Question about 1995 Dodge Grand Caravan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 Dodge grand caravan
It would appear that the relay is located on the cross rail that runs across the front of the vehicle (in front of the radiator). I found out that it is riveted in place by a single rivet, so in order to replace mine, I will have to remove the rivet and use a self-tapping screw to secure a new one.
The fan relay is located in the fuse panel located under the hood beside the battery. It will be marked under the lid. Make sure you check the maxi fuse for the fan also.
Posted on Mar 02, 2009
Draining & Filling
To avoid serious injury, allow the engine to cool before opening any part of the cooling system. The coolant is under pressure and may boil if the pressure is released while the coolant is hot.
Allow the engine cooling system to cool and open the drain at the lower left side of the radiator before removing the pressure cap. This will drain the coolant from the reservoir.
After the coolant reserve container is empty, remove the pressure cap.
Remove the cylinder block drain plug(s).
Remove the radiator pressure cap and fill system with a 50/50 mix of good quality 5 Year/100,000 mile engine coolant and distilled water.
Continue filling radiator until full and install the cap.
Fill the coolant reservoir container to the MAX mark with the same coolant mixture.
Allow the engine to come to normal operation temperature and cool down completely and recheck the coolant level. Add coolant to between the MAX and MIN mark.
Posted on Mar 28, 2009
Make sure it's cool, pop the radiator cap, Remove the shield on the passenger side between the tire and front of engine. Relieve the tension on the serp belt,draw yourself a diagram of the pulleys and belt routing in case the sticker is gone on the strut tower, remove the serp belt. Take the bolts out of the pulley on the front of the water pump (3). Remove the lower radiator hose at the front cover to drain the coolant. Remove the 6 mm bolts holding the water pump to the front cover housing. tap on the pump with a rubber hammer. Install a new gasket on the new pump, and a weap hole diverter in the pump (round black about hte size of a quarter), use old one if there's no new one. Install pupm and tighten bolts snug with a 1/4" ratchet. Install pulley and 3 bolts. Install belt, top off radiator with 50/50 mix green coolant. start engine and run to operating temperature,make sure the belt is seated in all of the pulleys and is running true, radiator fans should come on. Shut engine down and let cool overnight. Check level in radiator and overflow bottle, top off as necessary.
Posted on Aug 26, 2009
Tips for a great answer:
May 03, 2014 | Dodge Grand Caravan Cars & Trucks
on Jan 06, 2010 | 1997 Dodge Caravan
Oct 21, 2011 | 1998 Dodge Caravan
Feb 28, 2011 | 1993 Dodge Caravan
Feb 17, 2011 | 1995 Dodge Intrepid
Mar 10, 2010 | 1995 Honda Passport
Jan 19, 2009 | 1997 Dodge Caravan
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: