Question about Jeep Grand Cherokee
IAC wiring. posted 100s of times this link....
this is in the fsm.
WJ jeep, it is (USA)
chapter 8w-30-16 ,exact page. under wiring. fuel ignition system.
and lots more there, DL it?
Posted on Mar 04, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The idle air control valve is located on the back of the throttle body. It has an oval electrical connector and two torx screws holding it in. Unplug the connector, remove the two screws then lightly tap the body with a soft faced mallet to loosen it from the body.
Once you have it out and prior to installing a new valve clean the seat inside the throttle body where the idle control fits. This must be very clean! Installation is in the reverse order.
To save some cash, pull the valve out and clean it with throttle body cleaner, this usually fixes the problem for quite a while.
Good luck and hope this helps.
Posted on May 28, 2009
You can check out the autozone.com website and register the vehicle. It's free and you will have access to an online repair manual for the vehicle. The steps for changing the belt and the routing diagram should be available there. Hope this helped and best wishes.
Posted on Aug 18, 2009
Testimonial: "That sounds like a great site to send me to. Thanx!"
Have a code test done (most larger parts houses will read codes for free)
Get yourself either a haynes or chilton manual and look up any codes and find what they are related to. Manuals will also list individual tests to components that you can do using a decent multi-meter.
Most common cause of a problem such as yours is either a failing crank position sensor or fuel pump but it can be caused by many other items including a loose connection at the ignition switch, coil etc. (why testing is important) Wish there was something simple like a "stalling out switch" you could replace, but there isn't!
Good luck and post back if you have a specific question about an individual part or system!
Posted on Jan 17, 2010
Tips for a great answer:
Oct 05, 2014 | 1996 Jeep Grand Cherokee
Feb 14, 2011 | 1999 Jeep Grand Cherokee
Jan 03, 2011 | 1996 Jeep Grand Cherokee
Dec 30, 2009 | 2003 Jeep Grand Cherokee
Nov 18, 2009 | 1997 Jeep Grand Cherokee
Sep 08, 2009 | 2000 Jeep Grand Cherokee
Aug 11, 2009 | 2003 Jeep Grand Cherokee
Mar 27, 2009 | 2002 Dodge Grand Caravan
198 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: