Question about 2004 Pontiac Grand Am

1 Answer

My turn signals and emergency lights are out and I'm told it's the relay switch or flasher but nobody carries them or knows where it's at even to check it please help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your 2004 is the same as my 2003 the flasher for the hazard lights also runs the turn signals. The flasher is actually attached to the hazard button. You have to pop off the plastic dash panel that surrounds the buttons, radio, ignition switch, and cigarete lighter. Remove the wires and there is a bracket that holds the buttons on that has three screws, Remove these and the button/flasher will slide out forwards throught the panel. The one i just replaced 2 weeks ago cost $22.00 at a local parts store.

Hope this helps.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

Where is the emergency flasher relay for 1993 Buick Century?


check to make sure there is a relay for the hazard lights as normally the switch just connects the 4 flashers and works thought the indicator flasher unit.

Jun 22, 2015 | 1993 Buick Century

1 Answer

Turn signal flasher location


located under dash to left of the steering colume. note there are 2 flasher relays one for the emergency flashers and the other is the signal flasher. to know which one is the signal one turn on the emergency lights and look for the flasher the one that is clicking is the e-flasher. the signal flasher looks the same locate it and replace.

Jul 05, 2014 | 1988 Plymouth Reliant

1 Answer

My turn signal flashers are all out but emergency blinkers work, I replaced the flasher relay switch but it did not help


try to test turn signal switch, which its the live wire is not sending signal to the flasher.

Mar 07, 2013 | 1990 Buick Century

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

2 Answers

LEFT TURN LIGHTS WILL NOT WORK ON 1993 TROOPER


believe it or not, a 4 way flasher can cause this even if it itself is working properly, otherwise flasher, bulbs, or switch is bad .

Oct 06, 2009 | 1993 Isuzu Trooper

1 Answer

1991 Ford E150 turn signals do not work,emergancy flashers flash constantlly unless the flasher relay is unplugged from fuse block


Hi,

If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.

Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 05, 2008 | 2003 Ford E150

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...