Question about 1988 Dodge Colt Hatchback

Open Question

Where the timing marks for the camshaft on a 1987 dodge colt with a 4g32 1.6L sohc engine?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 37 Answers

SOURCE: Parts sources for mitsubishi 4g32

some dealers should still have the old paper bound tune up books laying around - otherwise its on microfische, but thats a real longshot to find a dealer who still has one of those!! you'll just have to call dealers in your area - good luck!!

Posted on Jan 11, 2009

  • 10 Answers

SOURCE: car stopped running on highway and wouldn't

you should check engine compression if you can. its possible you have a bent valve.

Posted on May 19, 2009

motor1258
  • 6674 Answers

SOURCE: timing marks for my 87 dodge ram 50 2.0

8 degrees BTDC.

Posted on Jul 26, 2009

motor1258
  • 6674 Answers

SOURCE: tire size for 1987 dodge colt

Check door sticker if still visible but I believe they were, P175/70/13

Posted on Aug 06, 2009

motor1258
  • 6674 Answers

SOURCE: camshaft timing mark crankshaft timing mark

Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

Posted on Oct 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need my 1987 Plymouth colt firing order, i lost my repair manual.... Thanks...


Hi, this is the firing order for your 1987 Plymouth Colt 1.5 liter SOHC L4 VIN "K"


zjlimited_369.gif


1987 Plymouth Colt Vista 2.0 liter SOHC L4 VIN "D"

zjlimited_370.gif

I got it from your Car repair manual.........

May 30, 2011 | 1987 Plymouth Colt

2 Answers

I NEED THE FIRING ORDER FOR A 1987 PLYMOUTH COLT


1987 Plymouth Colt 1.5 liter SOHC L4 VIN "K"
or
1987 Plymouth Colt 1.6 liter Turbo DOHC L4 VIN "F"

zjlimited_369.gif


1987 Plymouth Colt Vista 2.0 liter SOHC L4 VIN "D"

zjlimited_370.gif


Hope this helps (remember to rate and comment this answer).

May 05, 2011 | 1987 Plymouth Colt

2 Answers

How do I replace the CAM sensor on a 1996 dodge neon?


Hi, my name is John I will do my best to assist you.

To Remove
  1. Disconnect the negative battery cable.
  2. Disconnect the filtered air tube from the throttle body and air cleaner housing.
  3. For SOHC engines, remove the air cleaner inlet tube.
  4. For SOHC engines, detach the electrical connectors from the engine coolant sensor and the camshaft position sensor.
  5. For DOHC engines, unplug the electrical connector from the camshaft position sensor.
  6. For SOHC engines, remove the brake booster hose and the electrical connectors form the holders on the end of the cylinder head cover.
  7. Unfasten the camshaft position sensor mounting screws, then remove the sensor.
  8. Loosen the screw/bolt attaching the target magnet to the rear of the camshaft.
To Install: NOTE: The target magnet has 2 locating dowels which fit into the machined locating holes in the end of the camshaft.

  1. Install the target magnet in the end of the camshaft. Tighten the retainer to 30 inch lbs. (3.4 Nm).
  2. Install the camshaft position sensor. Tighten the sensor mounting screws to 80 inch lbs. (9 Nm).
  3. For SOHC engines, place the brake booster hose and the electrical harness in the holders on the end of the valve cover.
  4. Attach the electrical connector(s) to the camshaft position sensor and coolant temperature sensor (if necessary).
  5. Install the air cleaner inlet tube and the filtered air tube.
  6. Connect the negative battery cable.
The camshaft position sensor is mounted to the rear of the cylinder head - SOHC engine shown


tecnovative_139.gif
Location of the camshaft position sensor - DOHC engine shown

tecnovative_140.gif

Unfasten the retaining bolt, then remove the target magnet from the rear of the camshaft - SOHC shown, DOHC similar

tecnovative_141.gif

The target magnet has 2 locating dowels for proper alignment during installation

tecnovative_142.gif

Feb 20, 2011 | 1996 Dodge Neon

1 Answer

How to check if timing belt slipped a tooth


Remove top timing cove, turn crankshaft be hand (using tools) to TDC, and check timing mark on camshaft, here's diagrams for camshaft timing mark's 2.0L SOHC and DOHC, hope this was very helpful.


5927932.gif3a5c129.gif

Aug 30, 2010 | 1996 Dodge Neon

1 Answer

Blew timing belt on 1994 dodge colt. Where are the timing marks on the gears.


Click on the following: direct, free Link. It has the Timing Belt Marks for your 1994 Dodge Colt; with the unspecified 1.5L or 1.8L SOHC In-Line 4-Cylinder Engines.
After looking at the Diagrams, if you are having a problem with locating the marks on the Cam Sprocket LOOK at the Camshaft Key location at the center of the Camshaft Sprocket Bolt in relation to where the Mark should be.
There are several additional diagrams on the Link Page which will be help you in your endeavors.

Let me know if this helped.

http://www.2carpros.com/car_repair_information/year/1994/make/dodge/model/colt/1994_dodge_colt_timing_belt_diagram_marks.htm

May 05, 2010 | 1994 Dodge Colt

2 Answers

Is there 2 timing marks on each cam gears one is mark on the middle on the tooth and the other one on the side of the tooth 2001 dodge stratus 2.4 4 door?


Click on the following direct Free Link. It has the correct Timing Belt Diagrams, including the one for the 2.4L. Scroll down that Page to the Diagram with the 2.4L Camshaft Timing Marks. As you can see there is a 1/2 notch difference. There are also additional Diagrams that will be very useful to you. I've worked alot on the 2.4L and trying to line these up 'perfectly' can cause problems.
Note: That Link Page contains: the 2.4L SOHC, 2.4L DOHC, 2.7L DOHC, and the 3.0L SOHC Engine Diagrams.
http://www.2carpros.com/car_repair_information/year/2001/make/dodge/model/stratus/2001_dodge_stratus_timing_belt_diagram_marks.htm

Apr 07, 2010 | 2001 Dodge Stratus

1 Answer

Tranmission


1987 dodge colt 1.5L engine automatic gears won't work just stopped with reverse at the store and now won't go into any gears at all.what is this problem?

Apr 20, 2009 | 1991 Dodge Colt

1 Answer

I need to know timing alignment mark to align camshaft on 91 Toyota Tercel with SOHC 3E engine.


the camshaft has a pin on the pulley side that should be at the 12:00 position and the #1 piston valves should all be closed.

Jul 28, 2008 | 1987 Toyota Tercel Liftback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...