Question about 1996 Jeep Grand Cherokee

1 Answer

Needs catalytic converter .i need to know the sizes of the inlet and outlet pipe so i can use aftermarket part?

Posted by on

  • Richard Scordino Sep 05, 2010

    You can get that measurement by using an outside caliper or by wrapping a string around the pipe and measuring the circumference then dividing by 3.14 that will give you the outside diameter. For inside diameter subtract the wall thickness of the pipeX2.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

What model? What year? What engine?
How could anyone answer here without that info.

Get a piece of cardboard (not corugated) and scissors.
Cut a rectangular notch in the side of the carboard.
Try to slip it over the pipe where you want to measure.
Keep trimming until it JUST fits.
Measure that space with a ruler and you have the outside diameter of the pipe.


Aftermarket parts are available from major parts suppliers by providing make and model information at all the major parts web sites which I will not advertise the names. They will show you what they have that fits--- asuming all is still equal to orginal factory spec.

Be aware that while you don't have to purchase a CONVERTER from the dealer--- still in many locations the convertor has to meet the OEM specifications exactly (for example California). These will be less money than the dealer but not "cheap", because the part is certified for the application with the appropriate state or federal agency. I believe in general - stuff since 1997/98 falls into that category.

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size inlet does my car have its exhaust pipe?


Get under the car & measure whatever
pipe your talking about.
You know the engine size
How many choices are there in exhaust
pipes for one engine?

Jul 22, 2013 | 2007 Mitsubishi Eclipse SE

2 Answers

Need to know the location of the o2 sensors on a 2005 taurus.


front or back,before catalytic con. and after.

Mar 08, 2013 | 2005 Ford Taurus

3 Answers

Catalytic converter needs replaced, want to do it myself but need a set of instructions or a manual. thought i could find one on the internet but not having any luck.


Visit your local library and take a look at their motor manual collection for general instructions for this procedure.

Mar 03, 2011 | 2003 Toyota Highlander

1 Answer

I would like to know how many o2 sensors are in a 2003 jetta 1.8t gas.


If you can locate the catalytic converter the front O2 sensor , referred to as sensor 1 or S1 , is located in the inlet pipe for the catalytic converter , 6" to 12" upstream.
The rear sensor , referred to as sensor 2 or S2 , is located in the outlet pipe , 6" to 12" downstream.
The exact distance from the catalytic converter varies by engine type , i.e , 2.O liter ,1.8 Turbo

Nov 28, 2010 | 2003 Volkswagen Passat

1 Answer

How many calliact converters does a montero have?


I believe they only have a single, 3-way catalyst block w/2" inlet and outlet. However, they DO have two oxygen sensors. One in the pipe in front of the catalytic converter, and one in the pipe just after it.

May 10, 2010 | 1995 Mitsubishi Montero

1 Answer

Just had the exhaust welded to the catalytic converter because of rattling due to aftermarket front pipe and muffler. some rattling has returned. it seems to happen when i stop excellarating and coast at...


it needs to flex ,rigid is not good.you can purchase flex piping that will solve your problem, just find out the size of exhaust is on your vehicle.

Apr 25, 2010 | 2001 Mazda Protege

1 Answer

Where do we find the o2 sensor to replace it on 1996 ford explorer v-6 4.0


Item Part Number Description 1 52 Exhaust Inlet Pipe 2 N803420-S2 Exhaust Manifold-to-Inlet Pipe Bolts
(4 Req'd) 3 5E212 Three Way Catalytic Converter 4 5230 Muffler 5 N620482-S2 Exhaust Inlet Pipe-to-Converter Nut
(3 Req'd) 6 5B266 Exhaust Converter Inlet Pipe Gasket 7 N620481-S2 Nut 8 5E269 Exhaust Converter Frame Bracket 9 N620481-S2 Nut 10 5260 Exhaust Outlet Pipe Frame Bracket 11 5E269 Exhaust Converter Frame Bracket 12 39006 Screw and Washer 13 5E241 Exhaust Converter Outlet Gasket 14 5G215 Exhaust Pipe Flange Hold Down Spring 15 N802641-S2 Nut and Retainer 16 — Rear Heated Oxygen Sensor (HO2S) A — Tighten to 34-46 Nm
(25-34 Lb-Ft) B — Tighten to 20-25 Nm
(15-19 Lb-Ft) C — Tighten to 34-46 Nm
(25-34 Lb-Ft)

ee3a51c.gif

Apr 03, 2010 | 1996 Ford Explorer

1 Answer

84 s10 pipes


Yes, you have to order the same size. You also need a coupler that joins the pipe to the Cat.

Feb 20, 2009 | 1984 Chevrolet S-10

2 Answers

84 chevy s10


it will work you can always put a sleve inside and weld around your pipe and clamp your converter

Feb 20, 2009 | 1984 Chevrolet S-10

1 Answer

1984 chevy s10 exhaust


No, 2 pipes the same size will not go together. You will need to probably buy an adapter. Lets say you have a pipe 2 1/4 outer diameter "od" " that is measuring from the out side edges across the pipe, you will need a pipe with an inside diameter "id" of 2 1/4 . you get that measurement buy measuring the inside of the pipe. so a pipe with a 2 1/4 od will fit a pipe with 2 1/4 id. .. hope that helps

Best thing to do is take a piece of pipe from the truck and take the cat to the auto parts store and get all the adapters that way. That way you know for sure you got all the right parts.

Feb 20, 2009 | 1984 Chevrolet S-10

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...