Question about 2003 Toyota Camry

2 Answers

The brake lights are not coming off on my 2003 Toyota Camry

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,763 Answers

This is due to a bad brake light switch, this is located above your brake pedal, you will see if you follow the arm of the pedal up you will see the switch, unplug the connector so the battery does not drain overnight,hope this helps.

Posted on Sep 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 222 Answers

Should have a button that is pressed when you release the brake on the pedal arm. When you press pedal it disengages button and light come on. There's a plastic/rubber piece that makes that contact and break off. Find button near upper brake pedal arm and you will see. I've fixed this by using electrical tape and neatly tape together two nickels. Then tape this to the same spot that would engage the button holding down pedal. Watch your finger.

Posted on Sep 05, 2010

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 1997 TOYOTA CAMRY BRAKE PROBLEMS

Check the trunk wire harness right by the left side trunk lid hinge for broken wires. This is a common problem on these cars. If the wires are broken you will have to repair them. The best way is to add short lengths of wires to the breaks and solder them back together. Use electrical tape to recover the harness.

Posted on Feb 01, 2009

  • 1861 Answers

SOURCE: 2003 Toyota Camry - Both Brake lights not working

Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".

Posted on Jul 16, 2009

  • 484 Answers

SOURCE: 1989 Toyota Camry. No brake lights.

It could be the relay, which is a yellow box located under the carpeting in the trunk on the left side. It is a problem common to your model. Also, check the brake switch's (behind the brake pedal) functionality (12V present with key at ACC or ON and continuity between wires when button engaged).

i hope this helps
-matthew

Posted on Oct 26, 2009

Testimonial: "Wow! I would have never found the problem without you guys. It was the relay located in the trunk. Thanks!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights don't work on a 2003 CAMRY LE


try changing the brake switch in the floor behind brake pedal.... pedal activates in when used, sending power to brake lights

Nov 30, 2012 | 2003 Toyota Camry

2 Answers

Toyota Camry V6 2003 with Check Engine, Trac Off and VSC lights on. Went to AutoZone and got code P0430. Can anyone assist with what to do next? Thanks in advance.


hey man sorry to tell you this but u will need a cat bank 2 its easy to take out it should only be 5 12mm nuts on the top and 2 14mm bolts on the bottom and some that r holding on to the trans.

Dec 13, 2010 | 2003 Toyota Camry

1 Answer

Does my camry sportivo 2003 model have low brake


yes, it will be a high pitch squeal when not using the brakes,when you use the brakes the high pitch quits,

Jan 21, 2010 | 2003 Toyota Camry

1 Answer

I have a 2003 Toyota Camry. The driver's side


check the seat belt reciever, sometimes the wiring brakes while noving the seat.. if so e-mail back

Sep 24, 2009 | 2003 Toyota Camry Solara

2 Answers

Brake light out both


the brake pedal switch is bad.
look under the dash were the switch for the brake pedal is.
change it out .

hope this helps
thank you
jm

Aug 26, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

2003 Toyota Camry - Both Brake lights not working


Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".

Jul 16, 2009 | 2003 Toyota Camry

2 Answers

How do I turn off my lights when I'm parked but car is still running


You don't. It's a safety feature so OTHERS CAN SEE YOU!!!!!!!!!!!!!!!!

Mar 07, 2009 | 2003 Toyota Corolla

1 Answer

Replaced rear brakes, Alarms still active


i have a 2003 toyota 4-runner my brake and abs vsc are on and it has a beeping loud noise.....what do u think is the problem?

Aug 21, 2008 | 2003 Toyota 4Runner

Not finding what you are looking for?
2003 Toyota Camry Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...