Question about 2005 GMC Yukon Xl Denali
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
Posted on Mar 16, 2009
Yes you do have to take it to the dealer, This is a common problem in these trucks. This is caused by a bad encoder sensor in the shifter on the side of the transfer case. The sensor can be replaced with out having to replace the shifter assembly.
THe best test is to get the code from the system. This sensor is a sliding resistor and the material wears off causing a false reading. That is why the lights were showing Nothing, but you were able to drive. The code for the sensor is C0327.
TBS: #PIP3480M: Rattle Drone Or Buffeting Noise At Highway Speed In 2WD Or DTC C0327 - keywords 246 2hi 2high 4WD auto awd buffet buzz case click indicator knock lamp light service tick transfercase transfer vibrati - (Mar 4, 2008) Vehicles involved were built approximately between 01/01/04 and 03/06/06. The noise condition if not noticed by the customer may cause eventual encoder sensor wear causing DTC C0327 set in the Transfer Case Control Module (TCCM).
An updated TCCM calibration has been released to apply light pressure to the transfer case clutch pack and reduce the rattle. The calibration was released on 3/18/07 and the title line will read "to correct transfer case rattle at highway speeds and possible DTC C0327". For Rattle only (no current DTC C0327 set), Install the updated calibration and if necessary follow the diagnostics listed below
If the vehicle has a current or history dtc C0327 and can be diagnosed to the encoder sensor, re-flash with the updated calibrations and replace the encoder sensor as necessary.
Important Note: All NV246 transfer cases built 02/25/06 and beyond are manufactured with pressed fit parts to help reduce the rattle. Inspect the ID tag on the transfer case for this build date and verify the tccm has the latest calibration before repairs are initiated.
Thank you fur using Fixya and good luck.
Posted on Apr 20, 2010
Testimonial: "Thanks, this was very helpful. Now I can take it to the dealer without sounding like a complete nutcase. Thanks again,"
Tips for a great answer:
Sep 17, 2012 | 2005 GMC Yukon
Aug 28, 2012 | 2005 GMC Yukon
Jun 07, 2012 | 2005 GMC Yukon
Mar 07, 2011 | 2005 GMC Yukon Xl Denali
Oct 07, 2017 | 2007 GMC Yukon Denali
Jul 14, 2009 | 2005 GMC Yukon Xl Denali
Apr 20, 2009 | 2005 GMC Yukon Xl Denali
Apr 03, 2009 | 2005 GMC Yukon Xl Denali
Mar 12, 2009 | 2005 GMC Yukon Denali
Jul 04, 2008 | 2005 GMC Yukon Xl Denali
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: