Question about 1992 Nissan Stanza

1 Answer

Cant find the Thermostat Housing Cover - 1992 Nissan Stanza

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 222 Answers

The thermostat housing is where the radiator cap is on most cars or very close. If you look at the top radiator hose it is usually connected to the housing, where the cap is and where this attaches is where the thermostat is.

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is thermostat on my 2005 chevy classic


Thermostat Removal & Installation 2.2L Engine 2004-2005 To Remove:
  1. Drain the cooling system. chevy_cav_02-04_tstat.gif
  2. Remove the thermostat housing-to-water pump feed pipe bolts. chevy_cav_02-04_feedpipe.gif
  3. Remove the water pump feed pipe from the thermostat housing .
  4. Remove the thermostat from the housing.
To Install:
  1. Install the thermostat on the housing.
  2. Install the water pump feed pipe on the thermostat housing with the mounting bolts. Tighten 89 in-lb (10 Nm).
  3. Fill the cooling system.
2006-2007 To Remove:
  1. Drain the cooling system.
  2. Disconnect the radiator outlet hose from the surge tank and thermostat housing cover. Thermostat & cover gm-03-39-3601.gif
  3. Remove the mounting bolts and remove the thermostat housing cover.
  4. Remove the thermostat from the housing. Discard the O-ring.
To Install:
  1. Using a new O-ring, install the thermostat on the housing.
  2. Install the thermostat housing cover with the mounting bolts. Tighten 89 in-lb (10 Nm).
  3. Connect the radiator outlet hose to the surge tank and thermostat housing cover.
  4. Fill the cooling system.
3.5L Engine (LZ4) W/ Variable Valve Timing & 3.9L Engine To Remove:
  1. Drain the cooling system.
  2. Remove the air cleaner outlet duct.
  3. Disconnect the radiator outlet hose from the thermostat housing. Thermostat 3.9L gm-03-00-3054.gif
  4. Remove the mounting bolt/stud and remove the thermostat housing.
  5. Remove the thermostat from the engine.
  6. Clean the sealing surfaces.
To Install:
  1. Using a new gasket, install the thermostat on the engine.
  2. Install the thermostat housing with the mounting bolts. Tighten 89 in-lb (10 Nm).
  3. Connect the radiator outlet hose to the thermostat housing.
  4. Install the air cleaner outlet duct.
  5. Fill the cooling system.
  6. Check the cooling system for leaks.
3.5L Engine (LX9) W/O Variable Valve Timing To Remove:
  1. Drain the coolant.
  2. Disconnect the radiator hose from the thermostat housing. Thermostat 3.5L gm_mv_ven_tstat.gif
  3. Remove the mounting bolt/stud and remove the thermostat housing.
  4. Remove the housing gasket.
  5. Remove the thermostat.
  6. Clean the mating surfaces.
To Install:
  1. Install the thermostat on the engine.
  2. Install the thermostat housing and gasket with the mounting bolts. Tighten 18 ft-lb (25 Nm).
  3. Connect the radiator hose to the thermostat housing.
  4. Fill the cooling system.
  5. Check the cooling system for leaks.

Jan 29, 2011 | 2005 Chevrolet Malibu

1 Answer

Need instructions for replacing thermostat on a 2001 Grand Cherokee 4.7 litre


Do not loosen radiator drain **** with system hot and pressurized. Serious burns from coolant can occur.

NOTE Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse. If thermostat is being replaced, be sure that replacement is specified thermostat for vehicle model and engine type.
Instructions

  1. Locate the Cherokee's thermostat intake housing by following the top radiator hose to the engine. The hose connects to the thermostat intake. A second, smaller hose connects to the left side of the radiator hose. This is a bypass hose for the heater.
  2. Remove the two bolts that secure the Cherokee's thermostat intake housing to the engine with a socket and ratchet and lift the intake upward to drain the coolant in the hose back into the radiator.
  3. Remove the gasket and the thermostat from the engine and discard them. Wipe the mating surfaces of the thermostat intake housing and the engine off with a clean towel.
  4. Place the new thermostat, spring down, into the engine and place the thermostat gasket over the thermostat.
  5. Place the thermostat intake housing onto the thermostat gasket. Thread the bolts into the thermostat intake by hand to avoid cross-threading the bolts and then tighten them using a socket and ratchet.
Additional information:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on timing chain cover.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 115 inch lbs. (13 Nm).
    CAUTION Housing must be tightened evenly and thermostat must be centered into recessed groove in timing chain cover. If not, it may result in a cracked housing, damaged timing chain cover threads or coolant leaks.
  5. Install lower radiator hose on thermostat housing.
  6. Install splash shield.
  7. Lower vehicle.
  8. Fill cooling system.
  9. Connect negative battery cable to battery.
  10. Start and warm the engine. Check for leaks.
Good Luck and if this helps don't forget to vote.

Jan 15, 2011 | 2001 Jeep Grand Cherokee

2 Answers

How do I install a thermostat on a 1999 jeep grand cherokee v8 4.7 engine


Hello,

To install a thermostat on Your 1999 grand cherokee jeep. You will be needing these instruments, Container, Clamp tool or vise-grip pliers, Thermostat and gasket, 10mm socket or wrench, Razor blade, Flathead screwdriver (if necessary). Then You carefully follow the steps below:
  1. Open drain **** on the radiator to drain the coolant from your Jeep Grand Cherokee. This drain **** is located on the lower right side facing the rear of your Cherokee. Use a seal able container and reuse the coolant if it is relatively new and clean.
  2. Follow the upper radiator hose to the point where it meets the thermostat housing. The thermostat is located inside the housing. Use a clamp tool or vise-grip pliers to loosen the clamp holding the hose to the housing. Work the end of the radiator hose free of the thermostat housing.
  3. Remove two bolts holding on the thermostat housing cover. Pull off the cover. Take note of the position of the old thermostat. Remove and install the new thermostat in exactly the same position.
  4. Scrape off residue of the old thermostat gasket from the inside of the thermostat housing cover using a razor blade. Avoid getting any debris inside the thermostat housing.
  5. Install the new gasket. Reattach the thermostat housing cover and radiator hose. Start your Jeep Cherokee and run the heater on high. Allow the engine to warm up. Check for leaks.
Those are the steps to follow to install your thermostat.
Hope this was helpful. Thank You for using fixya!!!

Jan 12, 2011 | 1999 Jeep Grand Cherokee

1 Answer

Need to change engine thermostat on 2002 saturn vue. would like diagrams on how to and what to look for.


2.2L Engine To Remove:
  1. Drain the cooling system.
  2. Remove the exhaust manifold heat shield.
  3. Remove or disconnect the following:
  4. Thermostat housing to water pump feed pipe chevy_cav_02-04_tstat.gif
  5. Remove the thermostat cover bolts from the thermostat housing.
  6. Remove and discard the thermostat housing O-ring.
  7. Thermostat assembly saturn-03-22-4279.gif
  8. Twist the water feed pipe while pulling to remove it from the water pump. Remove the water pipe from the water pump assembly.
  9. Remove and discard the seals from the water pipe.
  10. Remove the inner thermostat sleeve.
  11. Remove the thermostat assembly.
To Install:
  1. Install the thermostat cartridge into the thermostat housing while aligning the cartridge tangs up with the thermostat housing bolt holes. This will assure the inner sleeve can be completely installed.
  2. Align and insert the inner sleeve notch into the thermostat housing. If the inner sleeve notch is not properly positioned, the sleeve will not completely seat into the housing.
  3. The water feed pipe seals can be slightly lubricated with silicone gel to aid during installation. Install a new O-ring on the water pipe.
  4. Position the water pipe into the water pump assembly.
  5. Seat the water feed O-ring by pushing and twisting toward the water pump. Take care not to tear or damage the O-ring.
  6. Install the thermostat housing cover to the water pipe. The water feed pipe has a locating tab to assure proper alignment.
  7. Install a new thermostat housing cover seal into the recess groove.
  8. Position the thermostat housing cover into position.
  9. Install the thermostat housing cover bolts and tighten bolts to (89 in-lb 10 Nm).
  10. Install the exhaust manifold heat shield.
  11. Fill the cooling system.

Dec 24, 2010 | 2002 Saturn VUE

1 Answer

I need to know where the thermostat goes on 2002 jeep liberty 6cy?


just left of the crankshaft pulley

a56facc.gif
  1. Disconnect negative battery cable at battery.
  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Remove splash shield.
  5. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  6. Remove thermostat housing mounting bolts, thermostat housing and thermostat .
To install:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on housing assembly. Make sure rubber seal locating tab is positioned in the corresponding notch in the housing.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 105 inch lbs. (12 Nm) torque.
  5. Install lower radiator hose on thermostat housing.
  6. Install splash shield.
  7. Lower vehicle.
  8. Fill cooling system.
  9. Connect negative battery cable to battery.
  10. Start and warm the engine. Check for leaks.

Oct 04, 2010 | Jeep Liberty Cars & Trucks

2 Answers

Where is the thermostat located


77f1c56.jpg

Fig. The location of the thermostat and its housing on the 3.7L engine

  1. Disconnect negative battery cable at battery.
  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Remove splash shield.
  5. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  6. Remove thermostat housing mounting bolts, thermostat housing and thermostat .
To install:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on housing assembly. Make sure rubber seal locating tab is positioned in the corresponding notch in the housing.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 105 inch lbs. (12 Nm) torque.
  5. Install lower radiator hose on thermostat housing.
  6. Install splash shield.
  7. Lower vehicle.
  8. Fill cooling system.
  9. Connect negative battery cable to battery.
  10. Start and warm the engine. Check for leaks.

Hope helps (remember rated and comment this).

Aug 06, 2010 | 2002 Jeep Liberty

1 Answer

CHANGE THERSTAT ON 2002 JEEP LIBERTY


3.7L Engine - Thermostat
  1. Disconnect negative battery cable at battery.
  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Remove splash shield.
  5. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  6. Remove thermostat housing mounting bolts, thermostat housing and thermostat .

    a105ca1.jpg
    Fig. The location of the thermostat and its housing on the 3.7L engine (click for zoom)
To install:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on housing assembly. Make sure rubber seal locating tab is positioned in the corresponding notch in the housing.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 105 inch lbs. (12 Nm) torque.
  5. Install lower radiator hose on thermostat housing.
  6. Install splash shield.
  7. Lower vehicle.
  8. Fill cooling system.
  9. Connect negative battery cable to battery.
  10. Start and warm the engine. Check for leaks.

Hope helps (remember rated this).

Aug 04, 2010 | Jeep Liberty Cars & Trucks

3 Answers

98 Ford Explorer SOHC 4.0 V6 Water Leak


take it to a mechinc shop and have them do a pressure test

May 16, 2010 | 1998 Ford Explorer

1 Answer

Overheating,how would change the thermostat


YOU NEED A HAYNES REPAIR MANUAL.BUT YOU DRAIN OUT SOME COOLANT DOWN ENOUGH WHEN YOU TAKE THERMOSTAT HOUSING OFF TO GET TO THERMOSTAT.ANTIFREEZE WONT GO EVERY WHERE.TO GET STARTED YOU HAVE TO REMOVE RADIATOR SUPPORT COVER.AND THE AIR FILTER HOUSING.LOOSEN THE HOSE CLAMP.THEN DETACH THE HOSE FROM THERMOSTAT HOUSING.THEN REMOVE THERMOSTAT COVER MOUNTING BOLTS THEN REMOVE HOUSING.BE PREPARED FOR SOME COOLANT TO SPILL WHEN YOU REMOVE HOUSING AND BREAK THE SEAL.BE SURE TO REMOVE ALL TRACES OF OLD GASKET MATERIAL AND OR SEALANT FROM HOUSING COVER.THEN INSTALL THE NEW THEERMOSTAT IN THE HOUSING WITHOUT USING SEALANT.MAKE SURE SPRING END IS DIRECTED INTO THE HOUSING.APPLY CLEAN ANTIFREEZE TO THE NEW O - RING ON THERMOSTAT FOR LUBRICATION BEFORE INSTALLATION.PUT EVERYTHING BACK VISA VERSA.TORQUE THERMOSTAT HOUSING BOLTS TO 89 INCH POUNDS.PUT HOSES TIGHTEN HOSE CLAMP.FILL UP THE COOLANT SYSTEM CRANK CAR CHECK FOR LEAKS.

Feb 16, 2010 | 1998 Cadillac DeVille

1 Answer

Where is the engine water thermostaton my Grand Cherokee 2.7 CRD


  1. Disconnect negative battery cable at battery.
  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Remove splash shield.
  5. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  6. Remove thermostat housing mounting bolts, thermostat housing and thermostat.
To install:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on timing chain cover.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 115 inch lbs. (13 Nm).

Dec 06, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
1992 Nissan Stanza Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...