Question about Ford Explorer

2 Answers

Transmission removal pictures for a 1996 ford explorer..i need to know how many bolts there are to remove the transmission from the motor

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Dimitri; If the Explorer is a 1996, it will have a 4R55E transmission. 1997 and up is 5R55E transmissions, 1995-1996 is the 4R55E, the 4R70W is on the 2002 and up, and the A4LD is on the 1991-1994 Explorers. Just an FIY

Posted on Apr 09, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 24 Answers

4x4 has seven transmission-to-engine bolts
4x2 has six transmission-to-engine bolts

You need to tell me though if this is an automatic or manual and 4x4 or 4x2 There are 3 different auto trannys: 4R44E, 4R55E then A4LD and 4R70W

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to remove the pannel cover on the rear hatch door I can get to the rear wipper motor


449b69b.jpg

Exploded view of the Explorer/Mountaineer rear liftgate trim panel (click for zoom)



Rear Window Wiper Motor


b5927f1.jpg

Fig. : Rear wiper motor assembly and related components

  1. Disconnect the negative battery cable.
  2. Remove the wiper arm and blade.
  3. Remove the liftgate interior trim.
  4. Remove the motor attaching bolts (3). Disconnect the electrical leads.
  5. Remove the wiper motor from the vehicle.
To install:
  1. Install the wiper motor in position and connect the electrical leads.
  2. Install the liftgate trim. Connect the negative battery cable.

I hope helps (remember to rate this).

Oct 11, 2010 | 1996 Ford Explorer

1 Answer

How do I remove a transmission from a ford


You can got to autozone dot com and register for free for a free online repair manual.

You will need to disconnect the negative battery cable, then disconnect solenoid by unclipping it, then remove any vacuum hoses and the linkage rod. Remove bottom support bar, place a tranny jack underneath the vehicle, have a helper loosen the bolts and set it down.

Mar 19, 2010 | 1996 Ford Explorer

2 Answers

HOW TO DISCONECT THE TRANSFER CASE ON A 2002 FORD EXPLORER 6CYLS


remove the front and rear drive shafts and remove the bolts from the transfer case around the transmission the transfer case will then slide backwards and off of the transmission

Feb 09, 2010 | 2002 Ford Explorer

1 Answer

How do i get the transmission out and put a new one in on a 1996 ford explorer


Disconnect the transmission bar from the differential and pull it out from the transmission. The secure the transmission with a jack (is heavy) remove the cables and wired attached to the transmission. The remove the bolts from the engine and drop it to the ground. Installation is reverse of removal. Is not a difficult job, is just time consuming.

Aug 14, 2009 | 1996 Ford Explorer

1 Answer

I cracked my oil pan and i need to know if i need to take out my engin to change it i'm low on cash i need help


here's v6 3.8L

Section 03-01A: Engine, 3.8L 1996 Thunderbird, Cougar Workshop Manual
IN-VEHICLE SERVICE Oil Pan/Oil Pump Screen Cover and Tube Removal
  1. Disconnect battery ground cable (14301).
  1. Remove air cleaner outlet tube (9B659). Refer to Section 03-12 .
  1. Remove two bolts retaining radiator upper sight shield (8C291) and position radiator upper sight shield aside.
  1. Remove hood weather seal.
  1. Remove windshield wipers.
  1. Remove LH cowl vent screen and wiper module.
  1. Install Three Bar Engine Support D88L-6000-A or equivalent.
  1. Raise vehicle on a hoist. Refer to Section 00-02 .
  1. Remove front engine support insulator through-bolts.
  1. Partially lower vehicle.
  1. Raise engine and support with Three Bar Engine Support D88L-6000-A or equivalent.
  1. Raise vehicle.
  1. Remove starter motor (11002).
  1. Position drain pan.
  1. Drain engine oil.
  1. Remove oil bypass filter (6714).
  1. Remove starter motor wire, ground strap and automatic transmission oil cooler lines.
  1. Remove oil pan-to-bell housing bolts and bolts at crankshaft position sensor lower shield.
  1. Remove remaining oil pan retaining bolts.
  1. Remove steering shaft pinch bolt and separate steering shaft.
  1. Position transmission jack under front sub-frame (5C145).
  1. Remove six rearward bolts on front sub-frame. Loosen two forward front sub-frame bolts.
  1. Remove lower shock absorber-to-front suspension lower arm bolts and nuts (both sides).
  1. Lower front sub-frame.
  1. Remove oil pan (6675).
  1. Empty any residual oil from oil pan.
  1. Remove oil pump screen cover and tube retainer bolts and support bracket nut. Remove oil pump screen cover and tube (6622) and discard oil pump inlet tube gasket (6626).

Apr 14, 2009 | 1996 Ford Thunderbird LX

2 Answers

What and where is the flex plate on a 96 ford explorer


between the motor and transmission... there is a gear on the outer edge of it that your starter drives to turn the motor. basically you will need to remove the transmission from the motor to change it.

Mar 26, 2009 | 1996 Ford Explorer

1 Answer

For gear shift removal to replace clutch


remove the nut from the stud and put it on the other end and when you tighten it up it will pull the stud out. when you put it back to together switch the nut back to where it was first and tighten it up to hold the shifter in place. I know it sounds screwed up but that is the way it works

Jan 02, 2009 | 1996 Ford Explorer

1 Answer

1996 ford explorer 4wd lights flash after transmission replacement


You need to test the selector motor at the trnasfer case, the connector might be disconnected or damaged, they had to remove this to remove the trans, so take it back to the guys (or gals) that did the work, have them check those items.

Jul 04, 2008 | 1996 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...