Question about Lexus Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove plastic studs from door closer. Unscrew three retaining screws. remove grab.
Unhook window winder retaining clip. Best done with small long-nose pliers. window winder retaining clip located inside plastic winder handle section. Will need to prise away winder handle from door slightly to expose clip. locate and gently pull clip from winder shaft.
unscrew door opener / lock assembly retaining screw.
gently prise lower trim retaining press studs from door. remove lower trim.
gently , from rear of door, pull upper trim from door and similtaniously prise upper trim press studs from door.
gently giggle door opener / lock assembly through upper trim . remove trim
gently with flat blade, peel off plastic dust sheeting.
access to inside off door is now possible.
Reassembly reverse of above
Posted on Feb 22, 2009
SOURCE: 1990 trofeo door panel removal
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Oct 19, 2009
Tips for a great answer:
Apr 30, 2016 | 2002 Kia Sportage
Feb 19, 2013 | Lexus ES Cars & Trucks
May 16, 2012 | 1990 Lexus ES 250
Jan 15, 2011 | 1999 GMC Suburban
Nov 26, 2009 | 2007 Dodge Caravan SXT Minivan New Cars
Oct 16, 2009 | 1990 Lexus ES 250
Mar 20, 2009 | 1992 Chevrolet Lumina
Dec 29, 2008 | 2000 Honda CR-V
Sep 18, 2017 | Lexus Cars & Trucks
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: