Question about 2000 Dodge Grand Caravan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 dodge grand caravan
check the fan blower relay. this is the one powering up the blue wire going to the motor.
maybe it has a separate fuse. check from other locations. could be in the passenger kick panel.
tnx 4 using fixya,
Posted on Oct 19, 2008
If you have the heater control up front on the floor or on defrost you should check that the heat is not blowing from under the d/p seats. If you move the heater control to dash you should have it coming out the top vents.
You could be having a coolant problem and need to check that first, If coolant level is normal you might have a thermostat going out. Both will cause your heat not to warm up at normal speed. If you need any thing let me know.
Posted on Jan 16, 2009
probablt front blower motor or switch,can test blower motor by running auxiliary power and growd to front blower motor.Can test switch with DVOM.
Posted on Jun 16, 2009
do this calibration reset, it will usually rest he lights and the ac will work again, if it doesn't reset you have a part failure and the dealer you need to hook a Chrysler scan tool to diagnose the problem.
CALIBRATION/DIAGNOSTICS TEST ENTRY
TO INITIATE TESTS:
Set Blower motor ON HIGH
Set Mode position to Panel
Set Temperature to Cold (Both slide pots if equipped)
Depress WASH and REAR WIPER button simultaneously for 5 Seconds (Until all LED's light)
All LED's will turn on for 5 Seconds
Calibration Test is running when REAR WIPER and INTERMITTENT are alternately flashing. Cooldown test is running if A/C and RECIRC are alternately flashing.
Acceptable results is REAR WIPER LED is the only LED flashing. Push Rear Wiper to exit.
After all tests have passed, Calibration Diagnostics and Cooldown can be run separately
Posted on Jul 26, 2009
Tips for a great answer:
Apr 01, 2017 | 2000 Dodge Grand Caravan
Dec 01, 2010 | 2000 Dodge Grand Caravan
May 17, 2010 | 2001 Dodge Grand Caravan
Nov 22, 2009 | 2004 Dodge Grand Caravan
Sep 04, 2009 | 2000 Dodge Caravan
Nov 11, 2008 | 2000 Dodge Caravan
227 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: