Question about 2006 Chevrolet Silverado 3500

1 Answer

2006 duramax 6.6 litre won't turn over even with boost . when ignition key is turned to start position the info lights flash and there is a clicking sound . I just finished changing the fuel filter , had started the truck to be sure it would start , then shut it off . This is when I tried to reset fuel filter light by turning key to on position and pressing the throttle 3 times , since then it won't turn over . I hope you can help as I am in the countryside , far from help !!!! THANK YOU VERY MUCH

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to use two charges when my battery died, replaced both batteries, all is good. On the fuel filter end you need to fill the filter first and then start it, but as you have already run the fuel out of the lines you will need to loosen the air inlet tube and spray silicon lube while someone cranks the vehicle and continue until the engine will prime itself.

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 chevy equinox was running great all the sudden shut off and wont crank back. ive checked fuses now it wont even turn over. im at a loss


Is the battery good , cables and connections ? Do the headlamps turn on ? If so are they bright ? When you turn the key to on do the instrument cluster gauges move , warning light's come on then go off after 2-3 seconds ?Is the security light lit ? (anti-theft) Need more info !!!!!! Do you know how to do automotive electrical testing ? Find a electrical distribution diagram at http://www.bbbind.com/free_tsb.html Get yourself a DVOM - digital volt ohm meter and test for voltage , don't just look at fuse's . A fuse can be good ,but that doesn't mean a thing if there isn't B+ voltage there. Check out some videos on basic automotive electrical testing , how to read a wiring diagram . Also break down and buy a service repair manual . When you turn the key to start do you hear the starter solenoid click ?
Starter Solenoid Does Not Click diagnosis
Turn the ignition switch to the START position.
Is the security indicator On?
YES - Go to Security Indicator Always On or Flashing in Theft Deterrent
NO - Go to Step 3
3
Turn the ignition switch to the START position.
Does the starter solenoid click?
YES - Go to Starter Solenoid Clicks, Engine Does Not Crank
NO - Go to Step 4
4
With a scan tool, observe the Crank Request Signal parameter in the Engine Electrical powertrain control module (PCM) data list.
Turn the ignition to the START position.
Does the scan tool display that the Crank Request Signal parameter is Yes?
Go to Step 5
Go to Power Mode Mismatch in Computer/Integrating Systems
5
With a scan tool, observe the Starter Relay Command parameter in the PCM data list.
Turn the ignition switch to the START position.
Does the scan tool display that the Starter Relay Command parameter is ON?
Go to Step 7
Go to Step 6
6
Turn ON the ignition, with the engine OFF.
Verify that the transmission is in Park or Neutral.
With a scan tool, observe the TR Sw. parameter in the PCM data list.
Does the scan tool display Park or Neutral?
Go to Step 7
Go to Range Selector Displays Incorrect Range in Automatic Transaxle - AF33-5

Jan 28, 2017 | Cars & Trucks

Tip

How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe


Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident. <br /> The flashing light on your car is telling there is a problem. <br /> <br /> <b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b> <br /> Ignition Key Method: <br /> <ul> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 2 seconds.</li> <li>START Car (the light may be blinking slower than before).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 3 seconds.</li> <li>START Car.</li></ul> <br /> <b>This is a little easier</b> To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away

on Dec 07, 2010 | Infiniti G35 Cars & Trucks

1 Answer

Mazda 2006 Tribute 6 cy - why is dashboard key light on when key not in but goes off when driver door is opened?


Hi I am a tech mechanic I deal with things like that Evey day lol but sounds like the anti theft or the ignition switch n lock n key to but you also have broke wires touching even in thecolom

Oct 21, 2015 | 2006 Mazda Tribute

1 Answer

2005 ford 500, won't start a lock light is


need to reprogram ignition key security system when battery disconnected. turn ignition key to the on position for 3 to 10 seconds until the lock light goes out then start vechicle.if lock light dont turn off turn ignition switch to on position 30 seconds until lock light turn off.

Jun 12, 2013 | Cars & Trucks

2 Answers

I changed the battery in my 2001 Toyota Sienna and now my radio won't work.


Press station 1 and 6 and turn the ignition key to on position but donot start the vehicle, you will see the unlock code flashing, note the number that is your radio code, read your vehicle manual and insert code to unlock.

Aug 11, 2011 | 2006 Toyota Sienna

1 Answer

2003 alero steering won't lock and nothing happens when you turn the key in the ignition


If the security light keeps flashing,you might as well do a reset.
Be sure to turn off all the accesories including the radio before you start the process.
Insert the key to the ignition switch and turn the key to ON position without starting the car.
leave it ON until the flashing light (security) stops.It will take approximately 15 to 20 minutes.
As soon the flashing stop,turn the key to OFF
position and start the cart.
Hope this help.

Jul 23, 2011 | 2003 Oldsmobile Alero

1 Answer

Purchased a new clicker.from g/m.i can't program it.i have replaced the transformer under the dash panel that was used.. i have been told 96 models has several transmitters on it.


1. Move all Keyless Remotes out of range of vehicle. (10 to 15 feet)
2. Turn ignition key to the ON position.
3. Push the TRIP/ODO button on the DIC (Driver Info Center) twice.
4. Within 5 seconds, push & hold the FUEL INFO button on the DIC until
the PKE light comes on and stays on.
5. Turn the ignition to the OFF position, but leave the key in the ignition.
The PKE light will begin flashing.
6. Bring one Keyless Remote into range. The PKE light will stop flashing
and stay on to show the code is stored. Move the Keyless Remote out
of range. The PKE light will begin flashing indicating the system is ready
for the next Keyless Remote.
7. If more than one Keyless Remote is being programmed, move the first
Keyless Remote out of range and repeat step 6 for any additional Keyless
Remotes. Up to three Keyless Remotes can be programmed.
8. To turn off the programming mode, simply remove the key from the ignition
or turn the ignition switch on.
9. The programming mode will shut off after two minutes if.
A) You have not programmed any Keyless Remotes.
B) Removed the key from the ignition.
C) After three Keyless Remotes have been programmed.

Good luck and keep me posted.

Jan 23, 2010 | 1996 Chevrolet Corvette

1 Answer

Maintenance light flashing


h) Engine Oil Replacement Reminder
Light (for vehicles sold in U.S.A.)
This light reminds you when to replace
the engine oil.
This light will come on when the ignition
key is turned to “ON” and will go off after
about a few seconds.
When you drive for about 8000 km (5000
miles) after the engine oil replacement,
this light illuminates for about 3 seconds
and then flashes for about 12 seconds
with the ignition key turned to “ON” position.
If you continue driving without the
engine oil replacement, and if the driving
range exceeds 12000 km (7500 miles), the
light will come on after the ignition key is
turned to “ON” position. The light will remain
on thereafter.
If the light is flashing, we recommend that
you replace the engine oil at an early
opportunity depending on the driving and
road condition. If the light comes on, replace
it as soon as possible.
You need to reset the light after the engine
oil replacement. Reset the light by
following the procedure below:
1. Turn the ignition key to the “OFF” position
with the odometer reading shown.
(For details, see “Odometer and two
trip meters” on page 136 in this Section.)
2. Turn the ignition key to the “ON” position
while holding down the trip meter
reset button.
Hold down the button until the light goes
off. Before the light goes off, it illuminates
for 3 seconds, flashes for 2 seconds and
illuminates for 1 second.
If the system fails to reset, the light will
remain flashing.


I copied this from page 143 of the owners manual for the 2004 4Runner

Jun 04, 2009 | 2004 Toyota 4Runner

4 Answers

Maintenance info


Volvo V50 Maintenance Light Reset

1. Press and hold trip odometer reset button 
2. Turn ignition key to run position KPII (not the start position) 
3. Wait 30 seconds or until service light begins blinking 
4. Release Trip Odometer button 
5. Turn ignition to off position 

Oct 22, 2008 | 2006 Volvo V50

Not finding what you are looking for?
Cars & Trucks Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...