Question about 1995 Ford Contour

Open Question

How do I replace front struts on a 1995 ford contour

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fastboyz
  • 674 Answers

SOURCE: wheel bearing ford contour

this comes a a hub assembly
you need to remove the brakes and brake rotor
the center nut holding in your CV shaft
in the hub you will find holes that you can put your socket threw to remove the mounting bolts.
07ae802.jpg

Posted on Oct 18, 2008

  • 337 Answers

SOURCE: 1995 ford contour / passengerside wheel bearing

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800a8e08

Posted on Dec 07, 2008

SOURCE: I have a Ford Taurus 2003 SES that needs new front and rear strut

you will need sockets and a socket wrench, a screwdriver, jacks and jack stands, and a set of combination wrenches.

also this site should help, it's a very thorough step by step on strut removal

Posted on Jan 30, 2009

bunnydawg
  • 5158 Answers

SOURCE: 1996 Ford Contour 2.5l V6 how to insert front strut into knuckle

either put a jack under the strut (if you can do so safely and raise the strut or use a good pry bar to pull down on the A arm. make 100% sure the car is well supported with jack stands etc.

robert

Posted on Sep 09, 2009

  • 1024 Answers

SOURCE: how do you remove a rear strut from a 1995 ford.

there is a tool to compress the spring.
you need to be very careful working on this job
you can get hurt very easy

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What will it cost and is it a hard job to fix a leaf spring ( rear right side) that is bent on a ford contour 2000?


The suspension on Ford Contours (all years) is what is called a "strut" suspension, on both the front and rear, and DOES NOT USE LEAF SPRINGS! Instead, the shock absorber is built into a "strut" that is the main vertical suspension component, and has a coil spring around it. If someone has told you your Contour has a "bent leaf spring", they do not know what they are talking about, or they are trying to scam you! Take your car to a qualified (and hopefully honest!) shop to get it checked out.

Jul 14, 2014 | 2000 Ford Contour

1 Answer

1996 ford contour loud humming noise and vibration from front wheels


You have a defective wheel bearing most likely, the noise sounds correct for that problem. have a shop drive it before you replace anything to confirm my guess.

Sep 26, 2012 | 1995 Ford Contour

1 Answer

1995 Ford Contour. Driving on a "hilly" road


Sounds like you have a engine mount / transmission that is going bad.

Sep 04, 2011 | 1995 Ford Contour

1 Answer

Does the 1995 ford contour have an OBD connection?


YEP LOOK UNDER THE HOOD IN THE ENGINE COMPARTMENT IN THE FRONT LEFT STRUT TOWER.YOU HAVE A DIAGNOSTIC TERMINAL.YOU CAN USE A SCANNER OR USE THE ANALOG VOLT METER WITH THE KEY ON ENGINE OFF.YOU NEED A MANUAL TO SEE HOW TO HOOK VOLT METER TO SELF TEST DIAGNOSTIC TERMINAL ON STRUT TOWER.BE EASIER TO USE CODE SCANNER WITH FORD HOOK UP ADAPTERS.

Oct 13, 2010 | 1995 Ford Contour

2 Answers

Where can I find a brake line diagram for 1995 ford contour.


You buy brake tubing at the auto parts store,and fabricate what your replacing.
Have to know, how to bend and flair tubing, and have the necessary tools.

Oct 06, 2010 | 1995 Ford Contour

3 Answers

How to fix ford contour code p0708


this code indicates a problem with the transmission range selected switch, this switch is on the transmission case where the shift cable attaches, when u select a gear it sends a signal to the computer control that u want lets say Reverse by sensing the range selector switch feedback, replace the switch will most likely cure the code, then clear the code and drive a few miles.

Jul 22, 2010 | 1995 Ford Contour

2 Answers

1996 Ford Contour 2.5l V6 how to insert front strut into knuckle


Use a pry bar of some type or a pipe to pry the control arm/knuckle assemply down untill you can line them up and get the bolt in.

Make sure you jack stands are poistioned away from any of the moving suspension parts, so they will not impair you moving it down.

Sep 09, 2009 | 1996 Ford Contour

Not finding what you are looking for?
1995 Ford Contour Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...