Question about 2001 Saturn SL

1 Answer

Have a code PO44o on 2001 saturn sl2 replace the gas cap and the purge selenoid can that be the filter air o what else could be the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,190 Answers

Hello this symptom could be caused by a malfunctioning evaporator purge valve. The fuel cap is it a aftermarket brand or did it come from a GM dealer? I have experienced aftermarket fuel caps. Please keep in mind the evaporator test does not run if the fuel level is below 15% capacity or above 85% capacity, The 2001 L 200 has a 15.7 gal. fuel tank

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 1997 Saturn SC2 have a cabin air filter


The Saturn S-series (SL1, SL2, SC1, SC2, SW1, SW2) were not designed with cabin air filters, thus do not have them. There is no cabin air filter to replace.

Apr 22, 2012 | 1999 Saturn SL

1 Answer

Evap emission failed what is this


It's an emission control related problem, there is a leak in the fuel vapor recovery system and could be caused by a number of things, the most common are a vapor hose off at the air filter so check the air filter hose connections, it's common for the evap system purge hose to be disconnected from the air filter, next is a gas cap that is not sealeing, try replacing the gas cap with an OEM grade gas cap, then disconnect the negative battery cable for ten seconds, this clears the codes, wait and see if the check engine light comes back on and which codes came back.

Mar 23, 2012 | 2001 Toyota Highlander

1 Answer

Code po44o for a chevy s-10 pickup


this is a evaporative emissions code. which means there is a leak in the piping or something leading to the gasoline tank that is allowing fuel vapors to escape. More often than not the gas cap isn't tight or needs to be replaced. try these first

May 08, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

Engine light on diagnosed PO44O dodge said probably the purge control solonoid. where is this located on a 2004 dodge neon?


Try checking the gas cap first off. 95% of the time, an EVAP code, (purge solenoids, or any EVAP code) could be caused by a lose gas cap, or a defective gas cap.

And I know on SOME neons, the evap canister purge solenoid is located on a bracket attached to the air cleaner. Hope this helped.

Feb 25, 2011 | 2004 Dodge Neon

1 Answer

Code po44o


this is a evap system leak code. have you checked gas cap to make sure it is tight? if so it is probably the vent solenoid hanging up.

Feb 22, 2011 | 2001 Chevrolet Cavalier

1 Answer

Ongoing P0441 purge code on 2003 PT Cruiser GT. I


if you have replace the purge solenoid the problem is either the vaccum supply hose is loosing vaccum or the purge side is hose is either blocked or cracked.

Apr 21, 2010 | 2003 Chrysler PT Cruiser

2 Answers

Small evap leak


this could be due to a cracked line for the evap or a bad vent valve or bad purge valve, check all the evap lines closely for cracks, this would be better with an evap machine, you would be able to smoke test, this is done by filling the evap system with smoke in order to test for a leak, if it passed the smoke test then the next thing is to test the vent valve to make sure it closes good, this is done with the smoke and by powering the valve shut,and making sure it doesnt leak, most saturns i work on end up with bad vent valves or a cracked line, hope this helps.

Apr 17, 2010 | 1999 Saturn SL

1 Answer

I have a saturn sl2 1996,,, it is hard to start i


fuel, oxygen, and spark. Check all of these. Is it getting air. Is your filter clean. Are you getting spark. if not check your plugs wires and coil. finaly check your fuel. Are you getting enough fuel. Replace the filter, make sure you are getting enough psi's before the injectors. also make sure the fuel pump is working.

You will probably need to put your car on a computer scanner.

Let me know what you find.

Mar 20, 2009 | 1993 Saturn SL2

1 Answer

2006 saturn ion 2.2L engine code came up for EVAP purge/vent


replace your pvc vavle then have your cars underbody washed

Mar 15, 2009 | 2004 Saturn ION

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...