Question about 2001 Pontiac Bonneville

1 Answer

The ceiling of my 2001 pontiac bonneville sle has buttons by the sunroof that i can program for a garage door opener, how do i program it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Pontiac Master
  • 373 Answers

Your question is a couple months old, but I'll give it a shot anyway. I have a 2005 Bonneville. So I hope they are the same.
There are basically two different types of programming codes. Both methods of programming are in the Bonneville's owners manual. Assuming yoiu don't have your manual....
As I recall, for the newer "rolling code" openers...
Get your ladder out. There is a learning button on your opener, it could be on the back or maybe under a light cover.
Press and hold this learning button about 5 seconds(?), until the learning light is flashing(?).
Then press and hold one of the three buttons on your car for about 5-10 seconds(?), until it's light glows steady. It should be programmed.
For the older garage door openers, you can program it inside your car with one of your current remotes. Not sure exactly, but try holding the car button first, then the old remote.

Posted on Nov 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse or relay for the sunroof on my 2001 Pontiac Bonneville? Panels are under the back seat and hood, but can't locate correct fuse.


Hi Jennifer Vallet,

Third attempt...
(new Dell PC: Win10 + old retired XP guy (sorry)).

There is an entire module dedicated to the SUNROOF...
ALSO:
There is a pretty good FREE circuit drawing site...

BBB Industries (See below)
(registration required... obviously we are dealing with proprietary information (GM's)... see below... You won't regret it).

There are 25 service bulletins on your '01 Bonneville but NONE
are about the sun-roof...

Going thru the drawing I found FUSE PANEL, REAR
LEAD labelled "A6"... From a 20 Amp FUSE:

Both the fuse and the relay are called "RAF"...
Pulling either will accomplish the switch isolation you seek.

Hope this helps.

PART & RELAY are DEPICTED BELOW

http://www.rockauto.com/en/moreinfo.php?pk=98212&cc=1374689

More Information for ACDELCO D7065C

Free documents at BBB
BBB Industries Premium Alternators Starters Power Steering Products

http://www.rockauto.com/en/catalog/pontiac,2001,bonneville,3.8l+v6+supercharged,1374689,electrical,power+sunroof+actuator,1000359

More Information for ACDELCO 25708336

Jun 06, 2016 | 2001 Pontiac Bonneville SLE

Tip

2010 BMW 528XI Garage Door Opener Homelink Setup


**** >>> This setup I performed with my new 2010 BMW 528XI Garage Door Homelink and Chamberlain Garage Door Opener <<< ****

Chamberlain:
01. Power off or unplug the garage door opener motor power supply (which is mounted on ceiling of the garage) ;;;

02. keep the garage door opener transmitter in your hand (do not press any button at this time) ;;;

03. In your 2010 BMW 528XI Homelink button (which resides under rear view mirror) press the 1st and 3rd homelink button together for about 30-40 seconds (i.e., until the yellow light blinks fast) and when the yellow light next to the homelink button blinks fast release from pressing the (homelink) buttons ;;;

04. now hold the garage door opener transmitter closer (means within 2-4 inches) to the homelink button (either 1st or 2nd or 3rd) whichever you are planning to program to open the garage door ;;;

05. now press the garage door opener transmitter button and chosen homelink button (either 1st or 2nd or 3rd whatever you need) together ;;;

06. the yellow light (next to homelink button) initially may blink slowly but after few seconds (may be 10-20 seconds) will blink fast; once it started blinking fast release from pressing both garage door opener transmitter and homelink button ;;;

07. Now plug or power on the main garage door opener motor (which is mounted on garage ceiling) ;;;

08. On the main garage door opener motor (which is mounted on garage ceiling) press the "LEARN" button (once you press it may have yellow/orange color light; make sure the light is on) ; then within 30 seconds do the next steps #9, #10, #11 very carefully ;;;

09. go to your car and press the homelink button you programmed and hold it for 4 seconds and then release it --> 1st iteration ;;;

10. again hold the same homelink button you programmed and hold it for 4 seconds and then release it --> 2nd iteration ;;;

11. again hold the same homelink button you programmed and hold it for 4 seconds and then release it --> 3rd iteration ** important note; generally three iterations are not necessary; and steps #9, #10, #11 must be performed within 30 seconds ** ;;;

12. during one of the iteration you will hear "CLICK" sound one-time from Garage door motor (which is mounted on ceiling) and if you have light attached with it; it will blink once (** if you hear the CLICK sound and/or light blinks once**) then the particular homelink button is programmed ;;;

13. now press the programmed homelink button; the garage door will open or close (but always it will take 3 or 4 blinks in yellow light or 2-3 seconds before the garage door opens or closes and which is normal) ;;;

** Thats it, your 2010 BMW 528XI Garage Door Opener Homelink setup is complete ** ;;;

You can program rest of the homelink button the same way but following from the steps between #4 and #13 ;;;

Hope this steps will help you to program chamberlain Garage door opener in 2010 BMW 528XI Homelink. ;;;


** possibly the above same steps may work with other BMW 5-series cars homelink too (but I'm not sure) **

on May 29, 2010 | BMW 528 Cars & Trucks

2 Answers

How do I find the ac heat acuator on a 2001 Pontiac Bonneville sle.


How To Install Replace AC Heater Temperature Actuator ...

? 4:40
https://www.youtube.com/watch?v=mVP09M7hLB4
Jul 21, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/temperature-blend-door-actuator/i/1ahcx00293 ... How To Remove Install Door Chevy Monte Carlo Pontiac Grand Prix ...

GM Blend Door Actuator Repair (Saturn, Chevy, GMC, Buick ...

? 4:28
https://www.youtube.com/watch?v=fER3ZqnYLZg
Jul 11, 2014 - Uploaded by willmacneill
The procedure is the same for most GM blend door actuatorsfrom 1990-2013 (found in many vehicles made by Chevy, GMC, Buick, Pontiac, ...

Mode/Temperature Door Actuators May Fail : Pontiac ...




Jan 16, 2016 | Pontiac Cars & Trucks

1 Answer

Fuse box located on a 2004 pontiac bonneville sle


On this website you find fuse box diagram and description for Pontiac Boneville (2004)



Pontiac Boneville 2003 2004 fuse box diagram Auto Genius

Nov 18, 2012 | Cadillac DeVille Cars & Trucks

1 Answer

How to program a garage door opener in a 2007 Acadia


Grab the remote for the garage door you want to program, then pick a button you want to match the door, next is turn key on push button on the truck and then button on the remote, hold both buttons until flashing red light turns green. you can do this with each button and each remote.

Mar 02, 2012 | 2007 GMC Acadia SLE

1 Answer

I have water getting inside when it rains on the back floor its a 2002 pontiac bonneville is ther any way to fix it when i go to car wash it leaks in


I'm assuming the vehicle has a sunroof, if so you'll need to be sure there are no obstructions like leaves or small sticks keeping the sunroof from completely closing. If the sunroof is closing properly it may be time to replace the weather stripping seal around the sunroof to get the leak stopped. Please rate this answer, thanks.

Feb 01, 2011 | 2001 Pontiac Bonneville

1 Answer

1998 Pontiac Bonneville SLE will turns over but will not run


I would check to see if the spark plugs are fouled. Or you might have a bad ignition control module (mounted under the coil packs). Auto Zone can test the ignition control module.

May 19, 2010 | 1998 Pontiac Bonneville

1 Answer

Service engine soon light has been on for two weeks in a 2001 pontiac bonneville sle


Hi,read your car service manual,it will show you how to reset service engine light.
good luck!!!!!!!

Feb 24, 2010 | 2001 Pontiac Bonneville

1 Answer

Program Garage Door Opener Button


Refer to car owner manual see homelink section i think p. 129-130

Jun 08, 2008 | 2002 Pontiac Bonneville

Not finding what you are looking for?
2001 Pontiac Bonneville Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...