Question about 2001 Chevrolet Malibu

1 Answer

K&W NanoTechnology Permanent Head Gasket & Block Repair instructions please

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,763 Answers

First i will tell you ive tried it all from all manufactures, they left me samples and over 15 years never seen one that worked, heres the way to do this, first drain the cooling system, next remove the thermostant reinstall the housing without the stant so there are no leaks, next if to fill system with water add the sealer repair, top off system put cap on and let run for 1/2 hour with heat on low then drive car for 1/2 hour, always keep an eye on water level depending on how bad a leak, then shut car down . let cool. restart and drive to see if repaired then if repaired drain water out put thermostant back in and fill with 50/50 coolant and water. good luck hope this helps.

Posted on Sep 05, 2010

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do fix a leak on engine block?


How to Fix a Cracked Engine Block - BlueDevil Products

www.gobluedevil.com/blog/how-to-fix-a-cracked-engine-block/
Aug 9, 2015 - cracked engine block You may find out that your engine block is crack a few different ways. First you may notice coolant leaking externally.

K-Seal Fixes Head Gasket Leak Symptoms & Cracked ...

? 6:38
https://www.youtube.com/watch?v=D7pus6Xr41c
Jun 3, 2010 - Uploaded by MrKSeal
K-Seal is the 'Miracle in the Little Blue Bottle' that offers a quick, easy and permanent fix for cracked engine blocks ...

Cracked Engine Block - Will JB Weld Fix It? - YouTube

? 9:42
www.youtube.com/watch?v=vgnQmfiIo9k
Jun 27, 2013 - Uploaded by Donnie Smith Check out the reviews at http://amzn.to/1pEsb3o The engine block on ... As soon as the engine got hot the JB ..

Nov 04, 2015 | Cars & Trucks

2 Answers

How do i stop air bubbles in holding tank, they are constantly flowing and the car overheats


Blown head gasket or crack in a head or block ! Pull the sparks an see if any have coolant on them .

Oct 03, 2015 | 2000 Oldsmobile Intrigue

2 Answers

How do i change 1999 mitsubishi eclipse head gasket


Hi there, I'm Al the owner of Big As Auto Repair

If you've never changed a head gasket before and you do it wrong it can be very costly to you. Because if you fail to set up the timing correctly you can bend every valve in the head costing you big time money. BUT, if you are still wanting to do it yourself go to my website, click on "Contact Us" and give me all the information about you car. "Engine size, Make, Model, Year and VIN number and your name. I'll help you step by step, BUT, understand I will not be responsible if you miss a step and bend the valves, but if you listen carefully and follow instructions we should be able to get you through. It's up to you, my website is below. Have an awesome day! Auto Repair

Feb 16, 2015 | 1999 Mitsubishi Eclipse

2 Answers

Leaky head gasket


Not that uncommon on those 2.5L engines. Thje permanent fix is to replace the head gasket. Be sure and check cylinder head and the engine block deck for straightness to ensure a good seal with the new head gasket.

Jun 22, 2012 | 1994 Plymouth Sundance

1 Answer

Where is head gasket


Head gasket between the engine block and the head. It is a VERY big job to repair it, if you have the instructions, the parts, all the tools and a place to do it.

Mar 14, 2012 | 1990 Dodge Dynasty

1 Answer

How do you disassemble a head gasket for a 2004 toyota camery?


replacing a head gasket is a major repair and really should not be attempted if you dont have adequate knowledge and experince withthe process. That said, the head gasket is sandwiched between the cylinder head and the engine block. It requires removing everything from the top of the motor, then removing the cylinder head itself. The old gasket must be completely scraped off the head and the top of the block and any adhesive removed as well... The new gasket is placed on the top of the block in it correct place. Each side of the gasket must be covered with a thin coat of gasket compound. The place the head on top of the gasket, sandwiching it in between and replace the head bolts and torque them down to the required torque. Replace everything removed from top of motor in reverse order. Keep in mind that in replacing a head gasket, it is entirely possible that your problem may be the head itself instead of the gasket. While the head is off, take it to a machine shop and have them inspect it and if its needs it, have them repair it. Again . this is not a do it yourself job.

Mar 26, 2011 | Toyota Camry Cars & Trucks

1 Answer

What is the correct way to put a new head gasket on a d15b7 engine honda block?


By using a repair manual. Removing and replacing a
head gasket can be done but you need the step by step
instructions, which are numerous. Also try and buy
the parts from Honda. May come in a kit form.

Feb 07, 2011 | 1994 Honda Civic

1 Answer

Car keeps overheating. we got new radiator cap from the dealer, still too hot. Then we changed water pump and flushed system, still too hot. Then we called cadillac and spoke with service who told us it...


i have seen several cases where headgasket leak could not be found by compression test check for engine heating up rather quick as 600 degree gas is entering cooing system also die is sold that can be added to cooling system that changes color if mixed with combustion (keep in mind dealers are chomping at the bit to get a couple thousand dollar headgasket job) one other test is a cooling system tester put on the radiator crank the engine if gauge rises with rotation of engine suspect head gasket if not change radiator

Feb 18, 2010 | 1997 Cadillac Seville

3 Answers

Leaking head gasket


YES! Anti freeze can cause the pistons to sieze in the block & require major machining or wearing it to the point of needing more than just a gasket, you could end up needing an entire engine. The repairs need to be made immediately & the oil system will need to be flushed as part of the repair process if only the head gasket is replaced. good luck

Jan 30, 2010 | 2001 Volkswagen Passat

2 Answers

I found oil in my water reservoir what happened its a 97 saturn sl 2


Check your radiator, your transmission cooler is built in you radiator and is leaking in your coolant.I hope this helps you?

Oct 03, 2009 | 1997 Saturn SL

Not finding what you are looking for?
2001 Chevrolet Malibu Logo

809 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...