Question about 1995 Jeep Wrangler

Open Question

How do you bleed the clutch on a 1995 jeep wrangler

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
redbeard00
  • 957 Answers

SOURCE: how do i bleed the master clutch cylinder system on a 1995 jeep ?

A special pump is used to back bleed the system. If you don't own one then you have to be patient and just keep pumping the clutch pedal until it comes back. It can take a half hour to get it back. Just depents on how much air is inside.

Posted on Jun 16, 2009

Ad
  • 6982 Answers

SOURCE: clutch

Bleeder screw should be somewhere on the slave cylinder, generally somewhere above the centerline of the unit. (unless someone snapped it off. If that's the case, sometimes you can drill it out, but this takes a lot of skill mixed with some luck. (You can't damage the threads at all, and if you go too deep you will damage the sealing surface). Therefore better to replace it.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After changing transmission and clutch in 91 Wrangler, clutch goes to floor. Tried bleeding line but didn't work.


The clutch should go to the floor =) But if it's not disengaging the clutch disk, there's definitely a problem between the pedal and the clutch disk. I'm guessing you have a hydraulic clutch?

Apr 19, 2012 | 1991 Jeep Wrangler

1 Answer

Where do you bleed the clutch at on a 1997 jeep wrangler what is the location of it


This all depends if this is a hydraulic clutch or if its cable operated, you can only bleed hydraulic clutches, to bleed it you would bleed at the ******, you will see the bleeder screw on the slave cylinder that operates the clutch fork.

Sep 03, 2011 | 1991 Jeep Wrangler

1 Answer

My 1993 jeep wrangler clutch keeps giving out even after i bleed the line..any thoughts? it works fine for a little while then goes to the floor again


replace the CLUTCH MASTER and SLAVE assembly! Age of that classic jeep needs NEW CLUTCH MASTER and SLAVE! That part together w/ clutch slave should be change! Personally i have experience replacing the kit only, it didn't last longer than expected and even got me in trouble, and I spend like i bought a NEW one! So its up to you to decide? taaah!

Nov 10, 2010 | 1995 Jeep Wrangler

1 Answer

1995 Jeep Wrangler. Need instruction to bleed slave cylindar.


push in clutch release fluid , tighten back up release pedal , repeat

Aug 09, 2010 | 1995 Jeep Wrangler

1 Answer

How do i bleed the clutch slave cylinder on a 95 jeep wrangler


pump up clutch pedal really fast about ten times....leave it held to floor....open bleeder on slave cyl... repeat untill you have good pedal....may need to adjust master cyl. rod on clutch pedal to get more travel....good luck....Lee

Nov 06, 2009 | 1995 Jeep Wrangler

1 Answer

Problem going into gear


Your clutch system works the same as brakes do. The necessity to bleed tells you that there is a malfunction permitting air into the system. Check where the pedal rod goes into the firewall under the dash, the line itself, and the slave unit (some are inside the bellhousing...look for fluid dripping from bottom to verify if leaking) Not unlike brake master, they can also internally bypass. If you find no leaks, change master. Bleed system and you should be fine

Jul 11, 2009 | 1995 Jeep Wrangler

2 Answers

How do i bleed the master clutch cylinder system on a 1995 jeep ?


A special pump is used to back bleed the system. If you don't own one then you have to be patient and just keep pumping the clutch pedal until it comes back. It can take a half hour to get it back. Just depents on how much air is inside.

Jun 16, 2009 | 1995 Jeep Wrangler

1 Answer

Brake fluid seems to be full


bleed brake lines they have air in them

Mar 21, 2009 | 1993 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...