Question about 1992 GMC Sierra K1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the injectors are fired thru the engine cotrol module but it gets its signal to fire from the pick-up located inside the distributor if you are loosing injector pulse only the ignition module is bad if you are also loosing spark when you loose injector pulse your pick up is causing the problem if you replace the pick-up i recomend you change the ignition module when doing so because they work together and you have to remove the distributor to change the pick-up
Posted on May 31, 2009
The ignition module located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as well as the signal to run the fuel pump and the dwell signal timing to fire the ignition coil. A faulty ignition module can cause any one of these systems to malfunction.
That does sound like a malfunction with the ignition module inside of the distributor, and you can remove the ignition module and have it tested for free at most auto part stores.
If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and the ignition module will burn up without it.
To install the new ignition module first clean out the mounting surface inside of the distributor. Then completely coat the metal contact surface under the ignition module with a thick coat the silicone grease or die-electric compound and do not leave any of the metal contact surface of the ignition module un-coated with the silicone grease or die-electric compound, and be very careful not to over-tighten the ignition module or it will be damaged.
Posted on Jun 22, 2010
SOURCE: 2002 chevy Blazer hard starting
This sounds like the fuel pump is shot. The pump has a 'dead' spot and when the engine is started by using 'nasty' starting fluid it will go to the running mode and run fine. Never use starting fluid!!! A bit of gas is best, just use common sence. Frankster016
Posted on Nov 26, 2008
Try using a good fuel line/injector cleaner Seafoam is a good one. If this does not help you may have tone or more clogged injectors. Clean these out and you should be good to go. tTo see Seafoam in action goto you tube type Seafoam into the search box.
Posted on Jul 08, 2009
Tips for a great answer:
Aug 08, 2016 | Cars & Trucks
Feb 10, 2016 | Cars & Trucks
Dec 10, 2015 | Cars & Trucks
Dec 10, 2015 | Cars & Trucks
Jun 04, 2015 | Cars & Trucks
May 06, 2014 | Cars & Trucks
Feb 10, 2014 | Cars & Trucks
Apr 23, 2013 | 1997 Chevrolet K1500
Aug 30, 2011 | 1992 Chevrolet C1500
Nov 16, 2010 | 1991 GMC Sonoma
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: