nissan Altima

1 Answer

When I place my car in drive it will not go forward, however if i treat it like a standard and manually shift the gears it will then catch and work until i put the car in park. What can be my problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,763 Answers

This can be caused by many thing in the trany, the first thing is to scan the computer for codes, the codes will point you in the right direction, also check the trany oil level to make sure its full,this may be cause by a bad seloniod or valve or even dirty trany oil, but start with the code check first, this is done with a scan tool, autozone parts store will scan it for free, just get the codes from them,hope this is helpful.

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car goes into reverse but won't go forward. What's the problem?


10 Most Common Transmission Problems

www.transmissionrepaircostguide.com/10-common-transmission-proble...
A similar type of thinking goes into diagnosing car trouble. ... response issue, but after shifting into gear the engine's RPMs will surge, but the car won't move ..... Can anyone please explain why my car cant go in reverse but can drive forward

My car will not go in reverse but will drive forward. What could ...

https://answers.yahoo.com/question/index?qid...
Dec 26, 2007 - My car will not go in reverse but will drive forward. ... I tried putting it in neutral and pushing it backwards, but something catches and it won't budge. ... Either way, it's likely that the transaxle is going to require removal and ... the hood and movethe linkage by hand, then it would shift into gear ok for awhile. Why won't my truck go forward, it only goes in reverse? ' Yahoo ...
Feb 23, 2014
My car won't go into reverse, still okay to drive a 2 hour drive ...
Jan 12, 2011
My car won't go in reverse but it will go forward with no problem ...
Feb 6, 2010
My car will drive forward, but not in reverse... Could this be a ...
Sep 11, 2007
More results from answers.yahoo.com

Dec 16, 2015 | Cars & Trucks

1 Answer

2003 Focus zx5 with a 5 speed manual. Yesterday after driving about 50 miles it became more and more difficult to push into all gears but would go if forced. Clutch worked and could drive it but could hear...


The transmission has synchronisers to help line up the gears when you shift from one gear to another. If this transmission has been treated rough or rawhided and speed shifted, these synchroniser clips become bent and turn up and won't allow the synchroniser to slid over them into place and hold the transmission in gear. Eventually you will have to replace them. You will notice if you take it easy when shifting, it will get easier. Don't get in a hurry and jam the shifter or it will just get worse and they will have to be replaced. I hope you better understand how your shifter work. I hope you can buy some time before you have to put a fair amount of money it to it.
Good Luck.

Feb 10, 2015 | 2003 Ford Focus

1 Answer

I got a 1990 ford tempo I was wondering why it goes in reverse but won't go forward


Is it standard or automatic, I think it must be Standard because that doesn't happen with Automatics. If you put it in low and it only goes backwards someone had it (The transmission apart) and put the slider in back wards or something like that. Perhaps the forward gears are gone so they wanted to see if reverse works. Maybe you meant when you shift into a forward gear it doesn't work but when you shift it into reverse it does work. There is a fork like gear that moves the gears in and out of high and low range and it might be broken and it is possible if you find it hasn't been ground up in the internal gears it might be welded back in place and be sure to grind off every bit of flux so the gears can work smoothly. Best thing is to go to a junk yard that still has older cars like the Tempo so you can buy the transmission.

Dec 08, 2014 | 1990 Ford Tempo

1 Answer

Lost forward gears


You have lost the 1st, 2nd, etc. in DRIVE? If you put the car in SECOND does it move forward a little bit? Put the car in Manual 2nd, can you shift into DRIVE and feel the third gear? This happened to me. The 'forward clutch' needs replacing. The transmission clutch plates in that part are glazed over because the fluid is burned. See if your fluid is brown.

Mar 11, 2014 | 2001 Mazda Tribute

1 Answer

Standard...car acts like it is not in gear


what car what year & what will catch??????

Mar 06, 2014 | Cars & Trucks

2 Answers

Buick rendezvous gear shifts just fine but car won't move. No grinding shifting is smooth and flawless vehicle just will not move forward whether it is in drive, 1st, 2nd, or third gear. Reverses and


Sounds as if forward driving gears are shot. Different gears make vehicle move in reverse. I would ask if transmission fluid level when checked is in the operation range or full.

Nov 07, 2013 | Cars & Trucks

2 Answers

My 92 Ford Taurus has had shifting probs for about 5yrs, but recently it wouldn't catch any gear to move forward, and severely "bucked" in reverse. Mechanic says it might be speed sensor,...


Some speed sensors will help the transmission know when to switch gears, but with some of the things you describe, sounds like after driving it that long, damage to the transmission has occured. Also, it could be a bad torque converter. There is also something called the transmission torque converter clutch solenoid, causes the car to buck and cut off. Hope this helps, any questions just contact me.

Jun 10, 2011 | 1992 Ford Taurus

5 Answers

1997 Chevy 4L60e Transmission Shift Problem


How many miles? Have you maintained, serviced trans in past or just waited for this day to wonder what happened?

Jan 04, 2010 | 1997 Chevrolet Suburban

1 Answer

3 speed transmission won't catch drive (88 Beretta GT)


Forward sprag is not holding, will need major repair work.

Feb 16, 2009 | 1988 Chevrolet Beretta

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...