Question about 2006 Chevrolet Impala
Take a look and see if the brake lights are working,the power to release the shift lock comes from the brake switch when you step on the brake the shifter is unlocked. i had a few of these that needed new brake light switches, first try starting the car and stepping on the brake pedal as hard as you can and then try shifting,if this works replace brak switch, next if that doesnt work check the brake light to see if they work if not or if so check all fuses even under the hood fuse box, hope this helps. here a picture of the shift release soleniod it on the steering column, dissconnect and slide by hand to release shifter until repaired.
Posted on Sep 05, 2010
Check the brake swith some cars wont shift without depressing the brake switch
Posted on Sep 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The automatic transmission shift lock control switch.
The park/neutral position switch.
With the ignition in the ON position, battery positive voltage is supplied to the park/neutral position switch. When the transmission is in the PARK position the contacts in the park/neutral position switch are closed. This allows current to flow through the switch to the automatic transmission shift lock control switch. The circuit continues through the normally-closed switch to the automatic transmission shift lock control solenoid. The automatic transmission shift lock control solenoid is permanently grounded. This energizes the automatic transmission shift lock control solenoid, locking the shift linkage in the PARK position. When the driver presses the brake pedal the contacts in the automatic transmission shift lock control switch open, causing the automatic transmission shift lock control solenoid to release. This allows the shift lever to move from the PARK position.
Park Lock Solenoid
The park lock solenoid is a safety device that prevents an inadvertent shift out of PARK when the key is in the OFF position. The key must be in the RUN position to release the park lock solenoid. The system consists of the park lock solenoid. With the ignition in the ON position, voltage is supplied to the park lock solenoid. The park lock solenoid energizes through a permanent ground unlocking the shift lever. With the ignition in the OFF or ACCY position the park lock solenoid de-energizes and locks the shift lever in the park position.
Shift Lever Does Not Move with Brake Pedal Depressed
DEFINITION: Transmission shift lever will not move out of the PARK position with the ignition ON and the brake pedal pressed.
Did you perform the Symptoms - Automatic Transmission Shift Lock Control tests and all the necessary inspection?
Go to Step 2
Go to Symptoms - Automatic Transmission Shift Lock Control
Oct 13, 2015 | 2006 Hummer H2
Jan 14, 2013 | 2008 Chevrolet Impala LTZ
Jul 04, 2017 | Pontiac Grand Prix Cars & Trucks
Jan 03, 2011 | 2004 Chevrolet Impala
Jun 09, 2010 | 2006 Chrysler Pacifica
Nov 18, 2009 | 2008 Chevrolet Impala
Jul 29, 2009 | 2006 Chevrolet Impala
Dec 20, 2008 | 1998 Land Rover Discovery
Sep 15, 2008 | 2006 Chevrolet Aveo
922 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: