Question about 1987 Chevrolet Blazer

1 Answer

No gas going to carbartor only if i put a little in to the carbartor in starts

Posted by on

  • Mike Sep 05, 2010

    Look into carb rebuild, sound like accelerator pump issues

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It sounds like you may have a air leak in your fuel line such as a loose or bad connection at the tank , also your fuel pumpneeds replaceing as the check valve in the pump itself is not working whitch means that it has a small piece of forign substance lodged in the valve it self .

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Car wont start


may have a air blockage in fuel line take one of the plugs out and add couple drops of gas try again.

Feb 09, 2014 | 1996 Buick Park Avenue

3 Answers

I have a 2001 dodge stratus I ran out of gas I put more in and now it will not start


Go put your key in the inigtion turn it to the on position lisen if you can't hear your fuel pump that means it went out due to lack of gas.
you might have to go to the back pf the car by the gas tank so that you can tell if it is working.

Dec 30, 2012 | Cars & Trucks

1 Answer

88 suzuki quadrunner 300 idle problems


You could try using petrol rather than gas to start it.
Also run it off petrol rather than gas.

May 07, 2017 | Cars & Trucks

1 Answer

Car stalls out at idle. Whether its just left running in a parking lot or I come off the highway, stopping at my first traffic light. I repalced a very dirty air filter, but it hasn't solved the...


mafs cleane it it is on your air flow tube that conects to your carberator just be care full not to drop it spray it with mafs cleaner start the car but dont press on the gas on use carbartor cleaner on the carberator only ok dont press the gass at all let it start on it's own and when it starts use a pice of some thing to hold the carb open and spray it a little at a time..do it in a well open area..

Sep 14, 2011 | 2004 Chevrolet Cavalier

1 Answer

Changed fuel pump on 1991 ford explorer and ran out of gas put some more gas in now wont start


take the air breather off and put a little gas in the carburetor but not to much the carb can back fire let it set for a couple of mins. then try starting it,when it starts it going to sound a little rough till u put the breather back on then it should calm down

Apr 02, 2011 | 1991 Ford Explorer

1 Answer

87FordRanger 5spd 2.9l. Bad starter. Truck sat for month and a half with very little gas. Changed starter for rebuilt. Put in gas. Motor turned over, but no start. Tried a few more times. No start. Last...


Your starter solenoid stuck on. (This may be internal to the starter). You need to replace the solenoid (or starter), then get the battery charged, and try again. If this has a carburetor (rather than fuel injection), you may need to prime it with starter fluid or a little gas in the throat of the carb (put the air filter assembly back on before you try to start it, you don't want to start a fire).

Sep 05, 2010 | 1987 Ford Ranger

1 Answer

Ran out of gas on 2.2 turbo put gas in and will not start


Hope you did not run the fuel pump too long without gas. Not good for it.

But you probably now have too much air in the line.
Open the port on the fuel rail where you would normally check fuel pressure.
Turn key on and off until it comes out this port.
Then close it up and try again.
If you heated up the cold start thermo timeout, try a little starting fluid just to get it going. If you don't have any, a little gas down the intake should work almost as well.

Aug 13, 2010 | 1986 Chrysler LeBaron

1 Answer

Too much gas in carb


Check the timming.And make sure the HT leads ar fitted corectly.

May 30, 2009 | 1984 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...