Question about 1994 Ford F150 Styleside Supercab

Open Question

Valve adjustments on an inline 6 4.9l ford - 1994 Ford F150 Styleside Supercab

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I check valve adjustments on 95 Ford F-150 inline 6 cylinder 4.9L. And are they hydraulic lifters?


all gas fords use hydraulic lifters and retainers for rockers are torqued to 18-25 Lb with that said I would say your valves are not adjustable

Sep 23, 2014 | Ford F-150 Cars & Trucks

1 Answer

What is the purpose of a inline water flow control valve. (Manual flow valve) in a F150 Truck


If you mean a valve in one of the heater hoses, it cuts hot water off from flowing thru the heater core. Its controlled by the temp switch on the dash.

Dec 19, 2012 | 2001 Ford F150 Styleside SuperCrew

1 Answer

My ford f 150 with a 300 inline six is idling rough but with run, runs good at high rpm but is running rich


I have a 1967 Ford F1oo with the in-line 300 6 cylinder that's running rough what could possibly be the problem The gentleman that I bought the truck from said it would be a burnt valve

Oct 21, 2012 | Cars & Trucks

1 Answer

How much does it cost to replace a starter in a 1998 Ford Contour 4cylinder engine?


It depends on the engine size.
For an InLine 4 Cylinder-122 2.0L CNG DOHC VIN Z SFI :$178.42
For an InLine 4 Cylinder-122 2.0L DOHC VIN 3 SFI : $178.42
For a V6-153 2.5L DOHC VIN L SFI : $152.93
For a V6-153 2.5L VIN G (24 Valve) SFI : $152.93

Hope this was helpful.

Dec 16, 2010 | 1998 Ford Contour

1 Answer

I have to adjust valve clearance on my ford 110 engine from 1994. year. Can you tell me right clearance of inlet valves and inlet valves


What engine do you have (size)? Valve adjustment is generally a thing of the past after the introduction of hydraulic lifters (no adjustment). In 1994 your engine should have hydraulic lifters and are not adjustable. Is this a high performance engine? New camshaft, lifter, and rocker set that are adjustable?

Aug 04, 2010 | Ford F-100 Cars & Trucks

1 Answer

My ford f150 4.9 inline 6 stalls when you


What engine code is stored in the computer? You may have a bad TPS (throttle postioning sensor), or a bad O2 sensor. Auto Zone can retrieve the code for you, and tell you what sensor it is related to.

Apr 24, 2010 | 1993 Ford F150 SuperCab

3 Answers

Where is the pcv valve in a 1997 ford escort wagon lx? Any where I can get a pic of where it is located?


If you look at your valve cover its at the back on the right, it comes up and then its an elbow, it comes over the top of the valve cover then down. the PCV valve is either the elbow or the piece in front of the valve cover after the elbow.

Jun 29, 2009 | Ford Escort Cars & Trucks

1 Answer

1996 Ford F-150 300 inline 6 timing gears/timing issue


u have to unplug the spout small gray plug on driver side in the eng comp . on the fender wall on plug that set timming thing it should b 10 deg b4 top dead center then plug spout back in comp will adv timming

May 31, 2009 | 1993 Ford F150 SuperCab

1 Answer

I have a 1991 Ford F150 4 x 4 inline 6 4.6L. Dual


your truck is a 4.9L, make sure you have power to the front tank fuel pump. is the power to the pump is ok and you can hear the pump run for a second or two when you key the vehicle on... replace the fuel tank selector valve

Apr 17, 2009 | 1991 Ford F150

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...