Question about 2003 Hyundai Tiburon

1 Answer

Well clutch was slipping so changed it no joy changed slave cylindar and still slipping changing the master now as thats all of it changed. if that doesnt work any ideas to how to stop clutch slipping

Posted by on

  • devilman1000 Sep 06, 2010

    already replaced the clutch tho dude and its still slipping

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 8,582 Answers

Clutch slipping is clutch itself. Caused by wear of disk and springs. Remove transmission and replace clutch...:-(

Posted on Sep 06, 2010

  • Jeffrey Turcotte
    Jeffrey Turcotte Sep 06, 2010

    Did you replace the clutch spring or just the disk?

  • devilman1000 Sep 16, 2010

    replaced clutch put brought a new clutch kit from hyundai and put it in also new slave as well problem still there

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 saturn ion hpw do I change the clutch is it a kit or seperatly ? like the slave and master drive or cylinders and how do I kmo w for sure that its that tthat needs to be changed


if you gave some indication of the problem of the clutch maybe we could help
was the clutch master cylinder replaced because that is one of the main reasons clutch will slip

Jul 13, 2017 | Saturn Cars & Trucks

2 Answers

Hyundai. Tucson, 59 plate' clutch slips at high speed when changing gear


check /replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from overheated clutch)

Feb 10, 2015 | Hyundai Tucson Cars & Trucks

1 Answer

I have a 2000 mazda 323 with a manual transmission. i have already change the clutch kit but the gear is still hard to shift


Check the hydraulic clutch operation. This is a clutch master cylinder with a reservoir on the firewall, and a clutch slave cylinder down on the bell housing of the transmission, with a steel tube running from the master to the slave cylinder. When clutch pedal is depressed, hydraulic fluid (brake fluid) is forced from the master to the slave. The slave cylinder should push out a little plunger that contacts the clutch fork lever-pushing it forward to engage the clutch.
Add brake fluid to the reservoir if needed. Watch the plunger on the slave cylinder: if it moves little, or not enough, try bleeding the slave from the bleeder valve. They are bled just like brakes. If bleeding doesn't help, your clutch master or the slave may need replacing. The master cylinder, like a brake master, has internal seals that hold hydraulic pressure, so force can be applied to the plunger on the slave cylinder.

Dec 09, 2013 | Mazda 323 Cars & Trucks

1 Answer

Trying to bleed clutch line in 1997 nissan pu xe 2wheel drive.\r\nhave removed old fluid and removed and overhauled master cylindar. refilled lines and resivour with brake fluid. clutch peddal has zero...


Explain this in some detail
You need a helper to bleed anything
My wife and I, have been bleeding brakes for 35 years, with no issues
I owned a trans shop once, and my employees did a few clutch master and slaves!

Dec 01, 2010 | 1997 Nissan Pickup

1 Answer

Do i need to change my clutch reservoir or clutch? problem is my clutch keeps going down and won't come back up.


If the clutch was not slipping before that happened, chances are pretty good that it's OK.
If the master is full then it may be internally bypassing If empty or low, check for leaks at the back of the master, the line to the slave unit and the slave itself. If there are no signs of leaking or seepage check all the mechanical linkage to make sure nothing broke.

Nov 06, 2010 | Honda Accord Cars & Trucks

1 Answer

1997 hyandai accent gt clutch problem


hi considering age of car and that you have no leaks on hydraulics? may i suggest you try bleeding the clutch to rid of old fluid a couple of pumps may be suffice ? b/fluid does absorb moisture and heat over time hence recommendation tat fluid be changed at period specified in handbooks ie 12 monthly ?

May 15, 2009 | 1994 Hyundai Excel

1 Answer

Master or slave cylinder...leakage?? lines..??


I am totally unfamiliar with the particular setup you have, however I know a bit about clutches, Sifting through what you said, it appears that your clutch is set up too tight. By this I mean that the throwout bearing is always pressing on the release diaphram (or fingers) on the clutch cover. As you drive this is causing the clutch disc to overheat and slip. The repeated bleeding you are doing likely has no effect on this other than that the time you spend bleeding is allowing the clutch assembly to cool off. If the slave cylinder is part of the throwout bearing and is inside the bellhousing you need to remove it and get one that is slightly shorter. If the slave is mounted on the bellhousing and activates a clutch fork that moves the bearing you will need to find a means of backing off the slave adjustment so there is a bit of freeplay between it and the fork. likely since you can drive it you are looking at 1/4" or less play to get it right. My only concern would be that you may have overcentered the fingers on the pressure plate and damaged the return spring. slipping the clutch also has not done good things to the disc either. (like driving down the road with your foot on the brake is not good for brake pads)
Good luck with your project !!

Mar 22, 2009 | 1995 Honda Accord

2 Answers

1998 saab 9000 clutch issues


when you say you've lost resistance does the pedal stay to the floor or does it spring back up?

Mar 01, 2009 | 1996 Saab 9000

1 Answer

Clutch not disengageing on 1996 jeep cherokee


There has to be a bleeder there unless someone broke it off. If so, your best option is to replace it. In order to be malfunctioning, there has to be a reason. Air just does not enter the system by itself... Either the clutch master, slave cyl or a line between the two is bad, or the clutch itself is worn. Check everything carefully before deciding upon a repair plan.

Jan 12, 2009 | 1996 Jeep Cherokee

3 Answers

1999 Dodge Ram


Your pressure plate is going out.
Please Rate this !

Jul 07, 2008 | 1999 Dodge Ram

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...